Hi! I've an old DSL-300T, and yesterday I was trying to make an upgrade of the firmware (on the router there still was the original one).
Obviously, the upgrade went wrong, and now my DSL-300T is bricked. If I connect it to the power, I can see only the power led and obviously the router doesn't reply to the ethernet connection.
What can I do to restore it?
If I try to load a new firmware with TiUpgrade I have this error:
"Script error:FTP Timeout!
The device address is 10.8.8.8.
Please change your machine IP address for the same subnet, and then re-running this utility"
I have the same message if I set my LAN with a static ip with:
IP: 10.8.8.9
Subnet Mask: 255.255.255.0
Gateway: 10.8.8.8
or
IP:192.168.1.2
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.1
(I'm using a notebook with W10 - 64bit)
Did i kill my DSL 300T??
- thechief
- RouterTech Team
- Posts: 12067
- Joined: Wed Feb 01, 2006 10:22 pm
- Location: England, the Centre of Africa
- Contact:
Re: Did i kill my DSL 300T??
The Chief: Be sure to read the Firmware FAQ and do a Forum Search before posting!
No support via PM. Ask all questions on the open forum.
No support via PM. Ask all questions on the open forum.