RouterTech Firmware v2.7 Discussion

All about firmwares for routers. Support for RouterTech firmwares is here too.
Post Reply
Frontier
Novice
Novice
Posts: 33
Joined: Tue Jun 03, 2008 11:38 am
Location: Chios, Greece
Contact:

Post by Frontier » Wed Oct 08, 2008 1:26 pm

digitalic wrote:Something weird just happned.

I just did a firmware upgrade for my Dlink 504T from 2.6 to 2.7 using this file "routertech-ar7rd-adam2-4ports-firmware-20081005.tar.bz2" as recommended by RUC. Followed all the steps carefully, but after the upgrade completed, nothing changed at all! it still says:

Firmware version: RouterTech_3.6.0D_20080723_2.60 (20080723004809)

I used the single image firmware as recommended by RUC too, and upgraded via web browser (usual method).

EDIT: I just tried to flash it again, same results.
The web interface upgrade method is known not to work on D-Link routers; at least on my DSL-G624T.

I use the corrupt image method where I flash the router to the original D-Link firmware first and then from inside it's web interface to RouterTech firmware.

It's painful but it's the only way that works for me.
Frontier
Novice
Novice
Posts: 33
Joined: Tue Jun 03, 2008 11:38 am
Location: Chios, Greece
Contact:

Post by Frontier » Wed Oct 08, 2008 1:28 pm

thechief wrote:Some DLinks have this problem. It seems that your options are tiupgrade or pctool (v2.1). I personally prefer the pctool, but tiupgrade should be fine.
Does pctool works under Vista x64?
Xybirium
Novice
Novice
Posts: 24
Joined: Thu Oct 19, 2006 2:40 pm

Post by Xybirium » Wed Oct 08, 2008 1:54 pm

Just upgraded my Aztech DSL600ER to RT2.7 using PCTools2.3 and it seems to be working fine. :D
User avatar
Shotokan101
RouterTech Team
RouterTech Team
Posts: 4772
Joined: Thu Jan 26, 2006 3:17 pm
Location: Glasgow, Scotland

Post by Shotokan101 » Wed Oct 08, 2008 2:02 pm

Frontier wrote:
thechief wrote:
em wrote: Run "man darkstat"
Search for "Why are the graphs blank"

(it's in the "FREQUENTLY ASKED QUESTIONS" section) :)
I do not have a Un*x machine, therefor no man pages...

Trying the corrupted image technique under Vista 'bricked' the D-Link, but thankfully there was a Server 2003 machine available that helped to restore it.
See here for DARKSTAT MAN Entry :-

http://linux.die.net/man/1/darkstat
Jim

.....I'm Sorry But I Can't Do That Dave.....
ramesh
Newbie
Newbie
Posts: 9
Joined: Tue Sep 02, 2008 3:16 pm

exactly same problem upgrading dsl g604t from fw 2.6 to 2.7

Post by ramesh » Wed Oct 08, 2008 2:23 pm

I have so far attempted four times to upgrade my DSL g604t from fw version 2.6 to 2.7.

All the attempts appear to go through fine, the bar reaches 100 percent in some 3 minutes and screen displays the "Login" page at end. However, logging in just displays the same 2.6 version.

There were no problems upgrading from the original dlink fw to rt's.

I used the "routertech-ar7wrd-adam2-firmware-20081005.tar.bz2" as my
router is a wireless DLINK g604t with 4 ports.

digitalic wrote:
digitalic wrote:Something weird just happned.

I just did a firmware upgrade for my Dlink 504T from 2.6 to 2.7 using this file "routertech-ar7rd-adam2-4ports-firmware-20081005.tar.bz2" as recommended by RUC. Followed all the steps carefully, but after the upgrade completed, nothing changed at all! it still says:

Firmware version: RouterTech_3.6.0D_20080723_2.60 (20080723004809)

I used the single image firmware as recommended by RUC too, and upgraded via web browser (usual method).

EDIT: I just tried to flash it again, same results.
I'm going to try to upgrade via tiupgrade, if anyone has any other recommendations please do tell.
digitalic
Novice
Novice
Posts: 18
Joined: Mon Oct 06, 2008 3:58 am

Post by digitalic » Wed Oct 08, 2008 4:17 pm

thechief wrote:Some DLinks have this problem. It seems that your options are tiupgrade or pctool (v2.1). I personally prefer the pctool, but tiupgrade should be fine.
WARNING! tiupgrade= EPIC FAIL!

