Helo, i hope some one can help me... a few month ago i try to update my firmware router.
Router model and brand is MSI RG60SE... and update for firmware i download from some site, not from MSI becouse i can find there
for this model... after i update firmware (disconect from wireless so i belive process not complete\intrerupted) can not access web interface and wireless point is unavailable from any device. Al light are on "PWR, WAN , lan 1; 2 ; 3 ; 4" just 2 are off SYS and WLAN.
I read some replay about "connecting to serial" i hope someone can help me if it's the only way.

http://www.routertech.org/viewtopic.php?t=335 = not working

following details:

Router : MSI RG60SE
router's firmware : 3.5.3 Build 070416 Rel.38958n
What bootloader (and bootloader version) : ?
specific RouterTech firmware you tried : 3.7.2 Build 080303 Rel.57149n msi
upgrade via ethernet or wireless connection : Wireless ()
upgrading via the web interface or PC Tool : Web Interface
error or problem while upgrading the firmware : if i remember correctly,no error just disconect from router
reset router to factory defaults : before upgrading no reset and now reset not working
detail the current state of your router : web interface = can not access.
: wireless not detect the presence
: Pwr, WAN, Lan 1 2 3 4 = on all time no blinking.
: SYS and WLAN = are off all time.
switch router off 5 minutes after on. : happens nothing.
contents original /proc/ticfg/env or
/proc/sys/dev/adam2/environment : ?

If anybody can help and have some time for me plz pm soon.
Thank you in advance for your time.

Katallyn

Your router is not supported by RouterTech firmwares. It sounds like you have bricked it. I cannot see any serial or jtag pins on the system board, so I suspect that you are stuck with the brick. You might as well look for a new router.