Good day, I'm having problem upgrading to RouterTech v2.3 firmware from the original Solwise v63.2.5. I downloaded the ar7rd-adam2-4ports single firmware and found 3 .img files inside, which one should I use?
I've tried the ATMEL as well the standard one but it's the same, the router became bricked after upgrading. Also tried upgrading from T1-Remote v2.1 but it crashed at the end of downloading. v2.3 hangs when erasing (the progress bar keeps moving but it goes on forever).
cat /proc/ticfg/env
Code: Select all
memsize 0x00800000
flashsize 0x00200000
modetty0 38400,n,8,1,hw
modetty1 38400,n,8,1,hw
bootserport tty0
cpufrequency 150000000
sysfrequency 125000000
bootloaderVersion 0.22.03
ProductID AR7RD
HWRevision Unknown
SerialNumber none
my_ipaddress 192.168.1.1
prompt Adam2_AR7RD
firstfreeaddress 0x9401d468
req_fullrate_freq 125000000
mtd0 0x90089000,0x901f0000
mtd1 0x90010090,0x90089000
mtd2 0x90000000,0x90010000
mtd3 0x901f0000,0x90200000
autoload 1
mtd4 0x90010000,0x901f0000
DSL_FEATURE_CNTL_0 0x00000100
vcc_encaps0 0.0
vcc_encaps1 0.0
vcc_encaps2 0.0
vcc_encaps3 0.0
vcc_encaps4 0.0
vcc_encaps5 0.0
vcc_encaps6 0.0
vcc_encaps7 0.0
modulation MMODE
connection0 0x991c
usb_vid 0x0451
usb_pid 0x6060
HWA_RNDIS <censored>
HWA_HRNDIS <censored>
usb_flag 1
connection1 0
connection2 0xf803
IPA 192.168.1.1
Code: Select all
tiatm 122912 1
Code: Select all
7: 1430979 R4000 timer/counter [MIPS interrupt]
8: 0 unified secondary [hw0 (Avalanche Primary)]
15: 287 serial [hw0 (Avalanche Primary)]
23: 889812 + SAR [hw0 (Avalanche Primary)]
41: 837657 + Cpmac Driver [hw0 (Avalanche Primary)]
47: 171 + DSL [hw0 (Avalanche Primary)]
Code: Select all
ATM Driver version:[5.02.01.00]
DSL HAL version: [5.02.02.00]
DSP Datapump version: [5.02.02.00] Annex A
SAR HAL version: [01.07.2b]
PDSP Firmware version:[0.52]
Chipset ID: [7300/7300A]