There's an overclock Oleg or JacktheVindicator mod of an old adam2 bootloader around - probably based on Linksys WAG54GV2 sources. A risky operation - need to be prepared to use JTAG to recover if it doesn't work. Bootloaders are hardware specific, need the right one for your flash, ram and switch ...

The LAN Client IP settings by defining each and every client and setting rules for each one of them however does not fancy my appreciation. Its a rather crude and troublesome way of settings VPN access for a number of LAN client which may get varying IP addresses depending on the number of how many...

I think you may like to update this - that firmware file name is not correct! Sorry I was in a hurry and looked in a wrong folder. The correct firmware name is : RouterTech_3.6.0D_20080723_2.60_AR7RD-1Port_psbl_firmware.upgrade.img It is the version for Pspboot bootloader; the version I quoted in m...

What procedure did you use to download the FW? Did you use pc-tool ? Did you use a script with it ? I'm a bit confused with the MTDs For first thing it's better to change the IP address of the bootloader, in the case the 320T should not boot properly. (the IP address is the value of IPA in the env ...

I heard of people with my modem that have routertech FW on with no problem. ] I have a DSL-320T with RT 2.60 perfectly working; the version to download is: routertech-ar7rd-pspboot-1port-firmware-20080723.zip The only problem : to have all the LEDs working I had to set 'setenv led_conf led.g300t' a...

You are very brave indeed. Thanks! Do you have a serial console? Not yet. I wanted to build a serial cable after bricking a Dlink DSL-300T; but after some wears and tears I was able to resurrect it without a serial console. Now for me is mandatory to build one, also because I nearly succeeded in in...

I'm surprised a netgear firmware image includes mtd2 - is that a typo? I too was surprised; but if you download the standard firmware from NETGEAR site you'll get an .img file of nearly 4MB and in the first 128k there's Adam2 (it's equal to mtd2 block backed up from the router). How did you make th...

I too tried to install RT FW on a DG834 v2. After some investigations I discovered the content of the MTD blocks: mtd0 0x900d0000,0x903e0000 fs mtd1 0x90020000,0x900d0000 krnl mtd2 0x90000000,0x90020000 Adam2 (128k) mtd3 0x903e0000,0x903f0000 config mtd4 0x903f0000,0x90400000 env The main difference...