RouterTech Firmware 2.97 Discussion

All about firmwares for routers. Support for RouterTech firmwares is here too.
Post Reply
User avatar
thechief
RouterTech Team
RouterTech Team
Posts: 12064
Joined: Wed Feb 01, 2006 10:22 pm
Location: England, the Centre of Africa
Contact:

Re: RouterTech Firmware 2.97 Discussion

Post by thechief » Wed Aug 17, 2016 8:31 am

You're welcome :-)
The Chief: :afro: Be sure to read the Firmware FAQ and do a Forum Search before posting!
No support via PM. Ask all questions on the open forum.
leosedf
Newbie
Newbie
Posts: 5
Joined: Mon Aug 22, 2016 5:34 pm

Re: RouterTech Firmware 2.97 Discussion

Post by leosedf » Thu Aug 25, 2016 2:04 pm

Hello! I'm having a few problems some times with my WAG200G.

It randomly disconnects (probably not the DSL because it shows normal uptime) , the pc's cannot connect to any site and i cannot log on to my router. After 3-4 min it comes back and everything works normally, some times it does that every 10 minutes and the whole internet access stops including the router login page.


Do you guys have any idea what i should check? I have attached a diagnostic and a system log (ignore the dates) and i cleared it now just in case i gather more data.


Regards
User avatar
thechief
RouterTech Team
RouterTech Team
Posts: 12064
Joined: Wed Feb 01, 2006 10:22 pm
Location: England, the Centre of Africa
Contact:

Re: RouterTech Firmware 2.97 Discussion

Post by thechief » Thu Aug 25, 2016 8:39 pm

I can't see anything that is obviously wrong from what you've posted, but it seems that something is intermittently waiting for a timeout. A bit of history of how you got here would be useful.

PS: I would leave off clearing logs and dmesg buffers until the issue is sorted.
PSS: the stuff you posted contains too much private information; you need to remove it, and only post what you want the whole world to see.
The Chief: :afro: Be sure to read the Firmware FAQ and do a Forum Search before posting!
No support via PM. Ask all questions on the open forum.
leosedf
Newbie
Newbie
Posts: 5
Joined: Mon Aug 22, 2016 5:34 pm

Re: RouterTech Firmware 2.97 Discussion

Post by leosedf » Fri Aug 26, 2016 8:54 am

Hello!
Thank you for your reply.

Well it seems i cannot edit the post so if you can delete the attachments now it's ok.

The same day i changed the router i did a firmware upgrade on a radiolink i have on the router. The router is actually around 1.6km away from me. I downgraded both ptp links to see if it was the firmware that caused this on my lan. I talked with my friend on the other side and he said he hadn't any problems so i got suspicious on them.
I'll check it today how it works out and let you know.
User avatar
thechief
RouterTech Team
RouterTech Team
Posts: 12064
Joined: Wed Feb 01, 2006 10:22 pm
Location: England, the Centre of Africa
Contact:

Re: RouterTech Firmware 2.97 Discussion

Post by thechief » Fri Aug 26, 2016 11:35 am

I have deleted the attachments. I hope that I did not read you say that you upgraded the firmware wirelessly.
The Chief: :afro: Be sure to read the Firmware FAQ and do a Forum Search before posting!
No support via PM. Ask all questions on the open forum.
leosedf
Newbie
Newbie
Posts: 5
Joined: Mon Aug 22, 2016 5:34 pm

Re: RouterTech Firmware 2.97 Discussion

Post by leosedf » Fri Aug 26, 2016 5:23 pm

Haha! No i'm not that stupid lol. It was a spare wag200g i had. When it was ready i just went there and replaced routers leaving the old there as a backup if something goes wrong i would call and replace it.

The problem seemed to be the wireless connection. I fixed the link and it works fine so far. Bad decision to upgrade the link the same day.
Although i re upgraded the links with the same firmware but i changed some settings on the DFS etc and they are also stable and fast.

