MTNL MT 882 (RT V 2.5)- not connecting to network

All about firmwares for routers. Support for RouterTech firmwares is here too.
Rocky5
Novice
Novice
Posts: 20
Joined: Wed Jun 18, 2008 4:31 pm

Post by Rocky5 » Mon Jun 23, 2008 8:14 pm

Under PVC the connection setup is like this:-
PVC: New
VPI: 0
VCI: 32
QoS: UBR
PCR: 0
SCR: 0
MBS: 0
CDVT: 0
User avatar
Neo
RouterTech Team
RouterTech Team
Posts: 3586
Joined: Thu Jan 26, 2006 1:09 pm
Contact:

Post by Neo » Mon Jun 23, 2008 10:33 pm

I noticed that there were several other settings in the PPPoE section of your old config - I have created a fix file (see attached) which can add these settings to your current config (using the Config Fixer)

Alternatively, you may be able to get away with using the Config Fixer to 'fix' your backup config with the rt_20070129.fix file.
Attachments
rocky5-pppoe.zip
Advanced PPPoE settings fix
(1.4 KiB) Downloaded 635 times
RouterTech Team and Founding Member
Image
RouterTech Merchandise (UK)
No support via PM, please ask your questions on the forum!
Rocky5
Novice
Novice
Posts: 20
Joined: Wed Jun 18, 2008 4:31 pm

Post by Rocky5 » Tue Jun 24, 2008 7:57 am

thankyou for providing the fix file.
While attempting to fix the config.bin file I am getting the following error:-
"Error 53: File not found: zlib.dll"
Rocky5
Novice
Novice
Posts: 20
Joined: Wed Jun 18, 2008 4:31 pm

Post by Rocky5 » Tue Jun 24, 2008 9:29 am

Thankyou for the support provided till now.
Somethings come up and I have to immediately go out of town for a month.
I will definitely revert back to this forum once I am back in town.
User avatar
Neo
RouterTech Team
RouterTech Team
Posts: 3586
Joined: Thu Jan 26, 2006 1:09 pm
Contact:

Post by Neo » Tue Jun 24, 2008 1:18 pm

Rocky5 wrote:thankyou for providing the fix file.
While attempting to fix the config.bin file I am getting the following error:-
"Error 53: File not found: zlib.dll"
If you don't have the zlib.dll file on your system, you can download it from HERE ;)
Rocky5 wrote:Thankyou for the support provided till now.
You're welcome ;)
RouterTech Team and Founding Member
Image
RouterTech Merchandise (UK)
No support via PM, please ask your questions on the forum!
Rocky5
Novice
Novice
Posts: 20
Joined: Wed Jun 18, 2008 4:31 pm

Post by Rocky5 » Mon Jul 21, 2008 6:58 am

I just came back today, hooked up my router and now it is connecting without any problems. I didnt even have to use the config file sent by NEO. Before going it was not connecting and now it is connecting without changing any settings.

regards
rocky
digonto
Newbie
Newbie
Posts: 2
Joined: Sun Aug 24, 2014 7:21 am

Re: MTNL MT 882 (RT V 2.5)- not connecting to network

Post by digonto » Sun Aug 24, 2014 8:59 am

hi , i am a newbie to this forum and also firmware issues. my internet line drop every few seconds and my ISP said it is because of my Huawei SmartAX MT882a ADSL modem. it could be faulty or outsated firmware. therefore, i downloaded the latest firmware from huawei.in website, a ras file without any extension, and upgrade the modem using web interface. it showed success on the web browser but after rebooting the modem , i found the modem has no response. only the power light is solid green, no ADSL and LAN light (usually solid green). i tried every possible way but unable to connect to its bootloader. it would be highly appreciated if you please help me to fix this modem. Please note, i dont have the original firmware or backup.

i will never play with modem for sure, please fix my brand new modem.

digonto
Post Reply