CPU revision is: 00018448 Primary instruction cache 16kb, linesize 16 bytes (4 ways) Primary data cache 16kb, linesize 16 bytes (4 ways) Number of TLB entries 16. Linux version 2.4.17_mvl21-malta-mips_fp_le (developers at RouterTech dot Org) #1 Mon May 2 01:29:22 BST 2011 Determined physical RAM map: memory: 14000000 @ 00000000 (reserved) memory: 00020000 @ 14000000 (ROM data) memory: 00fe0000 @ 14020000 (usable) On node 0 totalpages: 4096 zone(0): 4096 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: calculating r4koff... 000b71b0(750000) CPU frequency 150.00 MHz Calibrating delay loop... 149.91 BogoMIPS Freeing Adam2 reserved memory [0x14001000,0x0001f000] Memory: 14112k/16384k available (1714k kernel code, 2272k reserved, 111k data, 64k init) Dentry-cache hash table entries: 2048 (order: 2, 16384 bytes) Inode-cache hash table entries: 1024 (order: 1, 8192 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 4096 (order: 2, 16384 bytes) Checking for 'wait' instruction... unavailable. POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 TI Optimizations: Allocating TI-Cached Memory Pool. Warning: Number of buffers is not configured.Setting default to 128 Using 128 Buffers for TI-Cached Memory Pool. DEBUG: Using Hybrid Mode. NSP Optimizations: Succesfully allocated TI-Cached Memory Pool. Initializing RT netlink socket Starting kswapd Disabling the Out Of Memory Killer devfs: v1.7 (20011216) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 squashfs: version 3.1 (2006/08/19) Phillip Lougher, lzma support by McMCC pty: 32 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with no serial options enabled ttyS00 at 0xa8610e00 (irq = 15) is a 16550A ttyS01 at 0xa8610f00 (irq = 16) is a 16550A Vlynq CONFIG_MIPS_AVALANCHE_VLYNQ_PORTS=2 Vlynq Device vlynq0 registered with minor no 63 as misc device. Result=0 Vlynq instance:0 Link UP Vlynq Device vlynq1 registered with minor no 62 as misc device. Result=0 VLYNQ 1 : init failed block: 64 slots per queue, batch=16 DEBUG: Initializing the voice port management module. DEBUG: Initialization of the voice port management module successful.. loop: loaded (max 8 devices) Cpmac driver is allocating buffer memory at init time. Cpmac driver Enable TX complete interrupt Default Asymmetric MTU for eth0 1500 Default Asymmetric MTU for eth1 1500 Default Asymmetric MTU for eth2 1500 Default Asymmetric MTU for eth3 1500 PPP generic driver version 2.4.1 PPP Deflate Compression module registered avalanche flash device: 0x400000 at 0x10000000. Amd/Fujitsu Extended Query Table v1.1 at 0x0040 Flash_type=AMD; Manufacturer=FUJITSU (AMD-compat). Manufacturer_ID=0x0004; Chip_ID=0x00F9; Chip_Size=0x400000; Erase_Regions=0x0002 The Chief's FLASH extensions (www.RouterTech.Org): code loaded. number of CFI chips: 1 Looking for mtd device :mtd0: Found a mtd0 image (0xa0000), with size (0x360000). Creating 1 MTD partitions on "Physically mapped flash:0": 0x000a0000-0x00400000 : "mtd0" Looking for mtd device :mtd1: Found a mtd1 image (0x20090), with size (0x7ff70). Creating 1 MTD partitions on "Physically mapped flash:0": 0x00020090-0x000a0000 : "mtd1" mtd: partition "mtd1" doesn't start on an erase block boundary -- force read-only Looking for mtd device :mtd2: Found a mtd2 image (0x0), with size (0x10000). Creating 1 MTD partitions on "Physically mapped flash:0": 0x00000000-0x00010000 : "mtd2" Looking for mtd device :mtd3: Found a mtd3 image (0x10000), with size (0x10000). Creating 1 MTD partitions on "Physically mapped flash:0": 0x00010000-0x00020000 : "mtd3" Looking for mtd device :mtd4: Found a mtd4 image (0x20000), with size (0x3e0000). Creating 1 MTD partitions on "Physically mapped flash:0": 0x00020000-0x00400000 : "mtd4" Looking for mtd device :mtd5: NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 1024 bind 1024) GRE over IPv4 tunneling driver Default Asymmetric MTU for gre0 1476 Linux IP multicast router 0.06 plus PIM-SM ip_conntrack version 2.1 (1021 buckets, 8168 max) - 384 bytes per conntrack ip_conntrack_pptp.c:init: ip_conntrack_pptp.c: registering helper ip_conntrack_pptp version 1.9 loaded ip_nat_pptp.c:init: ip_nat_pptp.c: registering NAT helper ip_nat_pptp version 1.5 loaded ip_tables: (C) 2000-2002 Netfilter core team ipt_account 0.1.6 : Piotr Gasidło , http://www.barbara.eu.org/~quaker/ipt_account/ netfilter PSD loaded - (c) astaro AG ipt_recent v0.3.1: Stephen Frost . http://snowman.net/projects/ipt_recent/ NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NET4: Ethernet Bridge 008 for NET4.0 Initializing the WAN Bridge. VFS: Mounted root (squashfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 64k freed Algorithmics/MIPS FPU Emulator v1.5 registered device TI Avalanche SAR Sangam detected DSP binary filesize = 399062 bytes tn7dsl_set_modulation : Setting mode to 0x1 Texas Instruments ATM driver: version:[7.05.01.00] tn7dsl_set_modulation : Setting mode to 0x1 Default Asymmetric MTU for br0 1500 Default Asymmetric MTU for br1 1500 Default Asymmetric MTU for br2 1500 device eth0 entered promiscuous mode br0: port 1(eth0) entering learning state device eth2 entered promiscuous mode br0: port 2(eth2) entering learning state Default Asymmetric MTU for wlan0 1500 br0: port 1(eth0) entering forwarding state br0: topology change detected, propagating br0: port 2(eth2) entering forwarding state br0: topology change detected, propagating 397: 802.11d is 397: ** Enabled ** 397: 802.11h is 397: disabled. 397: Country String is: 'US ' 397: Configuration succeeded !!! 397: WLAN driver database is up Resetting the remote device. Un-resetting the remote device. About to re-init the VLYNQ. Re-initialized the VLYNQ. 398: AcxRegAddr = 0xA4040000, AcxMemAddr = 0xA4000000 398: whal_acxProcInitiate: found DEVICE_VENDOR ID = 0x9066104c 398: whal_acxProcInitiate: Cpu halt -> download code 399: whal_acxProcLoadFwImage: 0xa4000000, 0x0 399: whal_acxProcLoadFwImage() -- Loading FW image399: Compiled for RADIA (bg) radio 399: whal_acxProcLoadFwImage: 1, pBuf=0xc00b0000, len=0x15564. Extra pBuf=0x0, len=0x3 399: whal_acxProcLoadFwImage: 2, pBuf=0xc00b0000, len=0x15564. Extra pBuf=0x0, len=0x3 399: whal_acxProcLoadFwImage: 3, pBuf=0xc00b0000, len=0x15564, DataLen=0x1555c 400: whal_acxProcLoadFwImage: 4, pBuf=0xc00b0000, len=0x15564 400: whal_acxProcLoadFwImage: Checksum, calc=0x71e76f, file=0x71e76f 403: whal_acxProcInitiate: run 403: whal_acxProcWaitInitComplete: 409: whal_acxMboxInit: pCmdMbox=0xa401dd00, pInfoMbox=0xa401de88 409: ---------------------------------------------------------------- 409: ACX Firmaware Version = Rev 1.6.0.24 410: ---------------------------------------------------------------- 410: whal_acxProcConfigure: templates (beacon, probe response, tim) for [0] Network 410: whal_acxProcConfigure: Host Queue is in 0x9477E020 410: TxQueue[0] NumDesc = 32 410: TxQueue[0] Priority = 0 410: TxQueue[1] NumDesc = 32 410: TxQueue[1] Priority = 129 411: whal_acxConfigMemory() -- HostRxDescriptorsAddr = 1477e020 411: RxQueue NumDesc = 32 411: RxQueue Priority = 0 411: RxQueue type = 7 411: 411: whal_acxProcConfigure: WEP cache 411: whal_acxProcConfigure: read queue heads 412: whal_acxConfigRead_QueueHead() - 412: RxMemBlkQ - 00016960 412: RxQueueHead - 00013f54 412: TxMemBlkQ - 