Thank's for the delete :)

I have a few routers more (like TG784 and others) i have to check if some ones are compatible and install routertech on them too (fun with bricking :mrgreen: )
User avatar
thechief
RouterTech Team
RouterTech Team
Posts: 12064
Joined: Wed Feb 01, 2006 10:22 pm
Location: England, the Centre of Africa
Contact:

Re: RouterTech Firmware 2.97 Discussion

Post by thechief » Fri Aug 26, 2016 6:34 pm

Have fun! :-)
The Chief: :afro: Be sure to read the Firmware FAQ and do a Forum Search before posting!
No support via PM. Ask all questions on the open forum.
User avatar
mysticalos
Experienced
Experienced
Posts: 237
Joined: Sun Feb 25, 2007 11:46 pm
Location: Georgia, USA
Contact:

Re: RouterTech Firmware 2.97 Discussion

Post by mysticalos » Mon Jun 05, 2017 10:02 pm

I'm sure answer is no but figured I'd ask. Are there any Gbond modems that routertech firmware supports?
User avatar
thechief
RouterTech Team
RouterTech Team
Posts: 12064
Joined: Wed Feb 01, 2006 10:22 pm
Location: England, the Centre of Africa
Contact:

Re: RouterTech Firmware 2.97 Discussion

Post by thechief » Tue Jun 06, 2017 5:30 am

If it is not AR7, then the answer is always "No".
The Chief: :afro: Be sure to read the Firmware FAQ and do a Forum Search before posting!
No support via PM. Ask all questions on the open forum.
linuxking
Newbie
Newbie
Posts: 2
Joined: Thu Feb 16, 2017 10:37 am

Re: RouterTech Firmware 2.97 Discussion

Post by linuxking » Wed Nov 14, 2018 9:42 pm

The compatibility list for router-tech 2.97 shows the DSL-524T A1G as "fully compatible"; But I'm having problems ... and I'm not sure it really is compatible.

I noted these posts after finding out that I have a ADM6996M chip, which says I should still be able to use the modem.
viewtopic.php?f=3&t=5229&p=52094&hilit=ADM6996M#p52094
viewtopic.php?f=3&t=5203&p=52023&hilit=ADM6996M#p52023

So, I bought the modem surplus ... and several; but they all misbehave the same.

When I flash routertech 2.97 (adam2 bootloader 4M version) onto any modem, it doesn't allow the regrouping of the ethernet ports without hanging.
I tried the routertech upgrade function to re-flash the firmware and reset the firmware environment to factory defaults, etc, but none of these fixes the problem.
I'm sure the flash memory is fine; and I have no problem running the D-Link original software after re-flashing; so it doesn't appear to be bad memory blocks.
I also changed out the two notorious capacitors in the DSL-524T, which noticibly decreased the dropped TCP packets of the modem.
Upgrading from 100uF 25V, to 220uF 63V decreased the delay time to sub-millisecond from 10's of milliseconds, with no lost packets, ever.
The modems work the same whether from a 12VAC power supply or a 9VAC power supply, so I don't think the power supply transformer or capacitors are causing the firmware failure.

But, I still can't get the firmware to allow me to change which LAN group the ethernet ports are in. The modem hangs every time I try to "add" an ethernet port to a new group.
Is there a way to verify that the ADM6996M chip is in compatibility mode? (none of the threads discuss how to tell, and I've been searching dilligently. )

Secondly, when I look at diagnostics ... I discovered something disturbing; in firmware 2.97, the file /proc/sys/dev/adam2/environment is empty.
When I run the command "ls /proc/sys/dev/" I see adam2 listed, but when I do "ls /proc/sys/dev/adam2" is empty of any files.

That suggests the adam2 kernel module for /proc is missing, or malfunctioning; because the environment variables do exist.
I tried to cat /dev/ticfg and received an Input/output error, bolstering my suspicion that the kernel is missing a driver.
Then I looked for /etc/config.xml to see if it exists, and it doesn't.

