When I log-in on the router with root via http it gives me a blank screen. Do you really mean 'root' ? Default login is 'Admin' , 'Admin'. Also make sure you clear your browsers cache as it may be trying to load a cached page. If that doesn't work from a telnet try the command 'ps' and check you ha...

Have you read through this Obtaining help with de-bricking bricked routers

One thing to remember is you can only use DMZ for one device so won't be able connect a second 'open' games console / PC.

Shotokan101 wrote:I think you may need the drive installed for the device to work.....

Doesn't require a hard disk to be installed to access the webui

Are any other LED's lit / flashing ? Have you tried a factory reset ? Can you ping 192.168.123.254 ? Have you tried connecting it and a PC through a hub or router, can't remember now if when it's connected to a router it gets an IP through DHCP or if it has to be setup first on it's factory IP ( can...

Doesn't tell us much, can you post the result from 'printenv' (via serial console)

just paste into post rather than uploading a rar file !

Yes or NO? NO The env contains variables specific to that router only such as MAC's for LAN, WAN and the particular wireless card if the details for the wireless card aren't the same as the ones embeded in the wireless card then wireless will not work. ONLY hope of getting wireless back is with Neo...

The Environment Space is identical to the previous PNG I posted. If that is the full ENV then it needs the mtd values set. Try those suggested by mstombs on page 1. Then upload the firmware again. Are you able to connect with PCTool after a long time after it booting (turn it on and leave it for sa...

but on other site (I don't remember where) it looks like: 13 11 9 7 5 3 1 14 12 10 8 6 4 2 Is the usual numbering scheme for a DIL header. Pin 1 will have some sort of mark such as a number one by it on the solwise Sar-600 I think the corner of the outline looks like a triangle. Also Pins 2 4 6 8 a...

11:19:56 | Maximum Number (20) of User Rules Reached What does this mean? Have you been using "User Port Forwarding" ? What can sometimes happen is when the rules are edited they don't get deleted but just marked as 'not in use' so can end up with a rule number '21' even with only a few rules used.

Network IP should be the broadcast IP 192.168.1.0

What (if any) encryption are you using on wireless

What firmware is running on the SWAMR

mstombs wrote: A serial console connection helps a lot.

For ADAM2 bootloader you can get away with linking the Rx and Tx pins as it looks for 'any key' it will see the message 'press any key' as a key press ! unlike PSP which has to be the 'escape' key.

Tried to access the interface to use the reset to factory defaults (it was already at them before the install, so just in case of enumeration..??) but found it yielded an internal error. before the install they would be set for the previous working firmware. I performed a reboot. Left it for 3 minu...

The sound is okay when played on my PC or laptop. How many audio channels / speakers do the PCs have ? Does the TV convert from SCART ( only have 2 channels Left / right on SCART ) to 5.1 / surround, or is it done on the DVD player via Phono connections to TV / Amp or via a coax (or optical) Digita...