I would like to set iptables rules through telnet using, for example, a command like this: # iptables -I FORWARD 2 -p tcp -i ppp0 -d 192.168.1.2 --dport 4662 -j ACCEPT where: - 192.168.1.2 is my PC ip address - 4662 the port I want to open (amule) If i execute this command I can see that the rule is...

Ok, now it's working. Thank you very very much!!! ...even if I had to repartition as suggested by firmware tool (I don't know why, but today the router did not want to work by loading the unsplitted firmware image so I had to fall back on the splitted kernel and filesystem images). This is strange b...

Just as a reminder, it is missing a command after setting partitions: quote MEDIA FLSH However I've done as you indicated and after flashing the firmware only the POWER and ADSL LEDS turn on and the ADSL LED turns on after a lot of time. - No ping to router - No telnet - No web interface Same result...

I am not sure why you want to debate this. Set the correct mtd partition sizes as per the document you linked to (and have reproduced above), and flash the firmware using the PCTool (v2.1) or RRT, or raw ftp, or whatever. ...because I'm confused: I can't understand what is the right way to partitio...

Instead here the way how "firmware tool" says to partition my flash (with reference to this firmware: https://www.routertech.org/download/file.php?id=2065): Splitted images: quote SETENV mtd0,0x90090000,0x901f0000 quote SETENV mtd1,0x90010000,0x90090000 quote SETENV mtd2,0x90000000,0x90010000 quote ...

...I think (and I read somewhere) partition mtd4 is only a temporary partition where the entire firmware image is stored before to split it in the file system and the kernel files which are then loaded respectively in partition mtd0 and mtd1. In fact you can see that the sum of the 5 virtual partiti...

This is not important. I'm able to upgrade throught adam2 ftp server, I'm able to repartition flash memory and if needed I can create an mtd4 partition. Moreover, throught "firmware tool" I can split the image file in two files: the filesystem and the kernel ...so I can put the file system in mtd0 a...

Have you any idea where I can find the latest firmware version for my router (dlink dsl 302T)?

--------------
...according to your compatibility list, this router should be AR7RD and not WRD !

I will try but in the meantime I've restored an old DLINK DSL302T firmware and now the RUC output is the following: Router Upgrade Check 1.4.1 11/07/2013 22.53.56 Router IP: 192.168.1.1 Description: Dlink DSL-302T Board type: AR7WRD Product ID: AR7RD Bootloader: adam2 (probably) RAM 8,0 MB Flash (RO...

...please, could you censor all my mac addresses and my pppoe_sid before publishing my latest post (i forgot to do it and now i'm unable to do)?

Update: I finally managed to load your firmware (I tried another software for ftp). Now the problem is that the router is unable to boot. Yet the Dlink DSL 302T seems to be a supported router! Here my new "env" file: autoload 1 memsize 0x00800000 flashsize 0x00200000 modetty0 38400,n,8,1,hw modetty1...

I forgot to mention that I use the adam2 ftp server to load your software but I have a problem loading the filesytem which always stops to 16384 bytes. Even loading the backupped filesystem (the one of dlink 500T) stops at that figure. I'm beginning to think that ADAM2 has some problems. Excuse me f...

I have problems in running RUC cause my rotuer is a dlink 302T with the firmware of a dlink 500T (I manually charged it through the adam2 ftp server after having resized mtd0 and mtd1 partitions) so RUC says I have to upgrade my firmware to the latest version in way to update to your firmware but th...

My Dlink 302T has 4 partitions while your firmware will require 5 partitions. What I have to do in way to upgrade? Is it possible to repartition (adding a new mtd partition) without losing the bootloader Adam2?