So, the adam2 version of the routertech firmware doesn't have any way to read the environment variables...
Did routertech accidentally upload a broken version of 2.97 adam firmware to the forums?

I double checked to make sure I didn't download the PSP firmware by mistake, and I downloaded:
RouterTech_3.6.0D_20120130_2.97_AR7RD-4Ports_Adam2-4mb-flash_firmware.upgrade.img
The "Tools->Diagnostic" menu, shows the same thing (adam2) ... Therefore, I flashed the correct firmware image.

But as you can see in the rest of the diagnostics, anything to do with defragmentation or environment variables is broken or missing.
So, I think there's something wrong with the adam2 4MB release of routertech 2.97.

Code: Select all

ROUTERTECH SYSTEM DIAGNOSTICS

Client browser information
Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/70.0.3538.67 Safari/537.36
You might have problems with Chrome. Use Firefox instead.

Router operating system version
Linux version 2.4.17_mvl21-malta-mips_fp_le (developers at RouterTech dot Org) #1 Mon Jan 30 22:47:12 GMT 2012

Firmware version information
BUILD=RouterTech_3.6.0D_20120130_2.97
VERSION=3.6.0D-RouterTech-4P-Adam2
BOARD=AR7RD
TARGET=Adam2-4mb-flash
FSSTAMP=20120130225053
ROHS=0

PSP version information

Linux OS DSL-PSPOhioL version 4.5.0.5 Best and Final on BasePSP Version 5.7.6.12  Jan 30 2012 22:48:12 
Avalanche SOC Version: 0x220005 operating in cached, write back, write allocate mode
Cpu Frequency:150 MHZ
System Bus frequency: 125 MHZ


Driver version information
Core Logic version: 3.6.0D
Texas Instruments CPMAC driver version: 1.5
Texas Instruments CPMAC HAL version: CPMAC 01.07.08 Jan 30 2012 22:47:23
ATM Driver version:[7.05.01.00]
DSL HAL version: [7.05.01.00]
DSP Datapump version: [7.05.01.00] Annex A
SAR HAL version: [01.07.2c]
PDSP Firmware version:[0.54]
Chipset ID: [7300/7300A]

Modem Modulation Information
NO_MODE			0x0
ADSL_G.dmt			0x3
ADSL_G.lite			0x4
ADSL_G.dmt.bis			0x8
ADSL_G.dmt.bis_DELT			0x9
ADSL_2plus			0x10
ADSL_2plus_DELT			0x11
ADSL_re-adsl			0x20
ADSL_re-adsl_DELT			0x21
ADSL_ANSI_T1.413			0x2
MULTI_MODE			0x1
ADSL_G.dmt.bis_AnxI			0x0
ADSL_G.dmt.bis_AnxJ			0x0
ADSL_G.dmt.bis_AnxM			0x400
ADSL_2plus_AnxI			0x0
ADSL_2plus_AnxJ			0x0
ADSL_2plus_AnxM			0x2000
G.shdsl			0x0
IDSL			0x0
HDSL			0x0
SDSL			0x0
VDSL			0x0

System environment (/proc/sys/dev/adam2/environment)

CPU information
processor		: 0
cpu model		: MIPS 4KEc V4.8
BogoMIPS		: 149.91
wait instruction	: no
microsecond timers	: yes
extra interrupt vector	: yes
hardware watchpoint	: yes
VCED exceptions		: not available
VCEI exceptions		: not available

Memory (RAM) information
        total:    used:    free:  shared: buffers:  cached:
Mem:  14536704 10080256  4456448        0  1306624  4255744
Swap:        0        0        0
MemTotal:        14196 kB
MemFree:          4352 kB
MemShared:           0 kB
Buffers:          1276 kB
Cached:           4156 kB
SwapCached:          0 kB
Active:           1828 kB
Inactive:         4980 kB
HighTotal:           0 kB
HighFree:            0 kB
LowTotal:        14196 kB
LowFree:          4352 kB
SwapTotal:           0 kB
SwapFree:            0 kB