So after trying to upgrade from 2.6 to 2.7 via web and nothing changing, I thought I might give tiupgrade a try. I edited the .scp file and entred all the correct values for mtds and the new firmware image filename, and launched it and clicked next. After exactly 2 bars in the upgrade process, it gave out a Script Error: EAccessViolation error, Which needless to say bricked my router. Efforts to restore my router using tiupgrade's corrupt image mode did not work (after finally finding my router's factory default ip 192.168.1.199), and still gave the same error after 2 bars. The only thing that worked was using the Official Dlink firmware upgrade utility to flash my router via corrupt method to an old 2007 firmware, and then upgrade that VIA WEB to 2.7 RouterTech. Phew!

So far, it's running good. I think there's alot more RAM free than before (about 4MB instead of less than 2MB). I also think that it didn't want to upgrade from 2.6 to 2.7 via web before because of that. Since the single firmware image was larger than the amout of free RAM I had, it just refused to upgrade and reverted back to 2.6. I could be wrong though.

Anyways, lesson learned... tiupgrade=NOT GOOD!

EDIT: I just noticed something strange, eventhough my router is syncing at good SNR and Line Auttenation values, its detected speed is WAY too low.

Before (version 2.6)
Ds Rate (Kbps) 3047
Us Rate (Kbps) 1021
DS Margin 31
US Margin 12
DS Line Attenuation 31
US Line Attenuation 24

After (version 2.7)
Ds Rate (Kbps) 289
Us Rate (Kbps) 288
DS Margin 31
US Margin 34
DS Line Attenuation 25
US Line Attenuation 15

Needless to say, download speeds are considerably lower.
BTW; My connection is PPPoA VC-Mux.
Last edited by digitalic on Wed Oct 08, 2008 5:10 pm, edited 2 times in total.
helpdesk
Newbie
Newbie
Posts: 3
Joined: Fri Jul 11, 2008 5:51 pm

Post by helpdesk » Wed Oct 08, 2008 4:44 pm

Hey all,

Just flashed an D-link 624T to routertech 2.7 without any problems...been testing it and i came to a problem... i´m trying to set a remote access to the router and every time i set it up and put my ip it crashes and needs to be rebooted and loses my changes....so I'm unable to remote access the router...anyone with the same problem?
User avatar
SyBorg
Ex RouterTech Team
Ex RouterTech Team
Posts: 1621
Joined: Mon Apr 17, 2006 4:09 pm
Location: Berkshire
Contact:

Post by SyBorg » Wed Oct 08, 2008 5:07 pm

helpdesk wrote:Hey all,

Just flashed an D-link 624T to routertech 2.7 without any problems...been testing it and i came to a problem... i´m trying to set a remote access to the router and every time i set it up and put my ip it crashes and needs to be rebooted and loses my changes....so I'm unable to remote access the router...anyone with the same problem?
It's a specific external IP address you want to give access to? Otherwise you can specify 0.0.0.0 and subnet mask 0.0.0.0 to make any address able to access (assuming they use the right port). I assume you mean remote web access btw.
We learn something every day, and lots of times it’s that what we learned the day before was wrong.
—Bill Vaughan
mstombs
RouterTech Team
RouterTech Team
Posts: 3753
Joined: Wed Jan 10, 2007 11:54 pm

Post by mstombs » Wed Oct 08, 2008 6:04 pm

digitalic wrote: DS Line Attenuation 31
US Line Attenuation 24

DS Line Attenuation 25
US Line Attenuation 15

Needless to say, download speeds are considerably lower.
BTW; My connection is PPPoA VC-Mux.
The difference here makes it clear you have connected with a different adsl mode - make sure you have "multimode" selected, I wouldn't be surprised you've ended up in G lite or similar. The margins are also strangely high.
Last edited by mstombs on Wed Oct 08, 2008 6:06 pm, edited 1 time in total.
mstombs
RouterTech Team
RouterTech Team
Posts: 3753
Joined: Wed Jan 10, 2007 11:54 pm

