One possible problem. torrent in should have 10.10.1.0 as DESTINATION IP torrent out should have 10.10.1.0 as SOURCE IP
in both cases only destination ports are defined ports (4217-5397), source ports are always random available ports.
0x000af000-0x00400000 : "mtd0" mtd: partition "mtd0" doesn't start on an erase block boundary -- force read-only Avalanche: linking partition mtd0: mtd0 -> ../../mtdblock/0 Is normal mtd0 and mtd1 are both read only file systems ! the only 'problem' would be when changing firmware would need to use...
Wireless card is NOT active. NVS_TFTP_LOAD 1 could be that the EEPROM values are out of sequence WLAN_EEPROM14 WLAN_EEPROM3 WLAN_EEPROM4 WLAN_EEPROM5 WLAN_EEPROM6 WLAN_EEPROM7 WLAN_EEPROM8 WLAN_EEPROM9 WLAN_EEPROM10 WLAN_EEPROM11 WLAN_EEPROM12 WLAN_EEPROM13 WLAN_EEPROM0 WLAN_EEPROM1 WLAN_EEPROM2 Set...
After the router was setup with the MAC assigned IP did you try repairing the connection or (via commend prompt) try an ipconfig /release ipconfig / renew ? Don't know but think the way DHCP works is that if the PC had an IP ( PC remembers it even after a reboot ) then as long as the IP is available...
Both routers need to support WDS (Wireless Distribution System) do you know if the router do support it?
Is there anywhere a manual can be downloaded, even though not familiar with router someone may be able to have an educated guess at how it would need to be setup.
You really need to try and get the "WirelessEnvBuilder" working. The MAC isn't that important to get wireless working BUT the wireless cards CHIP ID is vital and HAS to match the wireless card. The chip ID is not so easy to find, it is not printed anywhere. It can be found using the "WirelessEnvBuil...
Jul 23 01:00:24 | MRU: 1500 Jul 23 01:00:28 | PPPoE Connection Successfully Established Jul 23 01:00:28 | primary DNS address 218.248.240.181 Jul 23 06:30:28 | secondary DNS address 218.248.240.23 There's a 5 minute pause there - not good! The MRU for pppoe should not be 1500, suggest you drop this...