Flash memory (chip) information
Flash_type=AMD; Manufacturer=SAMSUNG.
Manufacturer_ID=0x00EC; Chip_ID=0x00A2; Chip_Size=0x400000; Erase_Regions=0x0002

Mount points
/dev/mtdblock/0 / squashfs ro 0 0
none /dev devfs rw 0 0
proc /proc proc rw 0 0
ramfs /var ramfs rw 0 0

Filesystems
nodev	rootfs
nodev	bdev
nodev	proc
nodev	sockfs
nodev	tmpfs
nodev	shm
nodev	pipefs
nodev	ramfs
	minix
nodev	devfs
	squashfs

MTD
dev:    size   erasesize  name
mtd0: 00362000 00010000 "mtd0"

Kernel modules
tiatm                 138672   0

Interrupts
  7:    56741   R4000 timer/counter [MIPS interrupt]
  8:        0   unified secondary [hw0 (Avalanche Primary)]
 15:      219   serial [hw0 (Avalanche Primary)]
 23:        0 + SAR  [hw0 (Avalanche Primary)]
 41:    10206 + Cpmac Driver, + Cpmac Driver, + Cpmac Driver, + Cpmac Driver [hw0 (Avalanche Primary)]
 47:       11 + DSL  [hw0 (Avalanche Primary)]

Devices
Character devices:
  1 mem
  2 pty/m%d
  3 pty/s%d
  4 tts/%d
  5 cua/%d
 10 misc
108 ppp
128 ptm
136 pts/%d
162 raw

Block devices:
  7 loop
 31 mtdblock

Serial port information
serinfo:1.0 driver:5.05c revision:2001-07-08
0: uart:16550A port:A8610E00 irq:15 baud:2258 tx:3312 rx:0 RTS|DTR
1: uart:16550A port:A8610F00 irq:16 tx:0 rx:0 RTS|DTR

Processes
  PID USER       VSZ STAT COMMAND
    1 root      1056 S    init
    2 root         0 SW   [keventd]
    3 root         0 SWN  [ksoftirqd_CPU0]
    4 root         0 SW   [kswapd]
    5 root         0 SW   [bdflush]
    6 root         0 SW   [kupdated]
    7 root         0 SW   [mtdblockd]
  487 root      2300 S    /usr/sbin/mini_httpd -d /usr/www -u root -p 80 -c /c
  488 root      2100 S    /usr/bin/cm_pc
  490 root      3596 S    /usr/bin/cm_logic -m /dev/ticfg -c /etc/config.xml
  519 root      1056 S    init
  570 root       744 S    /sbin/dproxy -c /etc/resolv.conf -d
  892 root       684 S    /usr/sbin/udhcpd /var/tmp/udhcpd.conf
 1391 root      1068 S N  {diagnostics.cgi} /bin/sh diagnostics.cgi
 1392 root      2344 S    /usr/sbin/mini_httpd -d /usr/www -u root -p 80 -c /c
 1397 root      1188 S N  /usr/local/bin/diagnostics
 1398 root      1060 S N  sh -c /usr/local/bin/diagnostics.sh
 1399 root      1124 S N  {diagnostics.sh} /bin/sh /usr/local/bin/diagnostics.
 1437 root      1056 R N  /bin/ps

