How could I determine why it is unable to restore PPPoE session?
Sorry for my poor English and insistence.
Search found 14 matches
- Mon Mar 30, 2009 11:42 pm
- Forum: Routers
- Topic: DLINK g604t (v2.8) goes down from time to time
- Replies: 11
- Views: 11750
- Mon Mar 30, 2009 11:39 am
- Forum: Routers
- Topic: DLINK g604t (v2.8) goes down from time to time
- Replies: 11
- Views: 11750
I see. I can't get why it can't restore session. My ISP close session every 24h and my DLINK with original firmware was able to restore it immediately after it went down. DSL connection is alive. Why can't it restore ppp connection under RT? Is there any helpful log to determine the issue. Probably ...
- Sun Mar 29, 2009 11:14 pm
- Forum: Routers
- Topic: DLINK g604t (v2.8) goes down from time to time
- Replies: 11
- Views: 11750
- Sun Mar 15, 2009 3:14 pm
- Forum: Routers
- Topic: DLINK g604t (v2.8) goes down from time to time
- Replies: 11
- Views: 11750
thechief, thanks for response. First of all I can't get how to make my router to perform Check-sync lets say every 30 seconds. Command line option support only hours. So it checks connections status once a hour. Less values then 1 truncated to 1. The problem is that once a day (sometimes even freque...
- Tue Feb 10, 2009 11:28 am
- Forum: Routers
- Topic: DLINK g604t (v2.8) goes down from time to time
- Replies: 11
- Views: 11750
ADSL line is stable, but PPPoE session is broken once a day. I tried to wait some time to get modem a chance to restore the line itself. But it remains not connected. There is no button to restore PPPoE session, so I have to restart the modem. Will it restore session itself? How to decrease auto-res...
- Wed Feb 04, 2009 5:04 pm
- Forum: Routers
- Topic: DLINK g604t (v2.8) goes down from time to time
- Replies: 11
- Views: 11750
DLINK g604t (v2.8) goes down from time to time
A few times a day i have lost connection on my modem. I want to debug what happens. Could someone help me?
In Connection status there is only not that it is in "not connected" status.
I want to know why it happens and how to fix it.
BTW: why it does not restore connection on failure?
In Connection status there is only not that it is in "not connected" status.
I want to know why it happens and how to fix it.
BTW: why it does not restore connection on failure?
- Mon Jan 26, 2009 8:59 am
- Forum: Software
- Topic: RouterTech RSS ticker
- Replies: 4
- Views: 27626
- Fri Nov 14, 2008 1:16 am
- Forum: Firmware
- Topic: RT 2.7 on G604T, a few questions
- Replies: 1
- Views: 2758
RT 2.7 on G604T, a few questions
I have just updated from RT 2.6 to RT 2.7, everything gone perfect. It works. But I have a few questions... 1) How could I change the order of ceonnections in the list? I know that does not mean anything... But the first connections is a default for all settings where you have to chhose one. And I h...
- Sat Sep 27, 2008 6:43 pm
- Forum: Firmware
- Topic: Can create LAN Lcient
- Replies: 1
- Views: 2634
Can create LAN Lcient
I'm trying to add a LAN client to enable Porf Forwarding (v2.6 on DLINK G604T) and I get an error:
ERROR: Error found on page
I'm trying to add it with these params:
IP Address: 192.168.1.3
MAC: XX-XX-XX-XX-XX-XX
Hostname: *blank*
What could be the problem?
ERROR: Error found on page
I'm trying to add it with these params:
IP Address: 192.168.1.3
MAC: XX-XX-XX-XX-XX-XX
Hostname: *blank*
What could be the problem?
- Sun Aug 24, 2008 4:37 pm
- Forum: Firmware
- Topic: Upgrading Dlink G604T
- Replies: 15
- Views: 12072
- Sun Aug 24, 2008 3:22 pm
- Forum: Firmware
- Topic: Upgrading Dlink G604T
- Replies: 15
- Views: 12072
- Sun Aug 24, 2008 2:08 pm
- Forum: Firmware
- Topic: Upgrading Dlink G604T
- Replies: 15
- Views: 12072
OK, 192.168.1.199 was a built in value for my original firmaware. I have set it to 192.168.1.1... But, I've got an error while flashing a firmware. I use tiupgrade tool to flash it in "corruption mode" but it fails with Script error: EAccessViolation... I can't get to web interface wnymore, even whe...
- Sat Aug 23, 2008 9:34 pm
- Forum: Firmware
- Topic: Upgrading Dlink G604T
- Replies: 15
- Views: 12072
Currently my_ipadress is 192.168.1.199. Why? =============== /proc/ticfg/env memsize 0x01000000 flashsize 0x00400000 modetty0 38400,n,8,1,hw modetty1 38400,n,8,1,hw bootserport tty0 cpufrequency 150000000 sysfrequency 125000000 bootloaderVersion 0.22.02 ProductID AR7WRD HWRevision Unknown SerialNumb...
- Fri Aug 22, 2008 11:02 pm
- Forum: Firmware
- Topic: Upgrading Dlink G604T
- Replies: 15
- Views: 12072
Upgrading Dlink G604T
I'm going to update my D-Link G604T. I'm almost ready, already prepared update utilty, configs and so on. But.... How could I make sure that it will be OK. Here is RUC LOG ======== Router Upgrade Check 1.2.9 23/08/2008 00:26:47 Router IP: 192.168.1.1 CLI is needed Description: Dlink G604T Board type...