Post by mstombs » Wed Oct 08, 2008 6:05 pm

helpdesk wrote:Hey all,

Just flashed an D-link 624T to routertech 2.7 without any problems...been testing it and i came to a problem... i´m trying to set a remote access to the router and every time i set it up and put my ip it crashes and needs to be rebooted and loses my changes....so I'm unable to remote access the router...anyone with the same problem?
Did you reset to defaults and enter all the details again after flashing?
mstombs
RouterTech Team
RouterTech Team
Posts: 3753
Joined: Wed Jan 10, 2007 11:54 pm

Re: exactly same problem upgrading dsl g604t from fw 2.6 to

Post by mstombs » Wed Oct 08, 2008 6:17 pm

ramesh wrote:I used the "routertech-ar7wrd-adam2-firmware-20081005.tar.bz2" as my
router is a wireless DLINK g604t with 4 ports.
I hope this is a silly question - you did expand the archive and select the single image from inside?

Low memory is one problem with web upgrades (mtd config and bootloader others), disabling everything inc wireless and usb then rebooting without telephone line connected (to stop services that only start on connection running) may help.
LinerX
Novice
Novice
Posts: 19
Joined: Sat Sep 20, 2008 6:30 am
Location: Germany

Post by LinerX » Wed Oct 08, 2008 6:48 pm

thechief wrote:As for why you are having connectivity problems, I think we need to see your connection settings before we can comment.
Hi,

Home Status:
Image

PPPoE Connection Setup:
Image


tracert to https://www.routertech.org over max. 30 hops:

Routenverfolgung zu routertech.org [193.238.80.65] über maximal 30 Abschnitte:

1 <1 ms <1 ms <1 ms mygateway1.AR7RD [192.168.1.1]
2 19 ms 13 ms 10 ms muedsl-82-207-232-001.citykom.de [82.207.232.1]

3 9 ms 9 ms 9 ms muersmb-v18.citykom.de [195.202.33.67]
4 10 ms 10 ms 10 ms 62.214.108.153
5 17 ms 16 ms 16 ms 10g-8-4.hhb002isp005.versatel.de [62.214.110.122
]
6 31 ms 33 ms 31 ms lon1ip1.versatel.de [62.214.104.66]
7 31 ms 31 ms 31 ms the-linx.blueconnex.net [195.66.224.223]
8 * * * Zeitüberschreitung der Anforderung.
9 * * * Zeitüberschreitung der Anforderung.
10 * * * Zeitüberschreitung der Anforderung.
11 * * * Zeitüberschreitung der Anforderung.
12 * * * Zeitüberschreitung der Anforderung.
13 * * * Zeitüberschreitung der Anforderung.
14 * * * Zeitüberschreitung der Anforderung.
15 * * * Zeitüberschreitung der Anforderung.
16 * * * Zeitüberschreitung der Anforderung.
17 * * * Zeitüberschreitung der Anforderung.
18 * * * Zeitüberschreitung der Anforderung.
19 * * * Zeitüberschreitung der Anforderung.
20 * * * Zeitüberschreitung der Anforderung.
21 * * * Zeitüberschreitung der Anforderung.
22 * * * Zeitüberschreitung der Anforderung.
23 * * * Zeitüberschreitung der Anforderung.
24 * * * Zeitüberschreitung der Anforderung.
25 * * * Zeitüberschreitung der Anforderung.
26 * * * Zeitüberschreitung der Anforderung.
27 * * * Zeitüberschreitung der Anforderung.
28 * * * Zeitüberschreitung der Anforderung.
29 * * * Zeitüberschreitung der Anforderung.
30 * * * Zeitüberschreitung der Anforderung.

Ablaufverfolgung beendet.
*Zeitüberschreitung der Anforderung=Timeout*

My TCP Settings:
« SpeedGuide.net TCP Analyzer Results »
Tested on: 08.10.2008 19:35
IP address: xxx.xxx.xxx.xxx

TCP options string: 020405ac0103030201010402
MSS: 1452
MTU: 1492
TCP Window: 261360 (multiple of MSS)
RWIN Scaling: 2 bits (2^2=4)
Unscaled RWIN : 65340
Recommended RWINs: 63888, 127776, 255552, 511104, 1022208
BDP limit (200ms): 10454kbps (1307KBytes/s)
BDP limit (500ms): 4182kbps (523KBytes/s)
MTU Discovery: ON
TTL: 52
Timestamps: OFF
SACKs: ON
IP ToS: 00000000 (0)