ADSL Modem information

AR7 DSL Modem Statistics:
--------------------------------
[DSL Modem Stats]
	US Connection Rate:	0	DS Connection Rate:	0
	DS Line Attenuation:	0	DS Margin:		0
	US Line Attenuation:	0	US Margin:		0
	US Payload :		0	DS Payload:		0
	US Superframe Cnt :	0	DS Superframe Cnt:	0
	US Transmit Power :	0	DS Transmit Power:	0
	LOS errors:		0	SEF errors:		0
	Errored Seconds:	0	Severely Err Secs:	0
	Frame mode:		0	Max Frame mode:		0
	Trained Path:		1	US Peak Cell Rate:	0
	Trained Mode:		0	Selected Mode:		1
	ATUC Vendor Code:	FFFFFFFF	ATUC Revision:	0
	Hybrid Selected:	0	Trellis:		1
	Showtime Count:		0	DS Max Attainable Bit Rate: 4294967264 kbps
	BitSwap:		1	US Max Attainable Bit Rate:	n/a
	Annex: 			Unknown	psd_mask_qualifier: 0x0000
	ATUC ghsVid:  f0 0e 3a e0 9a 31 7d aa
	T1413Vid: 00 00		T1413Rev: 00		VendorRev: 00
	ATUR ghsVid:  b5 00 54 53 54 43 00 00
	T1413Vid: 00 00	T1413Rev: 00	VendorRev: 00

	[Upstream (TX) Interleave path]
	CRC: 	0	FEC: 	0	NCD: 	0
	LCD: 	0	HEC: 	0

	[Downstream (RX) Interleave path]
	CRC: 	0	FEC: 	0	NCD: 	0
	LCD: 	0	HEC: 	0

	[Upstream (TX) Fast path]
	CRC: 	0	FEC: 	0	NCD: 	0
	LCD: 	0	HEC: 	0

	[Downstream (RX) Fast path]
	CRC: 	0	FEC: 	0	NCD: 	0
	LCD: 	0	HEC: 	0

[ATM Stats]
	[Upstream/TX]
	Good Cell Cnt:	0
	Idle Cell Cnt:	0


	[Downstream/RX)]
	Good Cell Cnt:	0
	Idle Cell Cnt:	0
	Bad Hec Cell Cnt:	0
	Overflow Dropped Cell Cnt:	0

[SAR AAL5 Stats]
	Tx PDU's:	0
	Rx PDU's:	0
	Tx Total Bytes:	0
	Rx Total Bytes:	0
	Tx Total Error Counts:	0
	Rx Total Error Counts:	0


[OAM Stats]
	Near End F5 Loop Back Count:	0
	Near End F4 Loop Back Count:	0
	Far End F5 Loop Back Count:	0
	Far End F4 Loop Back Count:	0
	SAR OAM Ping Response Drop Count=0

Modem DSL link information
IDLE
1
failTrains=1

Trained modulation: 
NO_MODE

Path mode: 
Interleaved

Network statistics
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       
tcp        0      0 0.0.0.0:2048            0.0.0.0:*               LISTEN      
tcp        0      0 0.0.0.0:www             0.0.0.0:*               LISTEN      
tcp        0      0 0.0.0.0:domain          0.0.0.0:*               LISTEN      
tcp        0      0 0.0.0.0:ftp             0.0.0.0:*               LISTEN      
tcp        0      0 0.0.0.0:ssh             0.0.0.0:*               LISTEN      
tcp        0      0 0.0.0.0:telnet          0.0.0.0:*               LISTEN      
tcp        0      0 mygateway1.AR7RD:www    192.168.1.2:40642       TIME_WAIT   
tcp        0      0 mygateway1.AR7RD:www    192.168.1.2:40686       TIME_WAIT   
tcp        0      0 mygateway1.AR7RD:www    192.168.1.2:40694       ESTABLISHED 
tcp        0      0 mygateway1.AR7RD:www    192.168.1.2:40602       TIME_WAIT   
udp        0      0 0.0.0.0:domain          0.0.0.0:*                           
udp        0      0 0.0.0.0:bootps          0.0.0.0:*                           
udp        0      0 0.0.0.0:tftp            0.0.0.0:*                           
Active UNIX domain sockets (servers and established)
Proto RefCnt Flags       Type       State         I-Node Path
unix  2      [ ]         DGRAM                       569 /var/tmp/cm_miniHttpd.ctl
unix  2      [ ]         DGRAM                       579 /var/tmp/cm_pc.ctl
unix  3      [ ]         DGRAM                       607 /dev/log
unix  2      [ ]         DGRAM                       609 /dev/klog
unix  2      [ ]         DGRAM                       593 /var/tmp/cm_logic.ctl
unix  2      [ ]         DGRAM                      1202 
unix  2      [ ]         STREAM                      565 
unix  2      [ ]         DGRAM                       564 
unix  2      [ ]         DGRAM                        25 

