Search found 564 matches

by biro
Thu Aug 25, 2011 11:09 am
Forum: General
Topic: serial console cable
Replies: 3
Views: 5265

Re: serial console cable

Never connect any serial port (PC or USB) direct to the router as the voltage levels are different.
Standard RS232 serial uses voltages upto +/- 12V.
The router serial port runs at 3.3v.
by biro
Sat Mar 06, 2010 12:41 am
Forum: Firmware
Topic: Bug in Firmwares
Replies: 7
Views: 6461

Re: Bug in Firmwares

Is the linux box acting as a router ie IPCop / smoothwall etc. ? If so then the AR7WRD should forward the required ports to linux box "WAN" IP 192.168.128.100 and then the linux box should forward the ports to the correct LAN IP's. I am assuming that the linux box is the only thing connected to the ...
by biro
Mon Nov 09, 2009 3:41 am
Forum: Firmware
Topic: Scheduling IP blocking
Replies: 30
Views: 20697

Re: Scheduling IP blocking

Have you changed the DHCP range on the router?
if 192.168.1.3 isn't within the routers DHCP range then it won't issue it even when set as a static IP.
by biro
Mon Sep 07, 2009 2:32 am
Forum: Routers
Topic: SWART2/GWART2 Help! (Port Forwarding Setup Issue)
Replies: 2
Views: 3467

Re: SWART2/GWART2 Help! (Port Forwarding Setup Issue)

To forward a range of ports "Port Map" should be the same as "Port Start"

eg
Port start: 1
Port end: 10
Port Map: 1

would forward WAN port 1 to LAN port 1, port 2 to 2 ........ port 10 to 10
by biro
Tue Feb 03, 2009 4:51 pm
Forum: Firmware
Topic: cron at specified time
Replies: 59
Views: 37342

Does script.php actually get downloaded ?
Think you will need to specify the download dir

Code: Select all

wget -q -P/var/ http://www.mysite.com/script.php
even then may need to set permisssions and the execute the script.
by biro
Thu Jan 29, 2009 2:45 pm
Forum: Routers
Topic: Unmanaged mode/save conf - GWART254125 (2.8 firmware)
Replies: 2
Views: 3489

What is it you are trying to achieve ?
by biro
Tue Jan 27, 2009 2:43 pm
Forum: Routers
Topic: My D-Link G604T de-bricking story.
Replies: 5
Views: 11513

It is virtually impossible to have a partial flash for a number of reasons :- The flash is erased before the new firmware is loaded. It is flashed as a 'disk' image not as individual files. Even if it was a faulty chip with stuck bits the new 'file' would have to be exactly the same size and be in t...
by biro
Tue Jan 27, 2009 11:38 am
Forum: Routers
Topic: D-Link G604T gets a 100% flash but no new firmware....
Replies: 31
Views: 25251

As Monday was Australia day would have thought the OP would have been celebrating too much to worry about a router !
by biro
Tue Jan 27, 2009 11:22 am
Forum: Routers
Topic: My D-Link G604T de-bricking story.
Replies: 5
Views: 11513

Re: My D-Link G604T de-bricking story.

I was initially running the latest DLink UK firmware available, and tried to upgrade to the RouterTech firmware v2.8 via the web interface. This *appeared* to work, but after waiting and rebooting the router, I found I had the initial login screen from the RT firmware, but when I logged in, I got t...
by biro
Mon Jan 26, 2009 2:33 pm
Forum: Routers
Topic: D-Link G604T gets a 100% flash but no new firmware....
Replies: 31
Views: 25251

Did the firmware boot at all ? remove these entries ie from ftp use "quote SETENV autoload" autoload 1 autoload_timeout 7 StaticBuffer 120 LINK_TIMEOUT 15 Setup the following ENV entries IPA 192.168.1.1 vlynq_polarity low IPA_SVR 192.168.1.22 configid 0 HWA_0 00:14:2B:09:85:29 HWA_3 00:14:2B:09:85:2...
by biro
Mon Jan 26, 2009 1:39 pm
Forum: Routers
Topic: D-Link G604T gets a 100% flash but no new firmware....
Replies: 31
Views: 25251

If PCTOOL still works use THIS firmware
routertech_ar7wrd_1350a_pspboot_firmware_20081123.zip
reboot router and see if it works (wireless will be dead)
then post the current ENV from the router.
by biro
Mon Jan 26, 2009 1:01 pm
Forum: Routers
Topic: D-Link G604T gets a 100% flash but no new firmware....
Replies: 31
Views: 25251

ziggary wrote:
biro wrote:Just noticed this

Code: Select all

BOOTCFG m:f:"mtd1"
how do i fix this ?
can be done with FTP

Code: Select all

quote SETENV BOOTCFG m:f:"mtd1"
by biro
Mon Jan 26, 2009 12:59 pm
Forum: Routers
Topic: D-Link G604T gets a 100% flash but no new firmware....
Replies: 31
Views: 25251

CPUFREQ 211968000 MIPSFREQ 211968000 SYSFREQ 105984000 As for the other stuff like frequencies i don't understand that .. :( can u explain it in abit more detail bud.. Routers with these settings use a faster CPU when used on wireless routers I have only seen them when the TNETW1350A wifi chip is u...
by biro
Mon Jan 26, 2009 12:52 pm
Forum: Routers
Topic: D-Link G604T gets a 100% flash but no new firmware....
Replies: 31
Views: 25251

Just noticed this

Code: Select all

BOOTCFG m:f:"mtd1"
is missing from the ENV
without it then bootloader won't know how to 'run' the firmware.
by biro
Mon Jan 26, 2009 12:28 pm
Forum: Routers
Topic: D-Link G604T gets a 100% flash but no new firmware....
Replies: 31
Views: 25251

Router uses PSP bootloader bootloaderVersion 1.3.7.15 DarkWolf G604T v3.00B03-NZ firmware is for ADAM2 bootloader hence this entry autoload 1 Try using routertech_ar7wrd_pspboot_firmware_20081123.zip If that doesn't work then try routertech_ar7wrd_1350a_pspboot_firmware_20081123.zip as CPUFREQ 21196...