My ISP requires Force broadcast ARP on the wan link which was added to my Netgear router with a 3rd party firmware by the DGTeam. I have recently updated to a new Billion router which is now suffering the same fate no through put (loss of routing) if left for more than about 15mins without any data ...

Any clever soul out there know of any 3rd party firm ware that this router may support, I was told that it is the same insides as a Tenda W309R but the firmware from this manufacture does not flash just reboots it.
My hard ware version of the Zonet is V
Cheers

thechief wrote:Try DD-WRT.

Apologies brain problems it’s a DIR-655

Hi All I have a D-Link DIR-665 the version is a b1 NA (North America) hard ware. It was shipped with the original firmware v2.0 I flashed it with DIR655_revB_FW_210 Worked fine, I did try to flash the eu one DIR655B1_FW205B06, but it won’t even load it for flashing, any ideas how to get an E firmwar...

Do you have a RouterTech firmware for the said models

Sorry, but I don't understand what exactly this means. All I know is that if (echo 0 > /proc/sys/net/ipv4/neigh/default/ucast_solicit echo 0 > /proc/sys/net/ipv4/neigh/all/ucast_solicit echo 0 > /proc/sys/net/ipv4/neigh/nas0/ucast_solicit) this script is written to the boot sector of any of the Net...

The commands have been added to older firmware and it works perfect

I guess I will have to wait until someone updates the latest firmware with the commands, thanks for your help

mstombs wrote:there is now a link to the OnConnectWAN script from the udhcpc scripts, where this could be added if needed.

Many thanks for the reply it is appreciated but in English is that a statement or a remedy

Sorry I can’t find the exact problem it’s a bit above my head but I found this explanation: It would appear that when an arp entry is needed, first it looks locally in arp cache. Then it reads a value from /proc/sys/net/ipv4/neigh/<interfacename>/ucast_solicit This value is the number of times the a...

Ok thanks for the reply, many thanks for the short answer as no, well this script is because people on 02 or Be internet that have a dynamic IP address get what has been called loss of routing, the router thinks it’s still connected OK all green LED’s no loss of sink but no through put, the script I...

Hi Is this possible to add these lines into the boot sector of the router using the telnet window if so how is this done as simple as possible please. The code: echo 0 > /proc/sys/net/ipv4/neigh/default/ucast_solicit echo 0 > /proc/sys/net/ipv4/neigh/all/ucast_solicit echo 0 > /proc/sys/net/ipv4/nei...

Upgrade firmware help please DGN2000B The router was an originally for AOL issue not sure if this makes any difference. The problem is using the firmware upgrade in the web interface I get a warning message “Please Use Approved Firmware When Upgrading Your Router” and indeed I am, I have also tried ...

Hi I have a DGN2000, it won’t update official or unofficial firmware comes up with “Please Only Use Approved Firmware When Upgrading Your Router” I have also used the DG834 Recovery Utility (because I can’t find one for the DGN2000) This freezes and cant even find the image file. I also have a DG834...

I’m using a DIR-655 but I never seem to get the schedules to work correctly they fail to work at the times set, I have seen a few threads on the web with reports of funny problem with the schedules on the DIR-655 the questions are is there a fix for this or indeed a better 3rd party firmware availab...