Search found 18 matches

by Cat007
Fri Dec 21, 2007 12:49 pm
Forum: News
Topic: RouterTech Firmware v2.3 released
Replies: 77
Views: 136833

The short answer is "No". You could however try using the checksync feature (which checks for a WAN connection at certain intervals, and reboots the router if there is no WAN connection). Login via telnet/ssh and run this setenv checksynch.sh "1 10" /sbin/reboot This will check for a WAN connection...
by Cat007
Thu Dec 20, 2007 10:42 pm
Forum: News
Topic: RouterTech Firmware v2.3 released
Replies: 77
Views: 136833

MRU=MTU. I think you need to have your phone line checked. Is it normal parameters of the line?: Modem Status Connection Status Connected Ds Rate (Kbps) 256 Us Rate (Kbps) 128 DS Margin 31 US Margin 28 DS Line Attenuation 25 US Line Attenuation 10 Trained Modulation ADSL_G.dmt LOS Errors 0 Peak Cel...
by Cat007
Thu Dec 20, 2007 9:55 pm
Forum: News
Topic: RouterTech Firmware v2.3 released
Replies: 77
Views: 136833

hyperair wrote:Hmm, perhaps check your MTU/MRU values? They're in the PPPOE connection page.
MRU 1492... no MTU field
by Cat007
Thu Dec 20, 2007 9:49 pm
Forum: News
Topic: RouterTech Firmware v2.3 released
Replies: 77
Views: 136833

hyperair wrote:That looks as if your DSL went out of sync. Could you check your DSL status?
on the home page of web interface i found

DSL Status: Connected
DSL Speed: 128/256kbps

i guess that i have problems with pppoe ;(
by Cat007
Thu Dec 20, 2007 9:31 pm
Forum: News
Topic: RouterTech Firmware v2.3 released
Replies: 77
Views: 136833

Are you sure you don't have an internet connection? It looks connected to me. Take a look. Your DynDNS managed to update! Even with a WAN IP! Yes...of course... no connection...BTW 5 minutes age i had sam situation... ;( As per log Dec 20 15:19:12 | Terminated: Peer Not Responding to Echo Requests ...
by Cat007
Thu Dec 20, 2007 7:34 pm
Forum: News
Topic: RouterTech Firmware v2.3 released
Replies: 77
Views: 136833

Hello... one little problem again.. I back to home today and no connection on the modem... please see log... What is the problem...? Have i kick my ISP or problem in my modem? Modem do nothing... simply no conection (i dont use your advice about setenv) Jun 4 17:33:08 | Error getting mac from BootLo...
by Cat007
Thu Dec 20, 2007 1:45 pm
Forum: News
Topic: RouterTech Firmware v2.3 released
Replies: 77
Views: 136833

The short answer is "No". You could however try using the checksync feature (which checks for a WAN connection at certain intervals, and reboots the router if there is no WAN connection). Login via telnet/ssh and run this setenv checksynch.sh "1 10" /sbin/reboot This will check for a WAN connection...
by Cat007
Thu Dec 20, 2007 1:44 pm
Forum: News
Topic: RouterTech Firmware v2.3 released
Replies: 77
Views: 136833

hyperair wrote:I'll try coming up with a shell script, but I have to learn some stuff first. >< I forgot how to code shell scripts.
thanks in advance...
by Cat007
Thu Dec 20, 2007 1:20 pm
Forum: News
Topic: RouterTech Firmware v2.3 released
Replies: 77
Views: 136833

There is a possibility that you could use the RT_CMD_# boot environment variables to add something to the cron at the beginning, and have it restart pppd or something. ....isn't that what Chief's checksynch script does ? :? No. The checksync script doesn't restart just pppd. It restarts the entire ...
by Cat007
Thu Dec 20, 2007 12:26 pm
Forum: News
Topic: RouterTech Firmware v2.3 released
Replies: 77
Views: 136833

The short answer is "No". You could however try using the checksync feature (which checks for a WAN connection at certain intervals, and reboots the router if there is no WAN connection). Login via telnet/ssh and run this setenv checksynch.sh "1 10" /sbin/reboot This will check for a WAN connection...
by Cat007
Thu Dec 20, 2007 7:04 am
Forum: News
Topic: RouterTech Firmware v2.3 released
Replies: 77
Views: 136833

New question... Situation. My ISP has one special bug... After cold reboot (power off and on on the G604T) my modem try make pppoe connection but ISP answer - access denied... The reason is that ISP dont close previouse session and dont grant access to my modem. If i will wait for 5-10 minutes pppoe...
by Cat007
Tue Dec 18, 2007 12:21 pm
Forum: News
Topic: RouterTech Firmware v2.3 released
Replies: 77
Views: 136833

mikecz wrote:You're running RT firmware for AR7WRD on an AR7RD?
Your ADAM2 prompt says RD, your firmware says WRD.
i dont think about it... i will check...

If i use wrong RT firmware for G604T...what exactly i have to use? Mod from DarkWolf?
by Cat007
Sat Dec 15, 2007 5:38 am
Forum: News
Topic: RouterTech Firmware v2.3 released
Replies: 77
Views: 136833

I can't see anything obviously wrong in the diagnostics, so I am not sure what the problem is. You might want to take a look at DarkWolf's mod of RT v2.3. It is specifically modded for the g604t, and also has the "tiupgrade" utility, which seems far better for the g604t firmware upgrade than the pc...
by Cat007
Fri Dec 14, 2007 6:45 pm
Forum: News
Topic: RouterTech Firmware v2.3 released
Replies: 77
Views: 136833

I've had good luck with DarkWolf's variant of the routertech software on a dsl-g604t. It may simply be that his version of the upload (ie. pctool or config parameters) works better on these routers. Mine killed itself on the first upload and then I used the dead router recovery mode and that flashe...
by Cat007
Fri Dec 14, 2007 6:38 pm
Forum: News
Topic: RouterTech Firmware v2.3 released
Replies: 77
Views: 136833

Can you post a copy of the system diagnostics (after removing all personal/sensitive information)? Please find enclosed system diagnostics from my router : (i was reload router with 2.3 release and only after reloading i can read diagnostics data) ROUTERTECH SYSTEM DIAGNOSTICS Operating system vers...