MTU Testing:
C:\Dokumente und Einstellungen\user>ping www.heise.de -f -l 1464

Ping www.heise.de [193.99.144.85] mit 1464 Bytes Daten:

Antwort von 193.99.144.85: Bytes=1464 Zeit=51ms TTL=246
Antwort von 193.99.144.85: Bytes=1464 Zeit=46ms TTL=246
Antwort von 193.99.144.85: Bytes=1464 Zeit=51ms TTL=246
Antwort von 193.99.144.85: Bytes=1464 Zeit=50ms TTL=246

Ping-Statistik für 193.99.144.85:
Pakete: Gesendet = 4, Empfangen = 4, Verloren = 0 (0% Verlust),
Ca. Zeitangaben in Millisek.:
Minimum = 46ms, Maximum = 51ms, Mittelwert = 49ms

>>You can set up your MTU to 1492<<

I will post my system Log at the next page, cause it is too long for one posting...
LinerX
Novice
Novice
Posts: 19
Joined: Sat Sep 20, 2008 6:30 am
Location: Germany

Post by LinerX » Wed Oct 08, 2008 7:16 pm

system log:

Image

Image

Image

ct 5 06:30:57 | sent [IPCP ConfAck id=0xa0 {addr xxxxxxxxxxxx}]
Oct 5 06:30:57 | local IP address xxxxxxxxxxx
Oct 5 06:30:57 | remote IP address xxxxxxxxxxxxx
Oct 5 06:30:57 | primary DNS address 62.220.18.8
Oct 5 06:30:57 | secondary DNS address 89.246.64.8
Oct 5 06:30:57 | Script /etc*/ppp/ip-up started (pid 248)
Oct 5 06:30:58 | PPPoE Connect with IP Address xxxxxxxxxxxx
Oct 5 06:30:58 | PPPoE Connection Successfully Established
Oct 5 06:30:58 | Renew PPPoE Session ID: 0x4201
Oct 5 06:30:58 | PPPoE Connect with Gateway IP Address: xxxxxxxxxxx
Oct 5 06:30:59 | Starting crond.
Oct 5 06:30:59 | dhcpfwd_ehandler event = 505
Oct 5 06:30:59 | add_list:module = dhcprelay if = ppp0
Oct 5 06:30:59 | print_list:WAN name = ppp0
Oct 5 06:30:59 | print_list:WAN pnextif = 0
Oct 5 06:30:59 | routed_ehandler : EVENT = 505 origin = pppoe-106
Oct 5 06:30:59 | dhcpfwd_ehandler event = 505
Oct 5 06:30:59 | dhcpfwd_ehandler event = 505
Oct 5 06:30:59 | dhcpfwd_ehandler event = 505
Oct 5 06:30:59 | ID = landhcps2 Event Rcvd = 505 STATE = 0
Oct 5 06:30:59 | ID = landhcps1 Event Rcvd = 505 STATE = 0
Oct 5 06:30:59 | ID = landhcps0 Event Rcvd = 505 STATE = 2
Oct 5 06:31:00 | sm_core Called, currentState = 4 , event = 1
Oct 5 06:31:00 | FWAN:fwan_evt_rep_if_configured
Oct 5 06:31:00 | dhcpfwd_ehandler event = 508
Oct 5 06:31:00 | routed_ehandler : EVENT = 508 origin = fwan-107
Oct 5 06:31:00 | EVT_GL_REPORT_NAT_STATE : origin = fwan-107
Oct 5 06:31:00 | chng_nat_opt name = ppp0 state = 1
Oct 5 06:31:00 | dhcpfwd_ehandler event = 508
Oct 5 06:31:00 | dhcpfwd_ehandler event = 508
Oct 5 06:31:00 | dhcpfwd_ehandler event = 508
Oct 5 06:31:00 | ID = landhcps2 Event Rcvd = 508 STATE = 0
Oct 5 06:31:00 | ID = landhcps1 Event Rcvd = 508 STATE = 0
Oct 5 06:31:00 | ID = landhcps0 Event Rcvd = 508 STATE = 1
Oct 5 06:31:00 | dhcpfwd_ehandler event = 505
Oct 5 06:31:00 | routed_ehandler : EVENT = 505 origin = connection1
Oct 5 06:31:00 | add_list:CHECK own=connection1 if=ppp0

