hello
i need to open port in port forward but i can't find the advanced setup in the
menu
in the picture bellow you can see all menu
please there is any solution?
P.S
i m connecting with WiFi i can't connect by the cable RJ45
tnx
sagem fast 1704
- thechief
- RouterTech Team
- Posts: 12067
- Joined: Wed Feb 01, 2006 10:22 pm
- Location: England, the Centre of Africa
- Contact:
Re: sagem fast 1704
Perhaps the firmware has been trimmed down to remove some features. Is this from your ISP ?
The Chief: Be sure to read the Firmware FAQ and do a Forum Search before posting!
No support via PM. Ask all questions on the open forum.
No support via PM. Ask all questions on the open forum.
Re: sagem fast 1704
yes i think that
i read it in another forum the operator do that for more protection so we can't connect in advanced options .
in the the same forum in another firmware for this router they login with another admin and password to do that but in this version of firmware no yet .
so this why i ask if you have a trick like that
i read it in another forum the operator do that for more protection so we can't connect in advanced options .
in the the same forum in another firmware for this router they login with another admin and password to do that but in this version of firmware no yet .
so this why i ask if you have a trick like that
- thechief
- RouterTech Team
- Posts: 12067
- Joined: Wed Feb 01, 2006 10:22 pm
- Location: England, the Centre of Africa
- Contact:
Re: sagem fast 1704
Well, you might want to change your firmware to one that supports advanced functions.
The Chief: Be sure to read the Firmware FAQ and do a Forum Search before posting!
No support via PM. Ask all questions on the open forum.
No support via PM. Ask all questions on the open forum.
Re: sagem fast 1704
no , i want to keep the firmware because the router it's not mine
i think the advanced menu is hidden because i connect with WiFi ( i can't connect via RJ45)
it's the kind of protection i read it when i'm googling
so there is any trick without change the firmware?
tnx for replying
i think the advanced menu is hidden because i connect with WiFi ( i can't connect via RJ45)
it's the kind of protection i read it when i'm googling
so there is any trick without change the firmware?
tnx for replying
- thechief
- RouterTech Team
- Posts: 12067
- Joined: Wed Feb 01, 2006 10:22 pm
- Location: England, the Centre of Africa
- Contact:
Re: sagem fast 1704
Sorry, no idea.skybird wrote:so there is any trick without change the firmware?
The Chief: Be sure to read the Firmware FAQ and do a Forum Search before posting!
No support via PM. Ask all questions on the open forum.
No support via PM. Ask all questions on the open forum.
Re: sagem fast 1704
you can try setting port forwarding rule and other advanced settings using a telnet session to the router
but that may or may not be possible
some time ISP's leave the telnet port open and do not remove the functionality for a a support technician
first you need to find the telnet username /password
and if you are able to login see what options are available by tyoing " ?" or " /? " at the prompt after logging in to a telnet session
use putty
or if using winxp just type telnet at cmd prompt
(telnet port is 23 ip is your router/modem address usually 192.168.1.1)
but that may or may not be possible
some time ISP's leave the telnet port open and do not remove the functionality for a a support technician
first you need to find the telnet username /password
and if you are able to login see what options are available by tyoing " ?" or " /? " at the prompt after logging in to a telnet session
use putty
or if using winxp just type telnet at cmd prompt
(telnet port is 23 ip is your router/modem address usually 192.168.1.1)
Re: sagem fast 1704
hello
tnx thechief and duke for replynig
duke
now i use telnet cmd i can access to the router but i don't know how to add a open port for example
when i open the advanced options i n another router i just click on port forwarding and i add a service name ex : xbox
and i add udp and tcp port 6767
now how can i do it in telnet cmd ??
in the picture bellow all options in telnet cmd
tnx again for your help
sorry for my bad english
tnx thechief and duke for replynig
duke
now i use telnet cmd i can access to the router but i don't know how to add a open port for example
when i open the advanced options i n another router i just click on port forwarding and i add a service name ex : xbox
and i add udp and tcp port 6767
now how can i do it in telnet cmd ??
in the picture bellow all options in telnet cmd
tnx again for your help
sorry for my bad english
- Attachments
-
- Untitled.png
- (8.25 KiB) Not downloaded yet