Hello,
It is possible to configure the OpenVPN server side bridge?
The network topoly is: the second router it's connected to the first one through eth ports.
The ifconfig after the openvpn had been started:
br0 Link encap:Ethernet HWaddr 00:0F:3D:B8:A3:DD
inet addr:192.168.0.2 Bcast:192.168.255.255 Mask:255.255.0.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:25474 errors:0 dropped:0 overruns:0 frame:0
TX packets:14345 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:5693646 (5.4 MiB) TX bytes:1782613 (1.6 MiB)
br1 Link encap:Ethernet HWaddr 00:00:00:00:00:00
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
br2 Link encap:Ethernet HWaddr 00:00:00:00:00:00
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
eth0 Link encap:Ethernet HWaddr 00:0F:3D:B8:A3:DD
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:29128 errors:0 dropped:0 overruns:0 frame:0
TX packets:18606 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:8725822 (8.3 MiB) TX bytes:2190340 (2.0 MiB)
Base address:0x2800
eth1 Link encap:Ethernet HWaddr 82:0F:3D:B8:A3:DD
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:29128 errors:0 dropped:0 overruns:0 frame:0
TX packets:18606 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:8725822 (8.3 MiB) TX bytes:2190340 (2.0 MiB)
Base address:0x2800
eth2 Link encap:Ethernet HWaddr 92:0F:3D:B8:A3:DD
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:29128 errors:0 dropped:0 overruns:0 frame:0
TX packets:18606 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:8725822 (8.3 MiB) TX bytes:2190340 (2.0 MiB)
Base address:0x2800
eth3 Link encap:Ethernet HWaddr A2:0F:3D:B8:A3:DD
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:29128 errors:0 dropped:0 overruns:0 frame:0
TX packets:18606 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:8725822 (8.3 MiB) TX bytes:2190340 (2.0 MiB)
Base address:0x2800
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:2 errors:0 dropped:0 overruns:0 frame:0
TX packets:2 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:160 (160.0 B) TX bytes:160 (160.0 B)
tap0 Link encap:Ethernet HWaddr FE:FD:00:00:00:00
UP BROADCAST RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:5
wlan0 Link encap:Ethernet HWaddr 00:0F:3D:B8:A3:DE
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:4029 errors:0 dropped:0 overruns:0 frame:0
TX packets:14497 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:396560 (387.2 KiB) TX bytes:6066403 (5.7 MiB)
Configure OpenVPN bridge
- thechief
- RouterTech Team
- Posts: 12067
- Joined: Wed Feb 01, 2006 10:22 pm
- Location: England, the Centre of Africa
- Contact:
Re: Configure OpenVPN bridge
You may want to ask this on the openvpn forums.
The Chief: Be sure to read the Firmware FAQ and do a Forum Search before posting!
No support via PM. Ask all questions on the open forum.
No support via PM. Ask all questions on the open forum.