Router Stats Logger
The latest version (1.0.26) is now available, in which the exchange info fetching should work again
By the way, unless you have moved location, you only need to click on the "Get distance via Internet (UK only)" button once - the exchange details should be saved by the RSL for future reference.
By the way, unless you have moved location, you only need to click on the "Get distance via Internet (UK only)" button once - the exchange details should be saved by the RSL for future reference.
RouterTech Team and Founding Member
RouterTech Merchandise (UK)
No support via PM, please ask your questions on the forum!
RouterTech Merchandise (UK)
No support via PM, please ask your questions on the forum!
- Shotokan101
- RouterTech Team
- Posts: 4779
- Joined: Thu Jan 26, 2006 3:17 pm
- Location: Glasgow, Scotland
Neo,
A feedback regarding Error 13 message, attached screenshot for you and pasted the following line from the errorlog.txt file.
#2008-07-02 23:59:17#,"13","Type mismatch","frmMain","FindBestFromRealDistance","Router Stats Logger v1.0.26","PJ","PJO-HOME"
The steps to get this error are as followed:
1. Extracts files to folder.
2. Run stats logger program.
3. Enter IP address and password and time intervals to 5 mins instead of 1 min.
4. Click on Get router info.
5. Click on Exchange Tab.
6. Click on get distance via Internet button, enter postcaode.
7. Exchanged found, then click on Calculate best results based on exchange info.
8. Error message 13.
9. Click on Stats tab and redid get router info.
10. Click on calculate best result, gives error 13.
11. Close router stats logger software.
12. Re-run stats logger.
13. Click on get router info.
14. Click on Exchange tab and click on calculate bets results.
15. All is fine now.
Hopes this help Neo in seeing what gone wrong etc.
Thanks, PJ.
A feedback regarding Error 13 message, attached screenshot for you and pasted the following line from the errorlog.txt file.
#2008-07-02 23:59:17#,"13","Type mismatch","frmMain","FindBestFromRealDistance","Router Stats Logger v1.0.26","PJ","PJO-HOME"
The steps to get this error are as followed:
1. Extracts files to folder.
2. Run stats logger program.
3. Enter IP address and password and time intervals to 5 mins instead of 1 min.
4. Click on Get router info.
5. Click on Exchange Tab.
6. Click on get distance via Internet button, enter postcaode.
7. Exchanged found, then click on Calculate best results based on exchange info.
8. Error message 13.
9. Click on Stats tab and redid get router info.
10. Click on calculate best result, gives error 13.
11. Close router stats logger software.
12. Re-run stats logger.
13. Click on get router info.
14. Click on Exchange tab and click on calculate bets results.
15. All is fine now.
Hopes this help Neo in seeing what gone wrong etc.
Thanks, PJ.
- Attachments
-
- finalresult.JPG
- After the steps of closing and re-opening the logger, all is fine.
- (73.74 KiB) Downloaded 754 times
-
- Error13a.jpg
- To show the error screen!
- (62.46 KiB) Downloaded 754 times
Thanks for the feedback, PJ36
The only way I can reproduce the error is if I enter some invalid characters into the setting file for the loss rate (which should be 13.81 by default). I noticed in the screenshot with the error that the "Cable Loss" value appears to be missing or invalid.
I have updated 1.0.26 to try to prevent this happening - please try it again at your earliest convenience
The only way I can reproduce the error is if I enter some invalid characters into the setting file for the loss rate (which should be 13.81 by default). I noticed in the screenshot with the error that the "Cable Loss" value appears to be missing or invalid.
I have updated 1.0.26 to try to prevent this happening - please try it again at your earliest convenience
RouterTech Team and Founding Member
RouterTech Merchandise (UK)
No support via PM, please ask your questions on the forum!
RouterTech Merchandise (UK)
No support via PM, please ask your questions on the forum!
Neo,
Before re-trying again I just backed up stats.txt file fro the prevous monitoriing, and delted the files all of them completly and re-instaleld the new version.
Happy to tell you no error 13 message at all, didn't have to close down the logger at all was able to get router info and get distance and calculate best with no needs to close down.
Thanks, Neo, maybe I am the only one interested in this exchange? But I am doign this for a reason because if the router logger says I should be able to achieve a sync speed according to the info about my exchange and my distance etc.
Thanks PJ.
Before re-trying again I just backed up stats.txt file fro the prevous monitoriing, and delted the files all of them completly and re-instaleld the new version.
