No wireless on dlink g604t after upgrade

[abultoot]

Hi All,
I just upgraded to routertech from dlink's v2 firmware. Only problem is that the wireless interface isn't working.

how can i fix this or revert to the old firmware?

Thanks,
Farah

[studioeng]

Hi All,
I just upgraded to routertech from dlink's v2 firmware. Only problem is that the wireless interface isn't working.

how can i fix this or revert to the old firmware?

Thanks,
Farah

What wireless chipset is the DLink using? Can you please post up the results from this:

Code: Select all

cat /proc/ticfg/env

You may wish to remove/obscure the lines beginning with HWA

[abultoot]

Thanks studioeng, but nothing happens when i run the command.

[studioeng]

Thanks studioeng, but nothing happens when i run the command.

Sorry I should of been a bit more thorough with my previous post.

Are you able to log into the router via telnet or ssh? You need to run the command from that shell; or via 'Run Command' on the System page on the router.

Could you please post the results from these commands, so we can see what the wireless chipset is, and if it has been initalised.

Code: Select all

cat /proc/sys/dev/adam2/environment
cat /proc/modules
cat /proc/interrupts
cat /proc/avalanche/avsar_ver

[thechief]

Thanks studioeng, but nothing happens when i run the command.

Please post the original details of your firmware, including the bootloader environment.

[thechief]

Code: Select all

cat /proc/sys/dev/adam2/environm

I think you mean "cat /proc/sys/dev/adam2/environment".

[studioeng]

I think you mean "cat /proc/sys/dev/adam2/environment".

Indeed; I pasted it in but it must of missed the last part

I'll go sit down at the back again now ....

[abultoot]

Hi Studioeng,

heres the info you requested. thanks a mil!

cat: /proc/sys/dev/adam2/environm: No such file or directory
User command: cat /proc/sys/dev/adam2/environm


tiatm 133520 2
U
User command: cat /proc/modules


7: 25905 R4000 timer/counter [MIPS interrupt]
8: 0 unified secondary [hw0 (Avalanche Primary)]
15: 154 serial [hw0 (Avalanche Primary)]
23: 2153 + SAR [hw0 (Avalanche Primary)]
41: 3115 + Cpmac Driver [hw0 (Avalanche Primary)]
47: 39 + DSL [hw0 (Avalanche Primary)]
User command: cat /proc/interrupts

ATM Driver version:[6.01.03.00]
DSL HAL version: [6.01.02.00]
DSP Datapump version: [6.02.01.00] Annex A
SAR HAL version: [01.07.2c]
PDSP Firmware version:[0.54]
Chipset ID: [7300/7300A]
User command: cat /proc/avalanche/avsar_ver

[abultoot]

thanks the chief, i used the following RouterTech_3.6.0D_20070227_2.20_AR7WRD_Adam2_ATMEL_firmware.upgrade.img

[studioeng]

cat: /proc/sys/dev/adam2/environm: No such file or directory
User command: cat /proc/sys/dev/adam2/environm

Sorry I missed part of the command . Could you please try:

Code: Select all

cat /proc/sys/dev/adam2/environment

Although, looking through what you've posted, it doesn't appear to list the wireless interface; I may be wrong, but I would hazard a guess that it is using a wireless chipset which is not supported by the RT firmware.

Could you try reverting back to the original DLink firmware; just to see if the wireless interface starts working once again.

[abultoot]

thanks studioeng, but i get nothing

the problem is i cant revert the firmware from the web interface although it saya 100 completed, but then it boots with the routertech firmware.

[studioeng]

thanks studioeng, but i get nothing

the problem is i cant revert the firmware from the web interface although it saya 100 completed, but then it boots with the routertech firmware.

Did you perform a factory reset on the router when it finished upgrading??

Another method you may wish to try to get the original firmware back on is with the PCTool; a guide for it here.

[thechief]

thanks the chief, i used the following RouterTech_3.6.0D_20070227_2.20_AR7WRD_Adam2_ATMEL_firmware.upgrade.img

I was referring to the details of what was on the router before you updated the firmware.

[abultoot]

hey chief, thanks for your help, i just bought a belkin router.

FYI I had DSL-G604T_2.00B07.AU_20060901

[abultoot]

THANKS A LOT FOR YOUR HELP I JUST RESTORED IT