The independent technical support site for all things networking!


Post a new topicPost a reply Page 1 of 2   [ 20 posts ]
Go to page 1, 2  Next
Author Message
 Post subject: help Model No: ASW800
PostPosted: Sat Jun 17, 2006 12:06 pm 
Newbie
Newbie

Joined: Sat Jun 17, 2006 11:08 am
Posts: 8
Hi! i got a problem...
I got at ADSL Router with WAN..
I Can't get the DSL modem to work..
"using proxy server on my computer, the other is connecting to the router then true my computer, other adsl modem > Net"

how to get my router to connect 2 my ISP?
Or can i tell the router to connect to my computer "using CCProxy"

Please, help my english is not very good, hope u understand..

Model No: ASW800




BusyBox on (none) login: root
Password:


BusyBox v0.61.pre (2005.05.19-05:10+0000) Built-in shell (ash
Enter 'help' for a list of built-in commands.

# cat /proc/ticfg/env
bootloaderVersion 1.2.1.5
ProductID AR7WRD
HWRevision Unknown
SerialNumber none
MODETTY0 38400,n,8,1,hw
MODETTY1 38400,n,8,1,hw
BOOTCFG m:f:"mtd1"
mtd2 0x90000000,0x90010000
mtd3 0x90010000,0x90020000
mtd1 0x90020000,0x900A0000
mtd0 0x900A0000,0x90400000
StaticBuffer 384
MAC_PORT 1
MEMSZ 0x01000000
FLASHSZ 0x00400000
CPUFREQ 150000000
SYSFREQ 125000000
PROMPT (psbl)
vcc_encaps0 0.0
vcc_encaps1 0.0
vcc_encaps2 0.0
vcc_encaps3 0.0
vcc_encaps4 0.0
vcc_encaps5 0.0
vcc_encaps6 0.0
vcc_encaps7 0.0
usb_vid 0x0451
usb_pid 0x6060
HWA_RNDIS 00:xx.xx.xx.xx
IPA 192.168.100.1
HWA_0 00:xx.xx.xx.xx
HWA_3 00:xx.xx.xx.xx
mac_ap 00:xx.xx.xx.xx
HWA_HRNDIS 00:xx.xx.xx.xx
modulation MMODE
#
Edit: mac addresses removed by thechief]


Top
 Profile  
 
 Post subject:
PostPosted: Sat Jun 17, 2006 1:05 pm 
Support Team Member
Support Team Member
User avatar

Joined: Sat Jan 28, 2006 9:02 am
Posts: 887
I note that you mention that your English is not so good, are you based in the UK? The reason I ask is so that we can check the correct VCI/VPI settings are applied to your router, if they aren't then your ADSL won't connect. We also need to check that you are using the type (PPPoA, PPPoE) and the right encapsulation (LLC or VCMux).

_________________
Image
givemespam99@yahoo.co.uk.


Top
 Profile  
 
 Post subject:
PostPosted: Sat Jun 17, 2006 1:07 pm 
Newbie
Newbie

Joined: Sat Jun 17, 2006 11:08 am
Posts: 8
I'm from sweden..
PPPoE are using here..


Top
 Profile  
 
 Post subject:
PostPosted: Sat Jun 17, 2006 4:13 pm 
Development Team Leader
Development Team Leader
User avatar

Joined: Wed Feb 01, 2006 10:22 pm
Posts: 9332
Location: England, the Centre of Africa
Have a look at the country settings here:
pages.php?page=43
Perhaps this table could be helpful.

_________________
The Chief: :afro: Be sure to read the Firmware FAQ and do a Forum Search before posting!
No support via PM. Ask all questions on the open forum.


Top
 Profile  
 
 Post subject:
PostPosted: Sat Jun 17, 2006 5:42 pm 
Support Team Member
Support Team Member
User avatar

Joined: Sat Jan 28, 2006 9:02 am
Posts: 887
So set the router to type=bridge, VPI=8 VCI=35 with LLC encapsulation according to the table should be enough.

_________________
Image
givemespam99@yahoo.co.uk.


Top
 Profile  
 
 Post subject:
PostPosted: Sat Jun 17, 2006 9:27 pm 
Newbie
Newbie

Joined: Sat Jun 17, 2006 11:08 am
Posts: 8
Tnx, but thats not correct.. :P "But tnx"
I post a image..

Image
This is how to get ADSL "DSL" work in sweden on ISP: Telia..

PEACE!! Over and out..


Attachments:
File comment: This is how to get ADSL "DSL" work in sweden on ISP: Telia..
ASW800.gif [13.36 KiB]
Downloaded 616 times
Top
 Profile  
 
 Post subject:
PostPosted: Sat Jun 17, 2006 9:38 pm 
Development Team Leader
Development Team Leader
User avatar

Joined: Wed Feb 01, 2006 10:22 pm
Posts: 9332
Location: England, the Centre of Africa
Does this mean that you have now connected successfully to your ISP?

_________________
The Chief: :afro: Be sure to read the Firmware FAQ and do a Forum Search before posting!
No support via PM. Ask all questions on the open forum.


Top
 Profile  
 
 Post subject:
PostPosted: Sat Jun 17, 2006 9:40 pm 
Newbie
Newbie

Joined: Sat Jun 17, 2006 11:08 am
Posts: 8
successfully connected to my ISP!

any ide to uppdate my firm to RouterTech Custom Firmware!?

