Mecer 4 port adsl router wlan

Support forum for routers of all shapes and sizes. As long as it's router based and doesn't fall into the other categories, this is the place to ask your questions.
Post Reply
Silurian
Newbie
Newbie
Posts: 1
Joined: Tue Oct 13, 2009 9:55 pm

Mecer 4 port adsl router wlan

Post by Silurian » Wed Oct 14, 2009 9:19 am

hey guys

i have a mecer branded router with is basically a conextant router

it is running RAS version: 2.7.0.28
i would like to know if it is possible to change the pppoe username and password via telnet
and if so how do i do it
RAS version: 2.7.0.28(RUE0.B1)3.5.10.6| 2006/5/18
System ID: 2.7.0.28(RUE0.B1)3.5.10.6[May 18 2006 21:24:45]
romRasSize: 1156170
system up time: 41:09:33 (e21831 ticks)
bootbase version: VTC1.12 | 2006/8/16

Hostname = Wan0
Message = <empty>
ip route mode = Yes
bridge mode = Yes
DHCP setting:
DHCP Mode = Server
Client IP Pool Starting Address = 192.168.1.33
Size of Client IP Pool = 32
Primary DNS Server = 0.0.0.0
Secondary DNS Server = 0.0.0.0
DHCP server leasetime = 259200
TCP/IP Setup:
IP Address = 192.168.1.1
IP Subnet Mask = 255.255.255.0
Rip Direction = None
Version = Rip-2B
Multicast = None

RemoteNode = 0
Rem Node Name = Node1(ISP)
Encapsulation = PPPoE
Multiplexing = LLC-based
Channel active = Yes
VPI/VCI value = 8/35
IP Routing mode= Yes
Bridge mode = No
PPP Username = alsmost forgot to take this out

PPP Password = hehehe

Service name =
Remote IP Addr = 0.0.0.0
Remote IP Subnet Mask = 0.0.0.0
IP address assignment type = Dynamic
SUA = Yes
Multicast = None
Default Route node = Yes

RemoteNode = 1
Rem Node Name = Node2
Encapsulation = RFC 1483
Multiplexing = LLC-based
Channel active = No
VPI/VCI value = 0/34
IP Routing mode= No
Bridge mode = Yes
Remote IP Addr = 0.0.0.0
Remote IP Subnet Mask = 0.0.0.0
IP address assignment type = Dynamic
SUA = No
Multicast = None
Default Route node = No

RemoteNode = 2
Rem Node Name = Node3
Encapsulation = RFC 1483
Multiplexing = LLC-based
Channel active = No
VPI/VCI value = 0/35
IP Routing mode= No
Bridge mode = Yes
Remote IP Addr = 0.0.0.0
Remote IP Subnet Mask = 0.0.0.0
IP address assignment type = Dynamic
SUA = No
Multicast = None
Default Route node = No

RemoteNode = 3
Rem Node Name = Node4
Encapsulation = RFC 1483
Multiplexing = LLC-based
Channel active = No
VPI/VCI value = 0/36
IP Routing mode= No
Bridge mode = Yes
Remote IP Addr = 0.0.0.0
Remote IP Subnet Mask = 0.0.0.0
IP address assignment type = Dynamic
SUA = No
Multicast = None
Default Route node = No

RemoteNode = 4
Rem Node Name = Node5
Encapsulation = RFC 1483
Multiplexing = LLC-based
Channel active = No
VPI/VCI value = 0/37
IP Routing mode= No
Bridge mode = Yes
Remote IP Addr = 0.0.0.0
Remote IP Subnet Mask = 0.0.0.0
IP address assignment type = Dynamic
SUA = No
Multicast = None
Default Route node = No

RemoteNode = 5
Rem Node Name = Node6
Encapsulation = RFC 1483
Multiplexing = LLC-based
Channel active = No
VPI/VCI value = 0/38
IP Routing mode= No
Bridge mode = Yes
Remote IP Addr = 0.0.0.0
Remote IP Subnet Mask = 0.0.0.0
IP address assignment type = Dynamic
SUA = No
Multicast = None
Default Route node = No

RemoteNode = 6
Rem Node Name = Node7
Encapsulation = RFC 1483
Multiplexing = LLC-based
Channel active = No
VPI/VCI value = 0/39
IP Routing mode= No
Bridge mode = Yes
Remote IP Addr = 0.0.0.0
Remote IP Subnet Mask = 0.0.0.0
IP address assignment type = Dynamic
SUA = No
Multicast = None
Default Route node = No

RemoteNode = 7
Rem Node Name = Node8
Encapsulation = RFC 1483
Multiplexing = LLC-based
Channel active = No
VPI/VCI value = 0/40
IP Routing mode= No
Bridge mode = Yes
Remote IP Addr = 0.0.0.0
Remote IP Subnet Mask = 0.0.0.0
IP address assignment type = Dynamic
SUA = No
Multicast = None
Default Route node = No
theres the info i got from the show all command
thanx
Post Reply