X-Lite/Netgear TA612V and Sipgate
-
- Newbie
- Posts: 5
- Joined: Thu Jan 04, 2007 1:36 pm
OK, I got into the TA612v after a lot of mucking about, but after resetting my 3Com back to its original settings I can't get to the remote management.
Also it looks like my sipgate already has a sipgate number, which does not seem to correspond to mine. If this has already been opened and registered, how can I reset it?
Also it looks like my sipgate already has a sipgate number, which does not seem to correspond to mine. If this has already been opened and registered, how can I reset it?
-
- Novice
- Posts: 14
- Joined: Fri Jan 05, 2007 5:26 pm
- Location: Uk
- Contact:
Firmware
Dose anyone have the firmware version V1.2_73, for sipate, for the TA612V.
I Have 2 TA612V's sitting behind one wan router and i ended up turing on STUN to get them both working, as one kept dissconnecting the other, they both seem to work now though.
I Have 2 TA612V's sitting behind one wan router and i ended up turing on STUN to get them both working, as one kept dissconnecting the other, they both seem to work now though.
- studioeng
- Experienced
- Posts: 454
- Joined: Mon Oct 23, 2006 11:59 pm
- Location: Dorset, England
- Contact:
Well, firstly; are you using the same IP range as you were before? The IP range that you entered into the TA612V must be the same as your network IP range, otherwise it will refuse access to it. If you need to change the remote management IP range, you will need to follow my previous post, and adjust the range accordingly.jimbaggins wrote:OK, I got into the TA612v after a lot of mucking about, but after resetting my 3Com back to its original settings I can't get to the remote management.
Also it looks like my sipgate already has a sipgate number, which does not seem to correspond to mine. If this has already been opened and registered, how can I reset it?
The sipgate number you should see under VOIP status, is your SIP-ID set by sipgate, not the telephone number that you can choose. Check this by logging into sipgate and going to 'My Account' (at the bottom of the page).
- studioeng
- Experienced
- Posts: 454
- Joined: Mon Oct 23, 2006 11:59 pm
- Location: Dorset, England
- Contact:
Re: Firmware
I am currently using the open firmware V1.2_73; but I have not tried to run two of the TA612V routers behind my SWAMR. I think in your case; you will need to download the open firmware from sipgate on either one or both, so that you can adjust the listening ports on the TA612V accordingly, and then match these on your ADSL router.computercooldude.co.uk wrote:Dose anyone have the firmware version V1.2_73, for sipate, for the TA612V.
I Have 2 TA612V's sitting behind one wan router and i ended up turing on STUN to get them both working, as one kept dissconnecting the other, they both seem to work now though.
Suggestion ONLY: once you have installed the open firmware, on one of the TA612V leave the listening ports as they are, and on the second, set them to 5062 for example. With this configuration, you may need to be patient, and just fiddle with the setup.
-
- Newbie
- Posts: 5
- Joined: Thu Jan 04, 2007 1:36 pm
-
- Newbie
- Posts: 5
- Joined: Thu Jan 04, 2007 1:36 pm
-
- Novice
- Posts: 14
- Joined: Fri Jan 05, 2007 5:26 pm
- Location: Uk
- Contact:
Firmware
There may be some miss understanding.
I was Looking for a firmware version that i could download, i currently have 2 TA612V routers working quight happly,
This incase anyone else has the same problem was done by getting sipgate to update the firmware so that i could actually change settings on it, Then on one router increasing the local sip ports and the Starting RTP port by 100 to 5160 and 5104 respectivly, also enabling the stun server on the second router, with increase ports.
I am looking for the version V1.2_73 firmware, as I am getting fed up waiting 3 days for sipgate support to connect remotely to my router and upgrade them, I am getting at lease another 2, and i think that sipgate support are getting fed up of me asking them for the upgrades, as my inbox for the last 4 weeks is mainly from them, over these issues.
I also belive that it would be easier for me to do it, and then i can actully get on with using them
I was Looking for a firmware version that i could download, i currently have 2 TA612V routers working quight happly,
This incase anyone else has the same problem was done by getting sipgate to update the firmware so that i could actually change settings on it, Then on one router increasing the local sip ports and the Starting RTP port by 100 to 5160 and 5104 respectivly, also enabling the stun server on the second router, with increase ports.
I am looking for the version V1.2_73 firmware, as I am getting fed up waiting 3 days for sipgate support to connect remotely to my router and upgrade them, I am getting at lease another 2, and i think that sipgate support are getting fed up of me asking them for the upgrades, as my inbox for the last 4 weeks is mainly from them, over these issues.
I also belive that it would be easier for me to do it, and then i can actully get on with using them
-
- Novice
- Posts: 14
- Joined: Fri Jan 05, 2007 5:26 pm
- Location: Uk
- Contact:
If you dont mind, where did you buy the router from.jimbaggins wrote:Also it looks like my sipgate already has a sipgate number, which does not seem to correspond to mine. If this has already been opened and registered, how can I reset it?
If it was off somewhere such as ebay, then you may well have someone elses settings.
If you change them and them reset the router then these settings will return. unless you find a way to compleatly reset the router.
-
- Novice
- Posts: 14
- Joined: Fri Jan 05, 2007 5:26 pm
- Location: Uk
- Contact:
Staples
Dose anyone know if staples in the uk, are still running there offer on the Netgear TA612V, routers and at a reasoable price
- Shotokan101
- RouterTech Team
- Posts: 4779
- Joined: Thu Jan 26, 2006 3:17 pm
- Location: Glasgow, Scotland
- Shotokan101
- RouterTech Team
- Posts: 4779
- Joined: Thu Jan 26, 2006 3:17 pm
- Location: Glasgow, Scotland
Re: Staples
Staples online don't list ANY netgear products at the momentcomputercooldude.co.uk wrote:Dose anyone know if staples in the uk, are still running there offer on the Netgear TA612V, routers and at a reasoable price
Jim
.....I'm Sorry But I Can't Do That Dave.....
.....I'm Sorry But I Can't Do That Dave.....
-
- Novice
- Posts: 14
- Joined: Fri Jan 05, 2007 5:26 pm
- Location: Uk
- Contact:
Sipgate
The way in which the sipgate custom firware works this will not work as the username and password are writen into the firware.
You need to get the open firware. then upload these.
If anyone knows where I can get the open firmware please let me know.
As this would be usefull for Me and this case.
You need to get the open firware. then upload these.
If anyone knows where I can get the open firmware please let me know.
As this would be usefull for Me and this case.
-
- Novice
- Posts: 14
- Joined: Fri Jan 05, 2007 5:26 pm
- Location: Uk
- Contact:
Staples
Although they do not list them, they do sell netgear products.
Might just have to go and have a look in there shop
Might just have to go and have a look in there shop