An update: digging through the forum, I noticed someone had this problem because he didn't do the factory reset before changing firmware. I have a question about this: do I need to do a factory reset also AFTER the flashing process is complete, or only BEFORE? Because, if it has to be done twice, I ...

It does not work, I'm sure of it, I checked on no-ip.com the IP address associated to my hostname, and it was not my actual IP address, I had to change it manually, for now. As said before, it seems to work via telnet interface. But I'd really like it to start working again as usual from GUI... EDIT...

Hi everybody I just configured my DLink DSL-G624T using RouterTech firmware V2.9, and I enabled DDNS: I choosed "NO-IP", set my email as username and my password, checked the "DDNS Client" flag and set my domain name. But it doesn't seem to work, 'cause when I click on apply, nothing happens, in fac...

Ok, problem solved! It was a contact problem, I mean, the USB adaptor wasn't correctly inserted in the USB slot...

now... is there anyone who might be able to answer to my second question, the one about configuration for italian provider?

Are you trying to connect wirelessly or via ethernet cable? Wirelessly via DLink USB wireless adapter... It has always worked perfectly... now it won't connect, even if mac is on the allow list and wpa key is correct :S I would check the hardware (i.e., the DLink USB adapter). It sounds reasonable....

As for the page to configure DHCP, it is under the Setup->Lan Configuration->Configure menu. found it! thanks! :oops: Are you trying to connect wirelessly or via ethernet cable? Wirelessly via DLink USB wireless adapter... It has always worked perfectly... now it won't connect, even if mac is on th...

Hi guys :D I have some little questions/problems here. I have just upgraded my router to RT firmware version 2.9, but 1) I cannot find where is the option to enable DHCP 2) my desktop seems unable to connect: I have setup the wireless mac allow list correctly, and also given it static ip address, bu...

successfully updated to 2.9 using PCTools 2.1

I tried also with RTT 1.0.5, but it seems I make some mistake... I don't get it work correctly... Anyway, everything is fine now!

EDIT: I do not seem to be able to find the option to enable DHCP :S where is it?

I'm gonna upgrade right now, from 2.8 to 2.9... I'll let you know if all goes well!

wish me luck

updated my DLink DSL G624T today, with a little of trouble due to PCTool crashing ( ) but now it all works perfectly!

thank you guys!

just a last question: if I do the upgrade to version 2.8, will I need to delete the two environment variables again?

nope... I just removed those environment variables as you recommended... the rest is completely unchanged by my side...

PS: HAPPY NEW YEAR!!!

update: something must have changed in my line Modem Status Connection Status Connected Ds Rate (Kbps) 2304 Us Rate (Kbps) 352 DS Margin 6 US Margin 25 DS Line Attenuation 55 US Line Attenuation 31 Trained Modulation ADSL_G.dmt LOS Errors 0 Peak Cell Rate 830 cells per sec CRC Rx Fast 0 CRC Tx Fast ...

correct o.O

here is the content of my /drivers folder:

ok, I'm acually using dsp73A, so I'll try to use perhaps dsp72A and see if something changes