Need Help Dlink DSL 2640 T Wireless Issue

Specific forum for all wireless related issues. Even if you have a wireless router, only post here if you have a question about issues with the wireless functionality of it. Questions about wireless access points, cards, hot-spots etc. are also welcome here.
Post Reply
vinibh
Newbie
Newbie
Posts: 4
Joined: Sun Dec 08, 2013 4:13 pm

Need Help Dlink DSL 2640 T Wireless Issue

Post by vinibh » Sun Dec 08, 2013 4:19 pm

Hi, Request help on the issue of EPROM error in wireless please "Error: Failed to get a valid EEPROM Image. AP is DOWN". Posting detailed log here

Jan 1 12:00:10> AP Acquiring Lock
Jan 1 12:00:11> NTP Polling Timer for DHCP Started succesfully.
Jan 1 12:00:11> DSL Polling Timer Started succesfully.
Jan 1 12:00:12> Firewall NAT service started
Jan 1 12:00:12> AP REPORT LOCK ACQUIRED
Jan 1 12:00:12> wlan_handle_load_event - Acquired Lock
Jan 1 12:00:12> MAC address is : 00:1c:f0:3d:82:34
Jan 1 12:00:15> starting on port 80
Jan 1 12:00:15> (c)2000 Netfilter core team
Jan 1 12:00:15> netfilter PSD loaded - (c) astaro AG
Jan 1 12:00:15> Initializing the WAN Bridge.
Jan 1 12:00:15> Please set the MAC Address for the WAN Bridge.
Jan 1 12:00:15> Set the Environment variable 'wan_br_mac'.
Jan 1 12:00:15> xx.xx.xx.xx.xx.xx
Jan 1 12:00:15> Mounted root (squashfs filesystem) readonly.
Jan 1 12:00:15> Mounted devfs on /dev
Jan 1 12:00:15> 64k freed
Jan 1 12:00:15> Algorithmics/MIPS FPU Emulator v1.5
Jan 1 12:00:15> registered device TI Avalanche SAR
Jan 1 12:00:15> Ohio250(7200/7100A2) detected
Jan 1 12:00:15> DSP binary filesize = 356930 bytes
Jan 1 12:00:15> Setting mode to 0xffff
Jan 1 12:00:15> version:[6.00.01.00]
Jan 1 12:00:15> Disable_igmp_snooping_register!!!
Jan 1 12:00:15> Setting mode to 0xffff
Jan 1 12:00:15> Default Asymmetric MTU for nas0 1500
Jan 1 12:00:15> Registering protocol inspector: 0x94177718 for VCC:0x9400da00
Jan 1 12:00:15> Default Asymmetric MTU for br0 1500
Jan 1 12:00:15> Bridge Created: br0
Jan 1 12:00:16> Bridge Created: br1
Jan 1 12:00:16> 2
Jan 1 12:00:16> Default Asymmetric MTU for br1 1500
Jan 1 12:00:16> 2
Jan 1 12:00:16> Bridge Interface Added: eth0
Jan 1 12:00:17> WPA Authenticator Started
Jan 1 12:00:20> Default Asymmetric MTU for wlan0 1500
Jan 1 12:00:20> Default Asymmetric MTU for wdsup0 1500
Jan 1 12:00:20> Default Asymmetric MTU for wdsdw0 1500
Jan 1 12:00:20> Default Asymmetric MTU for wdsdw1 1500
Jan 1 12:00:20> Default Asymmetric MTU for wdsdw2 1500
Jan 1 12:00:20> Default Asymmetric MTU for wdsdw3 1500
Jan 1 12:00:20> Retrieving EEPROM image file nvs_52015c6c42490c22.bin from TFTP Server 192.168.1.100 u .....
Jan 1 12:00:50> ERROR: TFTP of file : nvs_52015c6c42490c22.bin failed
Jan 1 12:00:50> Error: Failed to get a valid EEPROM Image. AP is DOWN
User avatar
thechief
RouterTech Team
RouterTech Team
Posts: 12066
Joined: Wed Feb 01, 2006 10:22 pm
Location: England, the Centre of Africa
Contact:

Re: Need Help Dlink DSL 2640 T Wireless Issue

Post by thechief » Sun Dec 08, 2013 9:34 pm

The Chief: :afro: Be sure to read the Firmware FAQ and do a Forum Search before posting!
No support via PM. Ask all questions on the open forum.
vinibh
Newbie
Newbie
Posts: 4
Joined: Sun Dec 08, 2013 4:13 pm

Re: Need Help Dlink DSL 2640 T Wireless Issue

Post by vinibh » Mon Dec 09, 2013 5:35 am

Thank you for your kind reply. I shall be travelling for work for next 3 days and once back I'll attempt to run the WEB tool. I'll keep you updated with the progress thereafter. Thanks.
vinibh
Newbie
Newbie
Posts: 4
Joined: Sun Dec 08, 2013 4:13 pm

Re: Need Help Dlink DSL 2640 T Wireless Issue

Post by vinibh » Tue Dec 10, 2013 3:17 pm

Hi, I tried to run WirelessEnvBuilder.exe (with admin privilidges too) in my Windows Vista PC. However it crashed (both ways). Now I'll enable Telnet client (it was not till now, as never used it on this pc till date) and will revert with further update.

Thanks
vinibh
Newbie
Newbie
Posts: 4
Joined: Sun Dec 08, 2013 4:13 pm

Re: Need Help Dlink DSL 2640 T Wireless Issue

Post by vinibh » Tue Dec 10, 2013 3:50 pm

Hi Chief, I tried again, after enabling telnet in my windows vista. I am able to telnet (outside of WEB) using admin user and root by giving password. However, the WEB.exe is still crashing (I tried in compatibility mode of XP sp2 etc too).

Kindly guide next steps.
User avatar
thechief
RouterTech Team
RouterTech Team
Posts: 12066
Joined: Wed Feb 01, 2006 10:22 pm
Location: England, the Centre of Africa
Contact:

Re: Need Help Dlink DSL 2640 T Wireless Issue

Post by thechief » Tue Dec 10, 2013 6:57 pm

Try the Firmware Tool.
The Chief: :afro: Be sure to read the Firmware FAQ and do a Forum Search before posting!
No support via PM. Ask all questions on the open forum.
Post Reply