Hi,
I have a XaVi 5258 with 4 port ethernet and 2 RJ11 for VoIP. The VoIP chips is internaly in the modem. Anyone know if router tech supports this?
/Regards J
XaVi 5258 ¤ port ethernet Wireless and VoIP 2 RJ11 on modem
Have you tried running the RUC to see if the router is compatible? See viewtopic.php?t=1062
As far as I am aware the RT firmware does not have support for VoIP as this is not a normal feature for Class II routers as defined on this site. It sounds like your router might be closer to the Billion 7402VGP that I used to use.
As far as I am aware the RT firmware does not have support for VoIP as this is not a normal feature for Class II routers as defined on this site. It sounds like your router might be closer to the Billion 7402VGP that I used to use.
We learn something every day, and lots of times it’s that what we learned the day before was wrong.
—Bill Vaughan
—Bill Vaughan
My guess would be that you can't. The RT firmware does not include support for VoIP features in the router (although it will allow VoIP using devices etc).thrud71 wrote:Im already running v2.5 on the modem. DSL are working but i was woundering about how to implement the Voice support.
We learn something every day, and lots of times it’s that what we learned the day before was wrong.
—Bill Vaughan
—Bill Vaughan
I'm in the same boat. I also need the firmware for the modem that Ostry50 mentions.Ostry50 wrote:I'm running the last one 2.9 firmware for TNEDW1350 Wireless Voip card. It works perfectly except VoIP functions. Btw, maybe someone has original firmware for this modem? I,m desperately looking for it. The firmware can be also extracted from working modem usin tftp method as mtd4 block.
I'd be very grateful if anyone could supply this information.
thanks,
jim
- thechief
- RouterTech Team
- Posts: 12067
- Joined: Wed Feb 01, 2006 10:22 pm
- Location: England, the Centre of Africa
- Contact:
Have you tried the manufacturer's website?
The Chief: Be sure to read the Firmware FAQ and do a Forum Search before posting!
No support via PM. Ask all questions on the open forum.
No support via PM. Ask all questions on the open forum.