Help with NAT'ng!!!! Newbie...

An area specifically for port forwarding, firewalls and other (on-line) security related issues.
Post Reply
Neena22476
Newbie
Newbie
Posts: 1
Joined: Wed May 08, 2013 12:00 am

Help with NAT'ng!!!! Newbie...

Post by Neena22476 » Wed May 08, 2013 1:47 am

Good Evening; this is my first official post... :shock:
Here's the Scenario.... Interfacing with an external company....

Company A's WAN Address = 64.132.12.146
Company B's WAN Address = 316.403.70.10

The Company B's asked me to setup a 'one to one' NAT of 16.0.203.15/32 (translate to 192.168.0.2)... Their Network should be 256.2021.193/28

Issue: Router is a Netgear FVX538; not good interface with settings... I am not 100% sure if I should build outbound rules (only place I see any "NAT" reference) or how to handle it....
We will be sending them information and they will be sending information back on certain 'ports' ....
ANY Help would be GREAT.....

Here's Link to NetGear's reference manual; http://documentation.netgear.com/fvx538 ... /index.htm

I know it's best to read it; and I have... I think I am just not sure how to set it right.....
Post Reply