Master, the command Led status 1 cannot work (used 605eu led file), so how to solve?

Ok thank you very much master, I will try my modem tommorrow and hope more stable than factory firmware

Sorry I'm still newbie, Full details here viewtopic.php?f=3&t=3505 quite difficult for me but I will try to, Thank's TheChief

So the proxy server must have another gateway to the internet? Am I right?

I have try all preconfigure led setting, but nor compatible adsl12mue led config = dsl and internet led correct except power led got red color 605eu led config = power dan internet led got green but dsl led off How to manual to configure out the setting? power & internet led config from 605eu settin...

How to configure Routertech modem to redirect port 80 to proxy ip port 8080 on same subnet? Is it posibble like dd-wrt do? Example: modem ip: 192.168.1.1/24 Proxy Server ip: 192.168.1.2/24 Client ip: 192.168.1.3-254/24 (web port 80 redirect to 192.168.1.2 port 8080 control by modem) This will be per...

how do you config the dsl light?

I have Aztech DSL605EU with normal power led but no dsl led and usb not function, I use default routertech config 605eu

Master, now my router can save settings, but usb and dsl led not function, how to solve?
where are you now?

Masters. after waiting you so long default Aztech firmware restored by setting manually the environment, but if I use Internet explorer to open 192.168.1.1, startup webpage is routertech, how to delete it masters? I want to restore one of my Aztech to factory firmware I want to try again flashing ti...

here my PCTOOLS log: 200 SETENV command successful 200 Port command successful. Data Connection Created. Sending STOR command to target 120 service ready in 17 seconds 150 Opening BINARY mode data connection for file transfer. C:\firmwares\firmware.img 226 Transfer complete but nothing saved on root...

Did you reset do defaults from the web interface? Answer: Yes How do you "save all" ? Answer: Yes How to clear a trashed config section of the mtd3 partition Master? I just try restore default firmware and done but nothing saved on Aztech DSL605EU and now brick again, How to solve Master? Another Az...

I can connect to Internet but dsl led is not function and I have try to delete quickconnection and save all setting, but after I restart rooter all gone.
Please help Thechief, what is the problem

I have try:
unsetenv DSL_FEATURE_CNTL_0
fixenv
reboot

but nothing fix

thechief wrote:1. Reset the firmware to defaults
2. Delete the default quickstart connection
3. Create a new PPPoE connection - do NOT touch the "sharing" option at all.
4. Go to the "System" menu, and save your settings.

How to delete quickstart connection? There is no remove button on quickstart connection

Haizzz make me headache, I can not save changed router address also, I have got stress

ROUTERTECH SYSTEM DIAGNOSTICS Client browser information Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729) Router operating system version Linux version 2.4.17_mvl21-malta-mips_fp_le (developers at Route...