addr=xxxxxxxxxxx
Oct 5 06:31:00 | checkif: connection1 already exists
Oct 5 06:31:00 | add_list:FOUND own=connection1 if=ppp0
Oct 5 06:31:00 | dhcpfwd_ehandler event = 505
Oct 5 06:31:00 | dhcpfwd_ehandler event = 505
Oct 5 06:31:00 | dhcpfwd_ehandler event = 505
Oct 5 06:31:00 | ID = landhcps2 Event Rcvd = 505 STATE = 0
Oct 5 06:31:00 | ID = landhcps1 Event Rcvd = 505 STATE = 0
Oct 5 06:31:00 | ID = landhcps0 Event Rcvd = 505 STATE = 1
Oct 5 06:31:00 | sm_core Called, currentState = 2 , event = 1
Oct 5 07:31:00 | sm_core Called, currentState = 2 , event = 4
Oct 5 07:31:00 | sm_core Called, currentState = 2 , event = 1
Oct 5 07:31:01 | sm_core Called, currentState = 1 , event = 3
Oct 5 07:31:01 |

Oct 8 19:02:49 | Querying module logic for key status/uptime_hours
Oct 8 19:02:49 | Querying module logic for key status/uptime_minutes
Oct 8 19:02:49 | Querying module sar for key status/dsl_carrier_state
Oct 8 19:02:49 | Querying module sar for key status/dsl_carrier_state
Oct 8 19:02:49 | Querying module sar for key status/dsl_us_rate
Oct 8 19:02:49 | Querying module sar for key status/dsl_ds_rate
Oct 8 19:02:49 | Querying module eth0 for key status/carrier
Oct 8 19:02:49 | Querying module encaps0 for key pppoa:status/ip
Oct 8 19:02:49 | Querying module encaps0 for key pppoa:status/uptime
Oct 8 19:02:49 | Querying module manager for key

command/connection/list_group
Oct 8 19:02:49 | Querying module manager for key

command/connection/list_group
Oct 8 19:02:49 | Querying module manager for key

command/connection/list_group
Oct 8 19:02:49 | Querying module manager for key

command/connection/list_group
Oct 8 19:02:49 | Querying module connection1 for key pppoe:status/ip
Oct 8 19:02:49 | Querying module manager for key

command/connection/list_group
Oct 8 19:02:49 | Querying module connection1 for key

pppoe:status/uptime
Oct 8 19:02:49 | Querying module lan0 for key settings/type
Oct 8 19:02:49 | Querying module lan0 for key static:settings/ip
Oct 8 19:02:49 | Querying module manager for key status/lan0/dhcps
Oct 8 19:02:49 | Querying module landhcps0 for key settings/state
Oct 8 19:02:49 | Querying module manager for key status/lan0/dhcps
Oct 8 19:02:49 | Querying module landhcps0 for key settings/state
Oct 8 19:02:49 | Querying module manager for key status/lan0/dhcps
Oct 8 19:02:49 | Querying module landhcps0 for key settings/start
Oct 8 19:02:49 | Querying module manager for key status/lan0/dhcps
Oct 8 19:02:49 | Querying module landhcps0 for key settings/state
Oct 8 19:02:49 | Querying module manager for key status/lan0/dhcps
Oct 8 19:02:49 | Querying module landhcps0 for key settings/end
Oct 8 19:02:49 | Querying module resolver for key settings/nameserver1
Oct 8 19:02:49 | Querying module resolver for key settings/nameserver2


............

after connection to pppoe:

