Well, the situation is now degraded with the Bewan firmware too... :shock: (So I think you can remove this post from here or rename it...) To solve the problem (not 100% confirmed but seems OK now...) : - I remove the intercom for a test => nothing has change... - Keeping the intercom removed, I buy...

mstombs wrote:What atm/dsp drivers does the stock Bewan use?

Not sure : it's 6.0 ? Where can I find it ?

Thanks for the explanation, yes I think it's due to noise on the line, there's an old intercom on it (we say "interphone" in french). Someday I'll try to understand how it's done and fix it... Bewan doesn't respect GPL license, so no sourcecode available... I'll try to find the Bewan "dsp version" w...

My test shows that it happens sometimes with the Bewan firmware too, but less often.

Hi ! I've a problem with RT 2.6/2.7/2.8 firmwares that I've not with the official Bewan 700G (16Mb) RoHS firmware ( 3.7.0a w1.0.6 : http://www.bewan.fr/assistance.php?page=assistance&parm1=telechargement&parm2=&id_produit=95 ). With the Routertech firmwares, at a certain point in time (maybe after l...

Thank, you again for the usefull links ! Setting IPA gives me the TNETW ID after reboot. Thanks to the awesome Wireless Enviroment Builder tool now Wifi is back again. My original firmware was WPA/PSK max and now I run WPA2 8) NOTE : I'm surprise because the WEB tool gives different result for some ...

Oops it's exactly the same as led.sar600.conf

Everything is perfect

OK.

Sometimes a firmware is done such that it is not possible to upgrade it from the web interface. In that case you will need to use the PCTool. With the Bewan 700G RoHS (1350 Wifi chip), I try to use Web update and RRT with no chance. Then I try PCTool 2.0 and it produces a brick, but hopefully the b...

BTW, the official 1.01.06 is available (+ changelog) Linksys is not the master of firmware :roll: : "My WAG200G is working fine with good speed, however when I use Flashget (Download manager) with more than one part the WAG200G disconnects the internet immediately. and reconnect after 15 seconds an...

No news for me, I think my brick will stay so, maybe I will give it to somebody in Paris.

BTW, the official 1.01.06 is available (+ changelog)

You have a router with the TNETW1350A wifi chip. The 1350A gets reported as 1150 in the AR7 interrupt tables. Your wifi chip is NOT compatible with the RT v2.3 firmware, but might be compatible with the RT v2.4 firmware for the TNETW1350A chip, if all the other elements are also correct. The first ...

Hi guys, My WWW credentials don't work when I try and telnet either... So i suppose my main question is.. Can i do this??! Do not use admin/password but root/password. You don't need Woytekm firmware to get telnet access, just go there : http://192.168.1.1/setup.cgi?todo=debug It launches a utelnet...

Indeed ! Thanks

Found this too : 12 pins headers/14 pins headers
http://wiki.openwrt.org/OpenWrtDocs/Cus ... JTAG_Cable
The only difference is Vcc.