0001b360 412: TxMemBlkQ[0]- 000145d4 412: TxMemBlkQ[1]- 00014c54 412: 412: whal_acxProcConfigure: configure RxQueue/TxQueue objects 412: whal_txQueue_Init: [Qid=0] HwBaseAddr=0xa40145d4, NumDesc=32 412: Write EDCF-IE: TxQueue = 0, trafficType 1 AIFSN = 2, CWmin = 15, CWmax = 1023 413: MSDULifetime 512 ,rxTimeout 0 ,ackPolicy 0, shortRetryLimit 7 413: longRetryLimit 2 , retryPremption 0 , txopLimit 3000 , txopContinuation 1 413: whal_txQueue_Init: [Qid=1] HwBaseAddr=0xa4014c54, NumDesc=32 414: whal_ParamsPrintMemMap: 414: Code (0x00000000, 0x0001250c) Wep (0x0001283c, 0x0001294c) Sta (0x0001294c, 0x00013f34) Tmpl (0x00012524, 0x000125d9) Queue (0x00013f54, 0x000152d4) Pool (0x00016960, 0x0001c760) 416: whal_apiConfig: beaconInterval = 200 WATCH_DOG_TIMER_VAL = 520 wd_beacon_limiter = 1 416: WLAN HAL layer is up 416: BssBridge is up 416: Mgmt is up 416: Rx is up 416: Tx is up 416: MemMngr is up 416: main state machine is up 437: WDRV_MAINSM: WLAN Driver initialized successfully 437: WDRV_4X: 4x Enabled437: WDRV_4X: Concatenation Enabled 437: WDRV_4X: Ack Emulation Disabled 437: whal_apiStartBss: Enable Tx, Rx and Start the Bss 437: ---------------------------------------------------------------- 437: ---------------------------------------------------------------- 437: START BSS, SSID=casita, BSSID=00-50-F1-12-12-10 438: ---------------------------------------------------------------- 438: ---------------------------------------------------------------- 438: AP Power Level = 1 438: Regulatory Domain = ETSI 438: Net[0] : Channel=11 438: ---------------------------------------------------------------- 439: FW Watchdog is Enabled dda: wlan0 in initializing Succeeded wireless extensions: ret = 0 DSL in Sync device eth3 entered promiscuous mode br0: port 3(eth3) entering learning state wlan0 device is activated device eth1 entered promiscuous mode br1: port 1(eth1) entering learning state set bridge igmp snooping On set bridge igmp snooping On br0: port 3(eth3) entering forwarding state br0: topology change detected, propagating Default Asymmetric MTU for rshaper 0 set bridge igmp snooping On br1: port 1(eth1) entering forwarding state br1: topology change detected, propagating device wlan0 entered promiscuous mode br0: port 4(wlan0) entering learning state Default Asymmetric MTU for nas0 1500 atm_connect (TX: cl 1,bw 0-0,sdu 1524; RX: cl 1,bw 0-0,sdu 1524,AAL 5) DEBUG: Registering protocol inspector: 0x94172aac for VCC:0x9471a000 br0: port 4(wlan0) entering forwarding state br0: topology change detected, propagating Default Asymmetric MTU for ppp0 1500 device br0 entered promiscuous mode device br1 entered promiscuous mode MASQUERADE: Route sent us somewhere else. MASQUERADE: Route sent us somewhere else. MASQUERADE: Route sent us somewhere else. MASQUERADE: Route sent us somewhere else. MASQUERADE: Route sent us somewhere else. NET: 4 messages suppressed. MASQUERADE: Route sent us somewhere else. NET: 1 messages suppressed. MASQUERADE: Route sent us somewhere else. NET: 1 messages suppressed. MASQUERADE: Route sent us somewhere else. NET: 3 messages suppressed. MASQUERADE: Route sent us somewhere else. MASQUERADE: Route sent us somewhere else. MASQUERADE: Route sent us somewhere else. MASQUERADE: Route sent us somewhere else. MASQUERADE: Route sent us somewhere else. MASQUERADE: Route sent us somewhere else. MASQUERADE: Route sent us somewhere else. MASQUERADE: Route sent us somewhere else. NET: 2 messages suppressed. MASQUERADE: Route sent us somewhere else. NET: 1 messages suppressed. MASQUERADE: Route sent us somewhere else. MASQUERADE: Route sent us somewhere else.