Hello, thank your for reading this post!
I can't seems to access my router configuration anymore.
I've disabled firewall and tried to flush renew and reset IP's, no luck.
I am starting to think there is something wrong with my network architecture, but I am not well versed in this matters.
This is my current config on this station:
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Link-local IPv6 Address . . . . . : *************
IPv4 Address. . . . . . . . . . . : 192.168.1.8
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : *****************
192.168.1.254
This setup was done by an ISP technician.
It's the first time I see someone using 192.168.1.254 as the default gateway.
I use to be able to access router config with 192.168.1.254 but not anymore. Last time I accessed it, I have enabled firewall on the router and another setting for DDOS I think. My first reaction was to think that it might be these new settings.
However I would like to know if the configuration above is OK. If not (IMPORTANT):
How do I change the router IP configuration without being to access the router?
Thanks you,
Regards
Cannot access to router config, different subnet?
-
- Newbie
- Posts: 2
- Joined: Wed Dec 01, 2021 6:33 am
Re: Cannot access to router config, different subnet?
Has it been repaired after many years? Probably bought a new one.Magalie24 wrote: ↑Thu Jan 12, 2017 3:44 amHello, thank your for reading this post!
https://berich.eu/pattern-trader-czy-to-scam-poznaj-opinie-ekspertow-i-uzytkownikow/
I can't seems to access my router configuration anymore.
I've disabled firewall and tried to flush renew and reset IP's, no luck.
I am starting to think there is something wrong with my network architecture, but I am not well versed in this matters.
This is my current config on this station:
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Link-local IPv6 Address . . . . . : *************
IPv4 Address. . . . . . . . . . . : 192.168.1.8
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : *****************
192.168.1.254
This setup was done by an ISP technician.
It's the first time I see someone using 192.168.1.254 as the default gateway.
I use to be able to access router config with 192.168.1.254 but not anymore. Last time I accessed it, I have enabled firewall on the router and another setting for DDOS I think. My first reaction was to think that it might be these new settings.
However I would like to know if the configuration above is OK. If not (IMPORTANT):
How do I change the router IP configuration without being to access the router?
Thanks you,
Regards