Iptables chains
Chain PREROUTING (policy ACCEPT 507 packets, 34992 bytes)
 pkts bytes target     prot opt in     out     source               destination         

Chain POSTROUTING (policy ACCEPT 0 packets, 0 bytes)
 pkts bytes target     prot opt in     out     source               destination         

Chain OUTPUT (policy ACCEPT 0 packets, 0 bytes)
 pkts bytes target     prot opt in     out     source               destination         

Chain INPUT (policy ACCEPT 5039 packets, 226K bytes)
 pkts bytes target     prot opt in     out     source               destination         
 4999  221K CFG        tcp  --  any    any     192.168.1.2          anywhere           tcp dpt:www Records Packet's Source Interface 

    0     0 ACCEPT     icmp --  any    any     anywhere             anywhere           icmp fragmentation-needed 
    0     0 DROP       icmp -f  any    any     anywhere             anywhere           

Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)
 pkts bytes target     prot opt in     out     source               destination         
    0     0 ACCEPT     icmp --  any    any     anywhere             anywhere           icmp fragmentation-needed 

Chain OUTPUT (policy ACCEPT 5003 packets, 584K bytes)
 pkts bytes target     prot opt in     out     source               destination         
    0     0 ACCEPT     icmp --  any    any     anywhere             anywhere           icmp fragmentation-needed 

Network interface details
br0       Link encap:Ethernet  HWaddr 00:E0:A0:A6:66:70  
          inet addr:192.168.1.1  Bcast:192.168.1.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:5584 errors:0 dropped:0 overruns:0 frame:0
          TX packets:5013 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100 
          RX bytes:297328 (290.3 KiB)  TX bytes:655991 (640.6 KiB)

br1       Link encap:Ethernet  HWaddr 00:00:00:00:00:00  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

br2       Link encap:Ethernet  HWaddr 00:00:00:00:00:00  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

eth0      Link encap:Ethernet  HWaddr 00:E0:A0:A6:66:70  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:5607 errors:0 dropped:0 overruns:0 frame:0
          TX packets:5015 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100 
          RX bytes:377092 (368.2 KiB)  TX bytes:656075 (640.6 KiB)
          Base address:0x2800 

eth1      Link encap:Ethernet  HWaddr 82:E0:A0:A6:66:70  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:5607 errors:0 dropped:0 overruns:0 frame:0
          TX packets:5015 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100 
          RX bytes:377092 (368.2 KiB)  TX bytes:656075 (640.6 KiB)
          Base address:0x2800 

eth2      Link encap:Ethernet  HWaddr 92:E0:A0:A6:66:70  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:5607 errors:0 dropped:0 overruns:0 frame:0
          TX packets:5015 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100 
          RX bytes:377092 (368.2 KiB)  TX bytes:656075 (640.6 KiB)
          Base address:0x2800 

eth3      Link encap:Ethernet  HWaddr A2:E0:A0:A6:66:70  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:5607 errors:0 dropped:0 overruns:0 frame:0
          TX packets:5015 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100 
          RX bytes:377092 (368.2 KiB)  TX bytes:656075 (640.6 KiB)
          Base address:0x2800 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)