Oct 8 19:02:49 | vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
Oct 8 19:02:49 | Commands for page ../html/home/home.js
Oct 8 19:02:49 | vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
Oct 8 19:02:49 | Commands for page ../html/js/jsl.js
Oct 8 19:02:49 | Querying module webui for key settings/debug/forms
Oct 8 19:02:49 | Querying module webui for key settings/debug/forms
Oct 8 19:02:49 | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Oct 8 19:02:49 | vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
Oct 8 19:02:49 | Commands for page ../html/js/error.js
Oct 8 19:02:49 | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Oct 8 19:02:49 | vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
Oct 8 19:02:49 | Commands for page ../html/js/encrypt.js
Oct 8 19:02:49 | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Oct 8 19:02:49 | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Oct 8 19:02:49 | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Oct 8 19:02:49 | vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
Oct 8 19:02:49 | Commands for page ../html/defs/style5/menus/menu_top.html
Oct 8 19:02:49 | Querying module manager for key command/connection/list
Oct 8 19:02:49 | Querying module routertech for key settings/banner
Oct 8 19:02:49 | Querying module routertech for key settings/banner
Oct 8 19:02:49 | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Oct 8 19:02:49 | vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
Oct 8 19:02:49 | Commands for page ../html/home/home.html
Oct 8 19:02:49 | vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
Oct 8 19:02:49 | Commands for page /etc*/RT_release
Oct 8 19:02:49 | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Oct 8 19:02:49 | vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
Oct 8 19:02:49 | Commands for page ../html/home/homedesc.html
Oct 8 19:02:49 | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Oct 8 19:02:49 | vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
Oct 8 19:02:49 | Commands for page ../html/home/statusinfo.html
Oct 8 19:02:49 | vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
Oct 8 19:02:49 | Commands for page /etc*/RT_version
Oct 8 19:02:49 | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Oct 8 19:02:49 | Querying module logic for key status/uptime_hours
Oct 8 19:02:49 | Querying module logic for key status/uptime_minutes
Oct 8 19:02:49 | Querying module sar for key status/dsl_carrier_state
Oct 8 19:02:49 | Querying module sar for key status/dsl_carrier_state
Oct 8 19:02:49 | Querying module sar for key status/dsl_us_rate
Oct 8 19:02:49 | Querying module sar for key status/dsl_ds_rate
Oct 8 19:02:49 | Querying module eth0 for key status/carrier
Oct 8 19:02:49 | Querying module encaps0 for key pppoa:status/ip
Oct 8 19:02:49 | Querying module encaps0 for key pppoa:status/uptime
Oct 8 19:02:49 | Querying module manager for key command/connection/list_group
Oct 8 19:02:49 | Querying module manager for key command/connection/list_group
Oct 8 19:02:49 | Querying module manager for key command/connection/list_group
Oct 8 19:02:49 | Querying module manager for key command/connection/list_group
Oct 8 19:02:49 | Querying module connection1 for key pppoe:status/ip
Oct 8 19:02:49 | Querying module manager for key command/connection/list_group
Oct 8 19:02:49 | Querying module connection1 for key pppoe:status/uptime
Oct 8 19:02:49 | Querying module lan0 for key settings/type
Oct 8 19:02:49 | Querying module lan0 for key static:settings/ip
Oct 8 19:02:49 | Querying module manager for key status/lan0/dhcps
Oct 8 19:02:49 | Querying module landhcps0 for key settings/state
Oct 8 19:02:49 | Querying module manager for key status/lan0/dhcps
Oct 8 19:02:49 | Querying module landhcps0 for key settings/state
Oct 8 19:02:49 | Querying module manager for key status/lan0/dhcps
Oct 8 19:02:49 | Querying module landhcps0 for key settings/start
Oct 8 19:02:49 | Querying module manager for key status/lan0/dhcps
Oct 8 19:02:49 | Querying module landhcps0 for key settings/state
Oct 8 19:02:49 | Querying module manager for key status/lan0/dhcps
Oct 8 19:02:49 | Querying module landhcps0 for key settings/end
Oct 8 19:02:49 | Querying module resolver for key settings/nameserver1
Oct 8 19:02:49 | Querying module resolver for key settings/nameserver2
Oct 8 19:02:49 | vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
Oct 8 19:02:49 | Commands for page /var/tmp/maca
Oct 8 19:02:49 | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Oct 8 19:02:49 | vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
Oct 8 19:02:49 | Commands for page /var/tmp/macc
Oct 8 19:02:49 | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Oct 8 19:02:49 | Querying module logic for key status/nspver
Oct 8 19:02:49 | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Oct 8 19:02:49 | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Oct 8 19:02:49 | vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
