No takers, would appreciate the help

This has been added because I could not upload the files ignore all the above Hi I'm Hoping someone could lend a hand on this router I have it's an Afoundry AF-EW1200 which the manufacture no longer supports, but lucky enough OpenWrt does support it so the first firmware I flashed was 21.02.0 with ...

Sorry image not uploaded

Hi Hopping someone could lend a hand on this router I have it's an Afoundry AF-EW1200 which the manufacture have no longer supports, but lucky enough OpenWrt doe support it so the first firmware I flashed was 21.02.0 with no problems then up to 21.02.3 which still went without a hitch, then to 22.03...

To flash a router using a RS232 adapter is only the 3 pins used 2,3 & 5 earth any bringing needed on the RS232.
Many thanks

Anyone offer some advice I flashed an Afoundry router and the firmware is either corrupt or the wrong version and the result is the router powers up just sits there with the power LED on and if you plug a computer into any of the LAN ports the LED associated with the port just flashes and then goes ...

brooo... how did you get that up and running? can you post a link to it for me? Hi i take it you have a ZBT WE-826 with a open-WRT firmware, please correct me if not, if so does you're router appear dead bricked or whatever term you like to call it. If so i just configured windows with a static IP ...

thechief wrote:If the web interface will not accept the firmware, then there is no easy answer. You will have to go low-level.

Hi can you explain what you mean by low level? There must be a way or rectifying the problem I would of thought that a brick router was more serious but maybe not it seems.

Thanks for the reply
Correct I'm using the web interface is there an easy answer, or is it more complicated

I hope someone can help, I have a dual band router made by ZBV, not very expensive but did work well, the Japanese company sent me an updated firmware when I flashed it, it didn’t brick the router BUT was the incorrect for the model so I have lost the 5g band eventually after 6 weeks I managed to ge...

Good news manually configuring the computers IP address I have gained access to the router and will flash back to the firmware hopefully

Any one know a simple way of reinstalling a routers original firmware when one as broke it, or is it a bin job. I have a ZBT WE1826 which I flashed with: openwrt-ramips-mt7620-zbt-we826-squashfs-sysupgrade.bin, I have tried to register with open-WRT many many times but it would be easer to email Elv...

thechief wrote:Our firmware doesn't support that device. If OpenWrt seems to confusing, you might want to try DD-Wrt.

Many thanks much appreciated, I'll try that

Can someone please tell me if there is a firmware which will replace the stock firmware I looked on the OpenWrt Wiki compatible routers but the site is almost impossible to navigate on if you click on a recommended firmware it takes you to a directory with loads of firmware which for a novice is tot...

What WAN connection type is that? ARP only applies to Ethernet comms on local lan segment AFAIK, and devices do fall out of the arp/neighbour table after about 5 minutes. But it is just a matter of timing out on no traffic can't you just ping the ISP gateway or DNS server every few minutes as a kee...