Happy to tell you no error 13 message at all, didn't have to close down the logger at all was able to get router info and get distance and calculate best with no needs to close down.
Thanks, Neo, maybe I am the only one interested in this exchange? But I am doign this for a reason because if the router logger says I should be able to achieve a sync speed according to the info about my exchange and my distance etc.
Thanks PJ.
Thanks for the additional feedback, PJ36, I'm glad it's working OK for you now
The exchange info can be handy and I think it saves a bit of time over doing the calculations manually (when it works) . I expect there will always be a difference between the estimated and actual distances since the loss rate is only theoretical and there is always some source of interference/degradation between the exchange and the router.
The exchange info can be handy and I think it saves a bit of time over doing the calculations manually (when it works) . I expect there will always be a difference between the estimated and actual distances since the loss rate is only theoretical and there is always some source of interference/degradation between the exchange and the router.
RouterTech Team and Founding Member
RouterTech Merchandise (UK)
No support via PM, please ask your questions on the forum!
RouterTech Merchandise (UK)
No support via PM, please ask your questions on the forum!
RouterTech Team and Founding Member
RouterTech Merchandise (UK)
No support via PM, please ask your questions on the forum!
RouterTech Merchandise (UK)
No support via PM, please ask your questions on the forum!
Error 13 everytime
Hello, i started latest RSL and Error 13 appear. Its every start. I click ok and i can continue. But its annoying to click everytime to ok See attachment
- Attachments
-
- error13.png (7.99 KiB) Viewed 12827 times
It seems that the exchange data table (used for IP profile calculations) has been corrupted somehow - can you try deleting all the files in the current RSL folder and download 1.0.27 again?
Or alternatively, perhaps your PC's region settings are somehow interfering? This Windows 98 example shows the number setting: http://www.youthtech.com/techstuff/expl ... onset1.htm What regional settings do you have?
Or alternatively, perhaps your PC's region settings are somehow interfering? This Windows 98 example shows the number setting: http://www.youthtech.com/techstuff/expl ... onset1.htm What regional settings do you have?
RouterTech Team and Founding Member
RouterTech Merchandise (UK)
No support via PM, please ask your questions on the forum!
RouterTech Merchandise (UK)
No support via PM, please ask your questions on the forum!
Thanks for your kind words, LinerX
RouterTech Team and Founding Member
RouterTech Merchandise (UK)
No support via PM, please ask your questions on the forum!
RouterTech Merchandise (UK)
No support via PM, please ask your questions on the forum!
Target Noise Margin
Hi Neo,
I want to ask you for a Option to adjust the Target Noise Margin manual in both directions.
(less margin for more speed, more margin for less Speed and more stability).
We haven't found a real Option for that in the Stats Logger.
We are working with,
DSP Datapump version: [7.03.00.19] Annex B
(all advanced Options are avalible)
A option for that would be very helpfull/needfull !
We have found and tested some options to boost the Downstream Speed
but we haven't found anything to adjust the Target Noise Margin manual.
I want to ask you for a Option to adjust the Target Noise Margin manual in both directions.
(less margin for more speed, more margin for less Speed and more stability).
We haven't found a real Option for that in the Stats Logger.
We are working with,
DSP Datapump version: [7.03.00.19] Annex B
(all advanced Options are avalible)
A option for that would be very helpfull/needfull !
We have found and tested some options to boost the Downstream Speed
but we haven't found anything to adjust the Target Noise Margin manual.
Re: Target Noise Margin
Hi LinerX,
If those don't do what you want, I don't think I can add the feature to the RSL because all the things it can do (with regard to tweaking the router's connection), it does already (hope that makes sense ).
The RSL can only make use of what is made available by the router's hardware/firmware. There is the 'Retrain margin' feature (under the 'Settings' tab) and more advanced settings such as DSLFC0 (bit) 25, which adds a "2dB additional noise margin to improve the long term line stability". Indirectly, those should affect the speed.LinerX wrote:I want to ask you for a Option to adjust the Target Noise Margin manual in both directions.
(less margin for more speed, more margin for less Speed and more stability).
We haven't found a real Option for that in the Stats Logger.
If those don't do what you want, I don't think I can add the feature to the RSL because all the things it can do (with regard to tweaking the router's connection), it does already (hope that makes sense ).
RouterTech Team and Founding Member
RouterTech Merchandise (UK)
No support via PM, please ask your questions on the forum!
RouterTech Merchandise (UK)
No support via PM, please ask your questions on the forum!