AG241V2 - Can't Startup

Support forum for routers of all shapes and sizes. As long as it's router based and doesn't fall into the other categories, this is the place to ask your questions.
Post Reply
waiket
Newbie
Newbie
Posts: 1
Joined: Sun Jun 29, 2008 1:59 pm

AG241V2 - Can't Startup

Post by waiket » Sun Jun 29, 2008 2:12 pm

Currently i have a Linksys AG241V2 bought at Malaysia. Not sure which Annex is it, can't find any indicates from the case box nor the router casing. Just found a hint from the bottom right corner of the last page of the manual:

AG241-AU-QI-41221NC JL

So, here is the problem:
- Can't establish connection with my ISP since i restarted it for the last time.
- The power LED keep flashing (green light)
- Dun hv any respond when ping 192.168.1.1 (request timeout)
- Can't login the router setup page (connection timeout)
- Only static IP computer are connected to each other, the rest dynamic IP computer can't get any assigned IP from the router.

Tried Solution:
- pressed the reset button to reset to factory default setting. (FAIL)
- pressed the reset button for about 30 seconds as heard from friends it will lead to the firmware page if success in connect to the router. (FAIL)

Currently:
- i'm totally don't have any experience in dealing with troubleshooting of networking devices.
- the router's warranty is expired.
- willing to give it a try to gain some experience as well as willing to learn.
- please give me a step by step guide on what should i do to repair this router? i'm quite noob in english so please forgive me for broken language.
- Thus, anyone out there willing to teach me? Thanks in advance. :)
Post Reply