Did i kill my DSL 300T??

Support forum for routers of all shapes and sizes. As long as it's router based and doesn't fall into the other categories, this is the place to ask your questions.
Post Reply
Xanatos82
Newbie
Newbie
Posts: 1
Joined: Sat Oct 08, 2016 2:08 pm

Did i kill my DSL 300T??

Post by Xanatos82 » Sat Oct 08, 2016 2:24 pm

Hi! I've an old DSL-300T, and yesterday I was trying to make an upgrade of the firmware (on the router there still was the original one).
Obviously, the upgrade went wrong, and now my DSL-300T is bricked. If I connect it to the power, I can see only the power led and obviously the router doesn't reply to the ethernet connection.
What can I do to restore it?
If I try to load a new firmware with TiUpgrade I have this error:
"Script error:FTP Timeout!
The device address is 10.8.8.8.
Please change your machine IP address for the same subnet, and then re-running this utility"
I have the same message if I set my LAN with a static ip with:
IP: 10.8.8.9
Subnet Mask: 255.255.255.0
Gateway: 10.8.8.8

or

IP:192.168.1.2
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.1
(I'm using a notebook with W10 - 64bit)
User avatar
thechief
RouterTech Team
RouterTech Team
Posts: 12067
Joined: Wed Feb 01, 2006 10:22 pm
Location: England, the Centre of Africa
Contact:

Re: Did i kill my DSL 300T??

Post by thechief » Sun Oct 09, 2016 6:10 pm

The Chief: :afro: Be sure to read the Firmware FAQ and do a Forum Search before posting!
No support via PM. Ask all questions on the open forum.
Post Reply