asmax ar 804gu alias Solwise SAR-600EW ADSL2/2+ env brick

[brylok1981]

My router suddenly stop working i spouse environment bric, i had the same problem few years ago.

ip 192.168.1.1 don't working

i now that adam2 boot loader has different ip when environment is corrupted but i don't remember it can you help?

boot loader version 0.22.03

[mstombs]

D-Link often go to something like 5.8.8.8 but the default is usually in the APIPA (Automatic Private IP Addressing) range 169.254.0.0 -169.254.255.255 (for example 169.254.87.1), which windows PCs set to auto-dhcp should also go to. If the bootloader and network port working the PC-Tool should be able to find the IP. Good luck!

[brylok1981]

pc tool unfortunately can't find ip tiupgrade also

when i power up router the power led light green and Ethernet led where cable is inserted

it is possible to boot loader don't start?

[mstombs]

Sometimes the bootloader gets stuck in a reboot loop but then the lights often can be seen to cycle. Likely the switch LEDs are effectively hardware - so do not require cpu. Have you checked the PSU/ tried another?

[brylok1981]

PSU..?

power led is green all time

i check pc tools 2.1 and 2.3, tiupgrade and rrt and nothing

[mstombs]

PSU..?

The power supply brick - 9V on that old router isn't it?

[brylok1981]

yes 9V it seams to by ok

i will tray to do usb serial cable from nokia dku-5

[brylok1981]

Hi

I don't have dku-5 right now, but i have ca-53 can i use this cable as serial?

[thechief]

Don't know - but you can try a ready-made one; see firmware-faq/#serial_console

[mstombs]

Hi

I don't have dku-5 right now, but i have ca-53 can i use this cable as serial?

The dku-5 is not the only one, ca-42 is another, but some some Nokia cables are just straight-through cable connectors without the 3.3V level shifter and definitely will not work, see also
https://forum.openwrt.org/viewtopic.php?pid=118756

Also note most cheap cables on ebay are cheap clones which can be made to work with similar phones to the Nokia original and many phones can work in different modes with different cables so don't take anything for granted!

[brylok1981]

HI again

I don't have time to play with wires so...
i have found some ready cable

1. http://www.sklep-elektroniczny.com.pl/k ... em204.html

2. http://www.sklep-elektroniczny.com.pl/k ... m-210.html

can i use those cables? witch we'll be better?

[thechief]

You don't know how the header has been wired - the wiring may be unsuitable for your router.

If you want ready-made cables, read this: firmware-faq/#serial_console

[mstombs]

Whatever you get it needs to be 3.3V at the router end.