System Log
Jan 30 22:50:26 | Valid Configuration Tree 
Jan 30 22:50:26 | NTP Polling Timer for DHCP Started succesfully. 
Jan 30 22:50:26 | DSL Polling Timer Started succesfully. 
Jan 30 22:50:26 | PSP Boot environment  Modem Modulation Change: 0x1 
Jan 30 22:50:27 | Firewall NAT service started 
Jan 30 22:50:28 | USB is disabled  
Jan 30 22:50:28 | Bridge Created: br0 
Jan 30 22:50:29 | Bridge VLAN0 add eth0 
Jan 30 22:50:29 | Bridge VLAN AUTO OFF. 
Jan 30 22:50:29 | Bridge VLAN0 add eth1 
Jan 30 22:50:29 | Bridge VLAN AUTO OFF. 
Jan 30 22:50:29 | Bridge VLAN0 add eth2 
Jan 30 22:50:29 | Bridge VLAN AUTO OFF. 
Jan 30 22:50:29 | Bridge VLAN0 add eth3 
Jan 30 22:50:29 | Bridge VLAN AUTO OFF. 
Jan 30 22:50:30 | Bridge Created: br1 
Jan 30 22:50:30 | Bridge Created: br2 
Jan 30 22:50:33 | Bridge Interface Added: eth0 
Jan 30 22:50:35 | Bridge Interface Added: eth1 
Jan 30 22:50:36 | Bridge Interface Added: eth2 
Jan 30 22:50:38 | DSL Carrier is down 
Jan 30 22:50:38 | Bridge Interface Added: eth3 
Jan 30 22:50:43 | no servers found in /etc/resolv.conf, will retry 

Miscellaneous information
RouterTech firmware release: 2.97
Connecting from: 192.168.1.1 [192.168.1.2]
Router's internal name: mygateway1.AR7RD
Linux version 2.4.17_mvl21-malta-mips_fp_le (developers at RouterTech dot Org) #1 Mon Jan 30 22:47:12 GMT 2012
BUILD=RouterTech_3.6.0D_20120130_2.97
VERSION=3.6.0D-RouterTech-4P-Adam2
BOARD=AR7RD
TARGET=Adam2-4mb-flash
FSSTAMP=20120130225053
ROHS=0
Core logic version: 3.6.0D
Boot Loader: Adam2 vN/A
ATM Driver version:[7.05.01.00]
DSL HAL version: [7.05.01.00]
DSP Datapump version: [7.05.01.00] Annex A
SAR HAL version: [01.07.2c]
PDSP Firmware version:[0.54]
Chipset ID: [7300/7300A]
Wireless: No
Ethernet ports: 4
Ethernet port 1: disconnected/inactive.
Ethernet port 2: disconnected/inactive.
Ethernet port 3: disconnected/inactive.
Ethernet port 4: disconnected/inactive.
Upstream rate (kbps):  0
Downstream rate (kbps):  0
Trained Modulation: NO_MODE
Path Mode: Interleaved
System uptime: 0hr 9min - 0 day(s), 0 hour(s), 9 minute(s), and 45 second(s) (system 87% idle)
DSL bandwidth stats (approximate):
	Downloads : 0.0000 MB
	Uploads   : 0.0000 MB
Ethernet bandwidth stats:
	Transmit: 0.6623 MB; Receive: 0.3903 MB
Line attenuation: 
	DS Line Attenuation:	0	DS Margin:		0
	US Line Attenuation:	0	US Margin:		0
Memory usage:
	In active use : 35% of 14196 kb
	Available     : 65% (9284 kb) of 14196 kb (of which 5140 kb is marked as "Inactive" and 4144 kb is free)
Environment fragmentation: 
cat: can't open '/var/tmp/env_count_diff': No such file or directory
cat: can't open '/var/tmp/num-entries.tmp': No such file or directory
sh: invalid number ''
	Fragmentation level is "" (out of 0 records). The threshold is "30".
Connection information: 
There is no successful connection to the internet.
The existing (unsuccessful) connection(s):
connection0 
Post Reply