Peace!


Top
 Profile  
 
 Post subject:
PostPosted: Sat Jun 17, 2006 9:48 pm 
Development Team Leader
Development Team Leader
User avatar

Joined: Wed Feb 01, 2006 10:22 pm
Posts: 9332
Location: England, the Centre of Africa
Excellent! We should add the Telia settings to our country table.

RouterTech's firmware should work fine with the ASW800 (which seems to be exactly the same as the original SWAMR-54108). However, as always, caution is advised. Don't try it unless you know what you are doing - and unless you have read and understood clearly the (online) instructions on our firmware release page.

For example, I can see from your first post that your "IPA" is set to 192.168.100.1. If you are connecting to your router with 192.168.1.1, then the IPA should be changed to 192.168.1.1 before you try any other firmware. Documentation on this is on the RouterTech firmware release page.

_________________
The Chief: :afro: Be sure to read the Firmware FAQ and do a Forum Search before posting!
No support via PM. Ask all questions on the open forum.


Top
 Profile  
 
 Post subject:
PostPosted: Sat Jun 17, 2006 10:48 pm 
Support Team Member
Support Team Member
User avatar

Joined: Sat Jan 28, 2006 9:02 am
Posts: 887
Darn it, shows the lack of PPPoE experience I have.....75% correct is a pass in most exams. You have a different style connection than we get here in the UK, hope that some of our input was useful though. Come back if you need any further help.

_________________
Image
givemespam99@yahoo.co.uk.


Top
 Profile  
 
 Post subject:
PostPosted: Sun Jun 18, 2006 12:03 am 
Support Team Leader
Support Team Leader
User avatar

Joined: Thu Jan 26, 2006 1:09 pm
Posts: 3564
I have added to the settings page (and thechief's latest amendment) to show the true 'WAN Service' and 'Type' for this kind of router, based on this thread and this:
http://www.micronet.info/faq.aspx?series_no=33#116

_________________
RouterTech Team
Image
No support via PM, please ask your questions on the forum!


Top
 Profile  
 
 Post subject:
PostPosted: Sun Jun 18, 2006 5:38 am 
Newbie
Newbie

Joined: Sat Jun 17, 2006 11:08 am
Posts: 8
eMuNiX wrote:
Darn it, shows the lack of PPPoE experience I have.....75% correct is a pass in most exams. You have a different style connection than we get here in the UK, hope that some of our input was useful though. Come back if you need any further help.


Now i'm feeling like a stupid ass, but i cant get the Port Forwarding to work..

check picture.. everything is right..

Trying to acess the page outside router, http://81.232.xxx.xx:8080/
But no... dont work..
have saved after the changes..
also have i trying to restart the router..

What i'm doing wrong?


Attachments:
1.GIF [22.97 KiB]
Downloaded 627 times
2.GIF [9.8 KiB]
Downloaded 626 times
Top
 Profile  
 
 Post subject:
PostPosted: Sun Jun 18, 2006 1:14 pm 
Moderator Team Member
Moderator Team Member
User avatar

Joined: Thu Jan 26, 2006 3:17 pm
Posts: 4726
Location: Glasgow, Scotland
Hi can you please confirm what you are trying to do ? - you are trying to access a server on your LAN using port 8080 from a PC via the internet ?

_________________
Jim

.....I'm Sorry But I Can't Do That Dave.....


Top
 Profile  
 
 Post subject:
PostPosted: Sun Jun 18, 2006 4:09 pm 
Newbie
Newbie

Joined: Sat Jun 17, 2006 11:08 am
Posts: 8
Sure!..

It's a little program named MyTunesRSS_Windows-2.0.1 "a simple way to "send" a RSS Stream".. The program have a server.. It uses Itunes Bibliotek.xml

This is perfect at home, i'm listen a lot of audiobooks and don't have to copy them 2 the psp... "2gb Memcard"..

Somthing else ihave to change, in router soiftware to get this to work..
"have tried other apps, like Ynhub, Apache"


Top
 Profile  
 
 Post subject:
PostPosted: Sun Jun 18, 2006 4:41 pm 
Moderator Team Member
Moderator Team Member
User avatar

Joined: Thu Jan 26, 2006 3:17 pm
Posts: 4726
Location: Glasgow, Scotland
hynt wrote:
Sure!..

It's a little program named MyTunesRSS_Windows-2.0.1 "a simple way to "send" a RSS Stream".. The program have a server.. It uses Itunes Bibliotek.xml

This is perfect at home, i'm listen a lot of audiobooks and don't have to copy them 2 the psp... "2gb Memcard"..

Somthing else ihave to change, in router soiftware to get this to work..
"have tried other apps, like Ynhub, Apache"


O.K. but are you trying to access someone elsesRSS server feed from your PC over the internet or is it on your own LAN the RSS server ?

_________________
Jim

.....I'm Sorry But I Can't Do That Dave.....


Top
 Profile  
 
Display posts from previous:  Sort by  
Post a new topicPost a reply Page 1 of 2   [ 20 posts ]
Go to page 1, 2  Next


Who is online

Users browsing this forum: Google [Bot] and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB & WordPress     Hosted by Kieran O'Shea     Site Code © 2009 Kieran O'Shea     All site contents © 2009 RouterTech - All rights reserved     Valid HTML     Valid CSS     Graphics by Neo