Oct 8 19:02:49 | Commands for page ../html/postform.frm
Oct 8 19:02:49 | vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
Oct 8 19:02:49 | Commands for page ../html/refresh.frm
Oct 8 19:02:49 | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Oct 8 19:02:49 | vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
Oct 8 19:02:49 | Commands for page ../html/home/home.frm
Oct 8 19:02:49 | Querying module ap for key settings/ssid
Oct 8 19:02:49 | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Oct 8 19:02:49 | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Oct 8 19:02:49 | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Oct 8 19:02:50 | spawned CGI process 312 for file 'cgi-bin/webcm'
Oct 8 19:02:51 | ============================================================
Oct 8 19:02:51 | GET method called
Oct 8 19:02:51 | key/value pairs submitted:
Oct 8 19:02:51 | key = |getpage|, value=|../html/defs/style5/menus/menu.html|
Oct 8 19:02:51 | key = |var:style|, value=|style5|
Oct 8 19:02:51 | key = |var:main|, value=|menu|
Oct 8 19:02:51 | key = |var:pagename|, value=|home|
Oct 8 19:02:51 | key = |var:pagetitle|, value=|Home|
Oct 8 19:02:51 | key = |var:menu|, value=|status|
Oct 8 19:02:51 | key = |var:menutitle|, value=|Status|
Oct 8 19:02:51 | ============================================================
Oct 8 19:02:51 | displaying page ../html/defs/style5/menus/menu.html
Oct 8 19:02:51 | vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
Oct 8 19:02:51 | Commands for page ../html/defs/style5/menus/menu.html
Oct 8 19:02:52 | vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
Oct 8 19:02:52 | Commands for page ../html/copyright.html
Oct 8 19:02:52 | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Oct 8 19:02:52 | Querying module logic for key status/has_wlan
Oct 8 19:02:52 | Querying module logic for key status/has_voice
Oct 8 19:02:52 | Querying module logic for key status/has_dsl
Oct 8 19:02:52 | Querying module logic for key status/has_marvell
Oct 8 19:02:52 | Querying module logic for key status/has_usb
Oct 8 19:02:52 | Querying module logic for key status/has_vlan
Oct 8 19:02:52 | vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
Oct 8 19:02:52 | Commands for page ../html/defs/style5/menus/menu.def
Oct 8 19:02:52 | Querying module webui for key settings/debug/tables
Oct 8 19:02:52 | vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
Oct 8 19:02:52 | Commands for page ../html/defs/style5/menus/menu_top.def
Oct 8 19:02:52 | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Oct 8 19:02:52 | vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
Oct 8 19:02:52 | Commands for page ../html/defs/style5/menus/menu_status.def
Oct 8 19:02:52 | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Oct 8 19:02:52 | vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
Oct 8 19:02:52 | Commands for page ../html/defs/style5/widgets.def
Oct 8 19:02:52 | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Oct 8 19:02:52 | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Oct 8 19:02:52 | vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
Oct 8 19:02:52 | Commands for page ../html/defs/style5/nsp.css
Oct 8 19:02:52 | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Oct 8 19:02:52 | vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
Oct 8 19:02:52 | Commands for page ../html/js/menu.js
Oct 8 19:02:52 | vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
Oct 8 19:02:52 | Commands for page ../html/defs/style5/menus/menu_top.js
Oct 8 19:02:52 | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Oct 8 19:02:52 | vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
Oct 8 19:02:52 | Commands for page ../html/defs/style5/menus/menu_status.js
Oct 8 19:02:52 | vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
Oct 8 19:02:52 | Commands for page ../html/defs/style5/menus/menu_logout.js
Oct 8 19:02:52 | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Oct 8 19:02:52 | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Oct 8 19:02:52 | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Oct 8 19:02:52 | vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
Oct 8 19:02:52 | Commands for page ../html/status/lib.js
Oct 8 19:02:52 | vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
Oct 8 19:02:52 | Commands for page ../html/status/home.js
Oct 8 19:02:52 | vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
Oct 8 19:02:52 | Commands for page ../html/js/jsl.js
Oct 8 19:02:52 | Querying module webui for key settings/debug/forms
Oct 8 19:02:52 | Querying module webui for key settings/debug/forms
Oct 8 19:02:52 | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Oct 8 19:02:52 | vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
Oct 8 19:02:52 | Commands for page ../html/js/error.js
Oct 8 19:02:52 | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Oct 8 19:02:52 | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Oct 8 19:02:52 | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Oct 8 19:02:52 | vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
