Search found 18 matches

by asmfan
Sat Aug 27, 2011 12:19 pm
Forum: Firmware
Topic: RouterTech Firmware 2.96 Discussion
Replies: 150
Views: 145198

Re: RouterTech Firmware 2.96 Discussion

found that if connection with *debug* enabled gets deleted(!) - *debug* logging keeps being active until router reset to def.
by asmfan
Fri Aug 26, 2011 9:40 pm
Forum: Routers
Topic: Way to check router's h/w & f/w
Replies: 3
Views: 4209

Re: Way to check router's h/w & f/w

Much thanks! Appeared after couple of days of testing that h/w is somehow daying (don't know what part exactly) (( Few descriptions. ioctl(s, SIOCGIFADDR, ...): No such device soft reboot often hangs router - unable to tracert/ping gateway IP *serial link not connected* messages. sometimes after ent...
by asmfan
Wed Aug 24, 2011 9:49 pm
Forum: Routers
Topic: Way to check router's h/w & f/w
Replies: 3
Views: 4209

Way to check router's h/w & f/w

Is there a way to check Router in all the possible ways? flash memory embedded OS (file consistency, permissions to be default, garbage files of prev. firmware of different types and vendors, etc.) Symptoms my D-Link DSL-524T had - it started (after some WinSCP copy to host from router /it also hung...
by asmfan
Sat Aug 06, 2011 7:58 pm
Forum: Firmware
Topic: RouterTech Firmware 2.96 Discussion
Replies: 150
Views: 145198

Re: RouterTech Firmware 2.96 Discussion

OK link level vs. transport/TCP.
Definitely your post deserves to be in FAQ.
by asmfan
Fri Aug 05, 2011 7:19 pm
Forum: Firmware
Topic: RouterTech Firmware 2.96 Discussion
Replies: 150
Views: 145198

Re: RouterTech Firmware 2.96 Discussion

The way I think it works is than the enforce will make an iptables command as shown below which you can see in FORWARD by telneting into your router and doing - iptables -L -vn TCPMSS tcp -- * ppp0 0.0.0.0/0 0.0.0.0/0 tcp flags:0x06/0x02 TCPMSS clamp to PMTU I think toggling enforce on/off will add...
by asmfan
Fri Aug 05, 2011 10:16 am
Forum: Firmware
Topic: RouterTech Firmware 2.96 Discussion
Replies: 150
Views: 145198

Re: RouterTech Firmware 2.96 Discussion

Why with every new (re-)connection ADAM2 env. fragmentation gets worse and records numbers encreased: Environment fragmentation: Fragmentation level is "2" (out of 49 records). The threshold is "30". Environment fragmentation: Fragmentation level is "3" (out of 50 records). The threshold is "30". Ho...
by asmfan
Fri Aug 05, 2011 10:09 am
Forum: Firmware
Topic: RouterTech Firmware 2.96 Discussion
Replies: 150
Views: 145198

Re: RouterTech Firmware 2.96 Discussion

I think paaja has answered your question (as far as one can understand what you're saying). If you are not satisfied with the answers, then do your own testing with the setting on and off, and you will see what difference it makes. I see that ping -f -l and with disabled "enforcement" is restricted...
by asmfan
Thu Aug 04, 2011 7:51 pm
Forum: Firmware
Topic: RouterTech Firmware 2.96 Discussion
Replies: 150
Views: 145198

Re: RouterTech Firmware 2.96 Discussion

And why do you think "enforce MRU" invalidates those MRU/MTU settings nearby? I didn't say that. Simply watch the picture. "Enforce MRU" will ensure that the value in the red box will be applied. Otherwise, it would always be 1500, no matter the settings. Hmm.. "Help" says nothing about hardcoded 1...
by asmfan
Thu Aug 04, 2011 4:47 pm
Forum: Firmware
Topic: RouterTech Firmware 2.96 Discussion
Replies: 150
Views: 145198

Re: RouterTech Firmware 2.96 Discussion

Can you explain your vision of "enforcement" any why to set it? The 1400 value is better because you can display some web pages, which are inacessible with MRU=1500. You have to enforce it because otherwise your DSLAM would connect to the router with the MRU=1500. And really - this only works on th...
by asmfan
Thu Aug 04, 2011 11:38 am
Forum: Firmware
Topic: RouterTech Firmware 2.96 Discussion
Replies: 150
Views: 145198

Re: RouterTech Firmware 2.96 Discussion

Err... I don't get your point. I wanted to say that the "enforced" value is only for the router and DSLAM communication. It has nothing to do with the MRU value set by TCP Optimizer in Windows. Can you explain your vision of "enforcement" any why to set it? And then why MRU/MTU values come nearby? ...
by asmfan
Wed Aug 03, 2011 8:04 pm
Forum: Firmware
Topic: RouterTech Firmware 2.96 Discussion
Replies: 150
Views: 145198

Re: RouterTech Firmware 2.96 Discussion

And why "enforce MRU" is set by default? The reason why PC can't handle router's (TCP/IP) downstream correctly? This value is not about the MRU in your computer. It is the value your router communicates with your assigned DSLAM. The default DSLAM MRU value is mostly 1500, so that's why it is forced...
by asmfan
Tue Aug 02, 2011 9:40 pm
Forum: Firmware
Topic: RouterTech Firmware 2.96 Discussion
Replies: 150
Views: 145198

Re: RouterTech Firmware 2.96 Discussion

Using RouterTech_3.6.0D_20110502_2.96_AR7RD-4Ports_Adam2-4mb-flash_firmware.upgrade.img
on DLink DSL-524T wireless

"System" menu has 2 buttons: Save All, Restore Defaults.
No "Restart" Button, but "Reboot router" is a separate menu item - is this the same aliased restart? not cold/warm reboot like?)
by asmfan
Tue Aug 02, 2011 11:11 am
Forum: Firmware
Topic: RouterTech Firmware 2.96 Discussion
Replies: 150
Views: 145198

Re: RouterTech Firmware 2.96 Discussion

With regard to your leds, what we have is the best that we can do. If it doesn't work for you, then you can try the "Led" command. It works, but not for Status led which should blink 1s (?) interval in according to router stable state (while router's error - it either should be black or be shining ...
by asmfan
Mon Aug 01, 2011 9:34 pm
Forum: Firmware
Topic: RouterTech Firmware 2.96 Discussion
Replies: 150
Views: 145198

Re: RouterTech Firmware 2.96 Discussion

Also noticed that web interface "System Diagnostics" doesn't show the last string: the output ends with Connection Check #1 : 1 connection(s) Connection Check #2 : 1 connection(s) connection1 while telnet's diagnostics.sh / ver as well?/ shows connection. Is it common or just for me? Also noticed th...
by asmfan
Mon Aug 01, 2011 2:17 pm
Forum: Firmware
Topic: RouterTech Firmware 2.96 Discussion
Replies: 150
Views: 145198

Re: RouterTech Firmware 2.96 Discussion

Installed RT 2.96 on DSL-524T set both via web and setenv to led.524t and status led in PPPoE keeps black( lots of threads here on status should blink and how to make it but how it indeed make it in PPPoE connection? And diag log (e.g. RUC provides) shows the same led.conf for orig. f/w and RT f/w ...