Search found 30 matches

by Dorcots
Sun Nov 25, 2007 9:26 pm
Forum: Firmware
Topic: RT Firmware: Update Configuration does not seem to Work
Replies: 19
Views: 12807

RT Firmware: Update Configuration does not seem to Work

I cannot get my V2.4 router to accept my modified config.bin (or even just my ‘Backup Configuration’ version) and would appreciate if someone could tell me if I am doing any thing wrong. When I run Update Gateway and send config.bin to the router, the update fails giving the wrong screen. Instead of...
by Dorcots
Sun Nov 25, 2007 12:10 pm
Forum: Firmware
Topic: RT Firmware: Access Control Settings doesn’t Save
Replies: 13
Views: 10143

RT Firmware: Access Control Settings doesn’t Save

I am running RouterTech’s “TNETW1350A release” firmware (Oct 2007) on a SWART2-54125 router and cannot get any Access Control settings to save. When I select ‘Apply’, the screen returns to its initial settings. ‘Restore Defaults’ does not help. I have performed a ‘Backup Configuration’, examined ‘co...
by Dorcots
Mon Nov 19, 2007 2:42 pm
Forum: Firmware
Topic: DDNS Settings Won’t Save
Replies: 20
Views: 14145

biro wrote:Just had a play ... with V2.4 settings won't set with v2.3 they do!
Thanks for your contribution, biro. Now I know I am not going mad.

Please put me down to try out any pre-release version as and when its available.
by Dorcots
Wed Nov 14, 2007 9:37 am
Forum: Firmware
Topic: DDNS Settings Won’t Save
Replies: 20
Views: 14145

You could try re-upgrading following another reset to defaults...... Performed a 'System Commands' > 'Restore Defaults', then an 'Update Gateway' > ... > 'Update' (much easier than my previous unbricking using PCTools). Following the automatic reset, I confirmed that I had a 'RouterTech AR7WRD (TNE...
by Dorcots
Tue Nov 13, 2007 11:27 pm
Forum: Firmware
Topic: DDNS Settings Won’t Save
Replies: 20
Views: 14145

The current config will be in the *current_config.bin file. Have now looked there and the settings are the same as the factory default (i.e. nothing saved) except that <updatestatus> has change from 'No IP Address Change' to 'Connection has not acquired IP Address to update'. I have now done anothe...
by Dorcots
Tue Nov 13, 2007 3:23 pm
Forum: Firmware
Topic: DDNS Settings Won’t Save
Replies: 20
Views: 14145

Yes, I lose the lot and put it all in again manually (ISP, LAN group 1 customisation, Wireless SSID etc., DMZ).
by Dorcots
Tue Nov 13, 2007 2:16 pm
Forum: Firmware
Topic: DDNS Settings Won’t Save
Replies: 20
Views: 14145

Yes, I get "... there is no module ddns" in the log. I will try another (third) 'System Commands' > 'Restore Defaults' tonight when I am home (I am using VNC at the moment). However, I wonder whether it is the same cause as your link. My XML snapshot above was the same before and after my last 'Rest...
by Dorcots
Tue Nov 13, 2007 1:41 pm
Forum: Firmware
Topic: DDNS Settings Won’t Save
Replies: 20
Views: 14145

Yes, I tried a 'Save All' then a 'Restart' ( just in case the settings had been applied but not been shown).

Also Status > DDNS Update Status shows 'DDNS Client is Disabled'.
by Dorcots
Tue Nov 13, 2007 9:32 am
Forum: Firmware
Topic: DDNS Settings Won’t Save
Replies: 20
Views: 14145

DDNS Settings Won’t Save

I am running RouterTech’s “TNETW1350A release” firmware (Oct 2007) on a SWART2-54125 router and cannot get any DDNS settings to save. I select ‘DynDNS’ as the ‘DDNS Server’ (it’s the default anyway), check ‘DDNS Client’ and enter the ‘User Name’, ‘Password’ and ‘Domain Name’. When I select ‘Apply’, ...
by Dorcots
Tue Nov 13, 2007 2:38 am
Forum: Firmware
Topic: V5 Firmware for SWART2-54125
Replies: 12
Views: 10955

Yes - As you might expect, I had to run WirelessEnvBuilder.exe.
by Dorcots
Mon Nov 12, 2007 2:56 pm
Forum: Firmware
Topic: V5 Firmware for SWART2-54125
Replies: 12
Views: 10955

Tried that and with some repeated factory restarts (button at the back as well as from the browser) I am now home and dry using the TNETW1350A release of firmware.

Thanks for all your help - I would certainly have been stuck without it.
by Dorcots
Sun Nov 11, 2007 2:42 pm
Forum: Firmware
Topic: V5 Firmware for SWART2-54125
Replies: 12
Views: 10955

Still having trouble and would really appreciate further help. Downloading "RouterTech_ROHS_3.7.1B_20071020_2.4.0_AR7WRD_psbl_firmware.upgrade.img" failed. The PCTools log was as follows: 220 ADAM2 FTP Server ready 331 Password required for adam2 230 User adam2 successfully logged in. 200 Type set t...
by Dorcots
Fri Nov 09, 2007 2:05 am
Forum: Firmware
Topic: V5 Firmware for SWART2-54125
Replies: 12
Views: 10955

The wireless card has two labels: WMTO371 ESTI FW: 120.06.00.06 00120E xxxxxx and ABO 91 F1/OK It seems likely that I will be following the advice to go straight for RT firmware when I am confident on which one to fit. I have been unable to find any TI information on any TNETDnnnn devices. It could ...
by Dorcots
Wed Nov 07, 2007 2:27 am
Forum: Firmware
Topic: V5 Firmware for SWART2-54125
Replies: 12
Views: 10955

V5 Firmware for SWART2-54125

When I tried to upgrade my SWART2-54125 from ‘T370.061227a1_57’ fitting what I thought was the latest version from Safecom, I bricked my SWART2-54125. Then I found this forum and see there is hope. I have started the recovery using PC Tools (that 6-second wait seems critical a period!) and am now re...
by Dorcots
Tue Nov 06, 2007 12:46 pm
Forum: Firmware
Topic: Ebuyer's GWART2-54125 or PTI-8505g stopped working
Replies: 6
Views: 4999

Dosn't sound quite like your problem, but when my SWART2 54125 failed, I only had to reseat the wireles card inside.