Routertech 2.9 UPnP Issue?

An area specifically for port forwarding, firewalls and other (on-line) security related issues.
Post Reply
adhoniran
Newbie
Newbie
Posts: 5
Joined: Fri May 01, 2009 12:52 pm

Routertech 2.9 UPnP Issue?

Post by adhoniran » Mon Jul 13, 2009 6:14 pm

Hello everyone, I have a D-Link G604T running Routertech 2.9 with UPnP enabled. I am using eMule on Windows box and aMule on Linux box, but UPnP never mapping automatically. Both softwares always connecting with LOW ID.

Manually configuring the mapping at Windows box (using UPnP device configuration at Windows Network Properties) the translation works and I get High ID normally, but I can't to configure each mapping manually for each desktop.

I need UPnP configuring the mapping automatically, like D-Link firmware does.

* I'm sorry, my english is so poor.
mstombs
RouterTech Team
RouterTech Team
Posts: 3753
Joined: Wed Jan 10, 2007 11:54 pm

Post by mstombs » Mon Jul 13, 2009 7:23 pm

RouterTech uses the well respected miniupnpd daemon, but it appears others also have issues with varieties of mules:- for example

http://miniupnp.tuxfamily.org/forum/vie ... sc&start=0

is the "MorphXT mod for eMule" an option?
adhoniran
Newbie
Newbie
Posts: 5
Joined: Fri May 01, 2009 12:52 pm

MorphXT mod

Post by adhoniran » Mon Jul 13, 2009 8:45 pm

mstombs wrote: is the "MorphXT mod for eMule" an option?

I tried using Dreamule (an excelent brazilian mod) at http://www.dreamule.org/ingles/emule.html

Using MorphXT is able to work?
Post Reply