What about Fritz Box Fon?

[felixmarra]

Hi all,

I'm seeing that my fritz box fon 5050 is an ar7 with adam2. I think that it can be modified with routertech. I tried the ruc utility, but it doesn't want to finish the job after the 3%.

So i did a telnet check of the variables under /proc/sys/urlader/environment (it's different from what i read in your faq):

BusyBox v1.5.1 (2007-11-07 22:56:08 CET) Built-in shell (ash)
Enter 'help' for a list of built-in commands.

Hermittle die aktuelle TTY
tty is "/dev/pts/0"
Console Ausgaben auf dieses Terminal umgelenkt
~ $ cat /proc/sys/urlader/environment
HWRevision 72
ProductID Fritz_Box_FON_2
SerialNumber 0000000000000000
annex B
autoload yes
bootloaderVersion 1.203
bootserport tty0
bluetooth 00:04:0E:FF:FF:07
cpufrequency 150000000
firstfreeaddress 0x946B1D78
firmware_version 1und1
firmware_info 12.04.31
flashsize 0x00400000
kernel_args annex=A
maca 00:15:0C:19:7C:10
macb 00:15:0C:19:7C:11
macwlan 00:15:0C:19:7C:12
macdsl 00:15:0C:19:7C:13
memsize 0x01000000
modetty0 38400,n,8,1,hw
modetty1 38400,n,8,1,hw
mtd0 0x90000000,0x90000000
mtd1 0x90010000,0x903C0000
mtd2 0x90000000,0x90010000
mtd3 0x903C0000,0x903E0000
mtd4 0x903E0000,0x90400000
my_ipaddress 192.168.178.1
prompt AVM_Ar7
ptest
reserved 00:04:0E:FF:FF:00
req_fullrate_freq 125000000
sysfrequency 125000000
urlader-version 1203
usb_board_mac 00:15:0C:19:7C:14
usb_rndis_mac 00:15:0C:19:7C:15
usb_device_id 0x3A00
usb_revision_id 0x0200
usb_device_name USB DSL Device
usb_manufacturer_name AVM


This is a version without wireless, but the wireless versions have a TNETW1130GVF chip. If i'm correct it can be ok too for routertech.

Other problem is the voip part built into the fritz box...

Any idea about the possibility to use it, maybe in a future release of routertech?

Thanks to all...

P.S. sorry for my not so perfect english

[Shotokan101]

FRom the command prompt type the following commands and post back the results (after ononymising any personal info. such as MAC adresses)

cat /etc/versions
cat /proc/ticfg/env
cat /proc/modules
cat /proc/interrupts
cat /proc/avalanche/avsar_ver

[felixmarra]

FRom the command prompt type the following commands and post back the results (after ononymising any personal info. such as MAC adresses)

cat /etc/versions
cat /proc/ticfg/env
cat /proc/modules
cat /proc/interrupts
cat /proc/avalanche/avsar_ver

cat /proc/ticfg/env is not possible... not such file or dir... anyway, this is the result of the commands (in sequence):


BusyBox v1.5.1 (2007-11-07 22:56:08 CET) Built-in shell (ash)
Enter 'help' for a list of built-in commands.

ermittle die aktuelle TTY
tty is "/dev/pts/0"
Console Ausgaben auf dieses Terminal umgelenkt
~ $ cat /etc/version
#! /bin/sh
#
SILENT=y
. /etc/init.d/rc.conf
export FIRMWARE_VERSION=${CONFIG_VERSION_MAJOR}.04.31
export FIRMWARE_SUBVERSION="ds26-15.2"
export FIRMWARE_DATE="12.03.2007 15:46:55"


#########################################################
BUILD=0.1
TI_VER=3.3.0
BOARD=AR7RD
FSSTAMP=20070312154655


#########################################################


#########################################################
if [ -z "$*" ] ; then
echo $FIRMWARE_VERSION
fi


#########################################################
for i in $* ; do
case $i in
-v|--version)
echo $FIRMWARE_VERSION
;;
-vsub|--subversion)
echo $FIRMWARE_SUBVERSION
;;
--project)
echo 6432
;;
-d|--date)
echo $FIRMWARE_DATE
;;
--install=${CONFIG_INSTALL_TYPE})
echo korrekt install type: ${CONFIG_INSTALL_TYPE}
exit 0
;;
*)
echo install type not korrekt: ${CONFIG_INSTALL_TYPE}
exit 1
;;
esac
done
~ $ cat /proc/ticfg/env
cat: /proc/ticfg/env: No such file or directory
~ $ cat /proc/modules
userman 30240 2 - Live 0xc00fb000
kdsldmod 540800 5 userman, Live 0xc0075000
avalanche_usb 45728 0 - Live 0xc0068000
isdn_fbox_fon2 659488 0 - Live 0xc010c000
ubik2 74544 3 isdn_fbox_fon2, Live 0xc0054000
tiatm 109184 1 ubik2, Live 0xc0038000
~ $ cat /proc/interrupts
CPU0
1: 63163 AR7 System system timer
6: 51300 AR7 System AR7 primary
15: 22946 AR7 primary serial
23: 4631 AR7 primary SAR
27: 5622 AR7 primary Cpmac Driver
32: 2 AR7 primary USB
41: 12 AR7 primary Cpmac Driver
47: 18087 AR7 primary DSL

ERR: 0
~ $ cat /proc/avalanche/avsar_ver
ATM Driver version:[4.06.04.41]
DSL HAL version: [5.00.00.02]
DSP Datapump version: [1.35.73.00]
SAR HAL version: [01.07.2b]
PDSP Firmware version:[0.54]
~ $


Please note that this is a modded firmware (a translation from german to english plus some ds-mod that i don't use... this firmware is not made from me. Anyway if you need the original firmware i can put the original back).

Thank you!