Search found 6 matches

by adamski
Sun May 14, 2006 6:54 pm
Forum: Firmware
Topic: SWAMR-54108 turned into doorstop
Replies: 44
Views: 85123

No that pc was connected via 2 swtiches before it hit the router. I have a 16 port switch coming strqigh out the router one of the ports goes to another 8 port switch in my play room. This is where it was connected. This time round, i used a laptop connected to my other wireless a/p and hard wired a...
by adamski
Sun May 14, 2006 4:23 pm
Forum: Firmware
Topic: SWAMR-54108 turned into doorstop
Replies: 44
Views: 85123

The factory reset seemed to do the trick. I held the power button down whilst switching on. Lightes flashed a number of times. After about a minute, and another power cycle, it all kicked in. Upgrading the firmware worked as well this time, so now I'm on the latest RouterTech version. The only thing...
by adamski
Sun May 14, 2006 3:02 pm
Forum: Firmware
Topic: SWAMR-54108 turned into doorstop
Replies: 44
Views: 85123

I'm in!!!!

Now I've got to find something else to prop open the door

Many thanks to everyone for all your help!

Now to try that original firmware upgade again........
by adamski
Sun May 14, 2006 2:36 pm
Forum: Firmware
Topic: SWAMR-54108 turned into doorstop
Replies: 44
Views: 85123

getting better...

firstly, to answer your questions. 1. Using version 2.1 downloaded from safecom site 2. downloaded fs then kernel (still had to do these in the 192.168.100 subnet) then... I now have the WLAN lit up!! Changed my ip address to 192.168.1.3 and i can telnet to the router and sign on. I try to sign in t...
by adamski
Sun May 14, 2006 12:01 pm
Forum: Firmware
Topic: SWAMR-54108 turned into doorstop
Replies: 44
Views: 85123

Getting there slowly....

Hi Chief/Biro First off, thanks for all the help you've given. It's much appeciated Have been able to connect to router with pctool, the only difference being that the only ip address that is recognised is 192.168. 100 .1 I've uploaded the firmware/fs contained in the pctool and have rebooted, but s...
by adamski
Fri May 12, 2006 11:52 pm
Forum: Firmware
Topic: SWAMR-54108 turned into doorstop
Replies: 44
Views: 85123

SWAMR-54108 turned into doorstop

In my haste the other morning, I made a schoolboy error when flashing the firmware on my one day old SWAMR-54108 router. :cry: Basically, I rebooted it before it had finished it's stuff and now it's toast. I thought I was onto something when I saw the "Origo router USB Flash repair guide", but the j...