ok, thanks ugh gonna take several weeks for the part i need for the make shift serial cable i'm working on to arrive most likley, spent ages looking for instructions on the serial cable lass night very limited info found the pinouts on the openwrt wiki for the adsl2mue and could only find info on th...

My modem was running the april build of routertech and was suffering from the constant reboot bug so i tried playing around with my environment variables but ended up bricking my router the power light comes on then then after a few seconds the WLAN light comes on and starts flashing and just keeps ...

At work i have a Dlink router which i have the newest routertech firmware installed on, i have a computer setup running Ubuntu Server which does most of the stuff for the network (such as dhcp and what not) which is set as the DMZ within the routertech settings. I also have a dynDNS account setup so...

Hi - not sure that I understand you properly - you're not using an ADSL filter to connect your routerto the test socket are you ? Jim At the moment theres a microfilter hooked up to the test socket of which the modem and phone are plugged into, though i usualy have the solwise master faceplate on t...

Shotokan101 wrote:...also you set the MRU on the Router Wan Setup page for your Wan connection name - e.g. quickstart etc.

Jim

Ah, since i'm using bridged mode it doesnt show the mru setting.

Hi - not sure that I understand you properly - you're not using an ADSL filter to connect your routerto the test socket are you ? Jim At the moment theres a microfilter hooked up to the test socket of which the modem and phone are plugged into, though i usualy have the solwise master faceplate on t...

HI your downstream attenuation figure looks very high which could indicate a line fault or just a very long way from the exchange. See this article for some info. https://www.routertech.org/pages.php?page=44 Regarding the "phone pickup" causing loss of sync - are all phone sockets either using an a...

My Modem is syncing at around 768kbps but connects at like 120kbps When I do a speed test on speedtest.net I get around 128kbps download and 368kbps (128kbps at the moment) upload on average Sometimes the modem will connect at the higher speed but I usually lose it again Any help would be appreciate...

I have the correct led config selected and i've done the red light fix but theres a slight inconsistancy with the original led operation on the modem If the modem loses sync after having been connected to the internet and the DSL light starts blinking the internet light stays on but on the official ...