I am running 2.6 on a Solwise SAR-600EW. My ISP is currently rolling out ADSL2+. Is there anyway within the firmware that I can check whether or not the ADSL2+ has been activated on my line?
TIA,
H.
Detect ADSL2+?
Unless they connect you to that kit no, it'll be a seperate DSLAM or at the very least seperate line cards so until you are moved from plain old ADSL to one of those there is no way to check. Which ISP? If you are in the UK keep an eye on Samknows, it should indicate when the exchange is upgraded with LLU.
- Shotokan101
- RouterTech Team
- Posts: 4779
- Joined: Thu Jan 26, 2006 3:17 pm
- Location: Glasgow, Scotland
My current stats on ADSL2MUE with RT2.6 (8Mbps capped TalkTalk service)
Code: Select all
Modem Status
Connection Status Connected
Ds Rate (Kbps) 8124
Us Rate (Kbps) 444
DS Margin 17
US Margin 24
DS Line Attenuation 18
US Line Attenuation 9
Trained Modulation ADSL_2plus
LOS Errors 0
Peak Cell Rate 1047 cells per sec
CRC Rx Fast 218
CRC Tx Fast 0
CRC Rx Interleaved 0
CRC Tx Interleaved 0
Path Mode Fast Path
[quote="mstombs"]My current stats on ADSL2MUE with RT2.6 (8Mbps capped TalkTalk service)
I guess that line is the clue!
Code: Select all
Modem Status
Trained Modulation ADSL_2plus