speedstream5450

peter15 · Post by **peter15** » Wed Sep 21, 2011 3:12 pm

hello everyone,

my neighbour gave me a siemens speedstream 5450.
it is similar to the d-link DSL-5xxx family
i opend the device and i saw that there was a ar7 based cpu.
the ti tnetd7300
does anyone know if i could change the firmware for this device?
i alread put a heatsink on the cpu.
and i added a fan to the case.

greetings,peter

Post by **thechief** » Wed Sep 21, 2011 3:57 pm

Please stop posting the same question. You have already asked this question, and I have already referred you to the RUC: viewtopic.php?t=1062

peter15 · Post by **peter15** » Thu Sep 22, 2011 1:05 pm

but the ruc hangs at 1%

Post by **thechief** » Thu Sep 22, 2011 6:12 pm

Read the entire RUC thread, and the RUC docs. If that doesn't help, then try the Firmware Tool: viewtopic.php?t=3101

peter15 · Post by **peter15** » Fri Sep 23, 2011 7:31 am

okay thanks

peter15 · Post by **peter15** » Mon Sep 26, 2011 3:38 pm

i can't telnet into the device.
i am useing win xp pro.
when i type telnet 192.168.254.254 it says that it can't connect.
i rebooted the device to factory defaults but it did not help.
i can ping to it .
it worked once but now it doesn't work anymore.
can someone please help me
i did a port forward for port 23

paaaja · Post by **paaaja** » Mon Sep 26, 2011 4:30 pm

peter15 wrote:when i type telnet 192.168.254.254...

This will not help you at all. This address belongs to APIPA range. It basically means that your router's DHCP server isn't working properly.
You need to telnet the IP address of your router, which is (probably) 192.168.1.1. At least all Routertech firmwares have this one set as default. And, of course, I don't know the settings of your original firmware.

paaaja · Post by **paaaja** » Mon Sep 26, 2011 4:50 pm

Sorry, I was mistaken. I accidentaly looked at another post elsewhere. You have the right address. Try Wireshark or some similar utility to see the ip address of your router.

peter15 · Post by **peter15** » Tue Sep 27, 2011 3:36 pm

thanx a lot i am going to test it tomorrow

peter15 · Post by **peter15** » Tue Oct 04, 2011 9:28 am

it wont work either.
does somebody knows how i can change the firware via the web interface?

Post by **thechief** » Tue Oct 04, 2011 10:23 am

What exactly is the situation right now?

peter15 · Post by **peter15** » Fri Oct 07, 2011 11:59 am

the ruc hangs at 1%
the firmware tool doesn't do anything.

i dont know what i have to do now.

Post by **thechief** » Fri Oct 07, 2011 3:41 pm

Neither of them will work if you can't connect with telnet. Get telnet working first, and then try again. What is the output of "ipconfig /all" ?

peter15 · Post by **peter15** » Fri Oct 14, 2011 10:12 am

it did work but when i updated the firmware to the newest siemens firmware it didn't work anymore

speedstream5450

speedstream5450

Re: speedstream5450

Re: speedstream5450

Re: speedstream5450

Re: speedstream5450

Re: speedstream5450

Re: speedstream5450

Re: speedstream5450

Re: speedstream5450

Re: speedstream5450

Re: speedstream5450

Re: speedstream5450

Re: speedstream5450

Re: speedstream5450