Hi The Chief, Many thanks for your help. 1 - If I do understand, it's impossible to use FTP protocol with RT firmware on 2mb flash routers ? Is there another way to transfer a bootloader binary to the router's /var/ directory (USB for example) ? 2 - The new PSP bootloader binary for my router shoul...

Hi The Chief, Many thanks for your help. If I do understand, it's impossible to use FTP protocol with RT firmware on 2mb flash routers ? Is there another way to transfer a bootloader binary to the router's /var/ directory (USB for example) ? The new PSP bootloader binary for my router should be "psb...

Be careful. The router has an Intel(compatible) flash chip, and those kinds of flash chips have proved very troublesome. If you have functional JTAG and a backup of your current bootloader, then you can go ahead and try changing it. If not, then don't attempt to change the bootloader. The risk of t...

An incomplete diagnostic is not of much use (especially one in which the system log has been cleared), but, from what I can see, it updated at 9.43am - and it should always update every time the WAN IP address changes. If it doesn't update on every external IP change, then you will need to find a w...

Post the system diagnostics. Hi The Chief, I confirm DDNS don't update everytime. For example, it didn't update today. I tried to get system diagnostic, but this made the modem/router to hang ... Here is the incomplete result : Deleted on request Regards NB : If there is anything confidential in th...

Hi,

I'd like to replace Adam2 bootloader by PSPBoot on my AZTECH DSL600EU modem.

Does someone already managed to do it ?

Regards

You put in your ddns domain name (e.g., skybub.dyndns.org) Hi The Chief, thanks for this information. The setting I made was initially correct, I put it back, rebooted the modem and everything appears OK now. So I wonder if the RT firmware do update the IP address with dyndns when the ISP change it...

skybub wrote: What should I set in "domain name" (I have put xxxx.dyndns.org) ?
Regards

-> Initially, I put my host name in domain name

-> Should I put www.dyndns.org ?

Regards

In the DDNS Status I get this :

Connection: (Name of the connection)
DDNS Server: DynDNS
Status: Error
Error Description: No Response

Hi, I don't manage to use DDNS fonctionnality with "RouterTech_3.6.0D_20120130_2.97 (Adam2-lite-dsp70; 20120130222141)" firmware Can someone explain how to set it up correctly ? What should I set in "domain name" (I have put xxxx.dyndns.org) ? Where can I enable a log to see what's wrong (and what l...

OK, I've found the solution : there was no problem (even if you leave DHCP server on) ! Actually, when you enter external IP of your modem/router on your browser, the modem doesn't send you on Internet, it stays in local mode : so, it display his configuration page instead of the one of the NETGEAR....

Hi,

I've been told that the DG834v2 has got the same hardware than the DG834v1.

Anybody has tried to install RT firmware on the v1 ?

Hi, I've got a modem router (an AZTECH DSL600EU) running RouterTech firmware which I want to forward everything to a NETGEAR router. The AZTECH (running Routertech firmware) has been plugged onto the WAN port of the NETGEAR gigabit router and I tried to configure it like this (after a 30/30/30 reset...