Oct 8 19:02:52 | Commands for page ../html/defs/style5/menus/menu_top.html
Oct 8 19:02:52 | Querying module manager for key command/connection/list
Oct 8 19:02:52 | Querying module routertech for key settings/banner
Oct 8 19:02:52 | Querying module routertech for key settings/banner
Oct 8 19:02:52 | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Oct 8 19:02:52 | vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
Oct 8 19:02:52 | Commands for page ../html/defs/style5/menus/menu_status.html
Oct 8 19:02:52 | vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
Oct 8 19:02:52 | Commands for page ../html/defs/style5/menus/menu_logout.html
Oct 8 19:02:52 | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Oct 8 19:02:52 | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Oct 8 19:02:52 | vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
Oct 8 19:02:52 | Commands for page ../html/status/home.html
Oct 8 19:02:52 | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Oct 8 19:02:52 | vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
Oct 8 19:02:52 | Commands for page ../html/postform.frm
Oct 8 19:02:52 | vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
Oct 8 19:02:52 | Commands for page ../html/refresh.frm
Oct 8 19:02:52 | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Oct 8 19:02:52 | vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
Oct 8 19:02:52 | Commands for page ../html/status/home.frm
Oct 8 19:02:52 | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Oct 8 19:02:52 | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Oct 8 19:02:52 | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Oct 8 19:02:52 | spawned CGI process 317 for file 'cgi-bin/webcm'
Oct 8 19:02:54 | ============================================================
Oct 8 19:02:54 | GET method called
Oct 8 19:02:54 | key/value pairs submitted:
Oct 8 19:02:54 | key = |getpage|, value=|../html/defs/style5/menus/menu.html|
Oct 8 19:02:54 | key = |var:style|, value=|style5|
Oct 8 19:02:54 | key = |var:main|, value=|menu|
Oct 8 19:02:54 | key = |var:menu|, value=|status|
Oct 8 19:02:54 | key = |var:menutitle|, value=|Status|
Oct 8 19:02:54 | key = |var:pagename|, value=|syslog|
Oct 8 19:02:54 | key = |var:pagetitle|, value=|System Log|
Oct 8 19:02:54 | ============================================================
Oct 8 19:02:54 | displaying page ../html/defs/style5/menus/menu.html
Oct 8 19:02:54 | vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
Oct 8 19:02:54 | Commands for page ../html/defs/style5/menus/menu.html
Oct 8 19:02:54 | vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
Oct 8 19:02:54 | Commands for page ../html/copyright.html
Oct 8 19:02:54 | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Oct 8 19:02:54 | Querying module logic for key status/has_wlan
Oct 8 19:02:54 | Querying module logic for key status/has_voice
Oct 8 19:02:54 | Querying module logic for key status/has_dsl
Oct 8 19:02:54 | Querying module logic for key status/has_marvell
Oct 8 19:02:54 | Querying module logic for key status/has_usb
Oct 8 19:02:54 | Querying module logic for key status/has_vlan
Oct 8 19:02:54 | vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
Oct 8 19:02:54 | Commands for page ../html/defs/style5/menus/menu.def
Oct 8 19:02:54 | Querying module webui for key settings/debug/tables
Oct 8 19:02:54 | vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
Oct 8 19:02:54 | Commands for page ../html/defs/style5/menus/menu_top.def
Oct 8 19:02:54 | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Oct 8 19:02:54 | vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
Oct 8 19:02:54 | Commands for page ../html/defs/style5/menus/menu_status.def
Oct 8 19:02:54 | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Oct 8 19:02:54 | vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
Oct 8 19:02:54 | Commands for page ../html/defs/style5/widgets.def
Oct 8 19:02:54 | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Oct 8 19:02:54 | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Oct 8 19:02:54 | vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
Oct 8 19:02:54 | Commands for page ../html/defs/style5/nsp.css
Oct 8 19:02:54 | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Oct 8 19:02:54 | vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
Oct 8 19:02:54 | Commands for page ../html/js/menu.js
Oct 8 19:02:54 | vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
Oct 8 19:02:54 | Commands for page ../html/defs/style5/menus/menu_top.js
Oct 8 19:02:54 | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Oct 8 19:02:54 | vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
Oct 8 19:02:54 | Commands for page ../html/defs/style5/menus/menu_status.js
Oct 8 19:02:54 | vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
Oct 8 19:02:54 | Commands for page ../html/defs/style5/menus/menu_logout.js
Oct 8 19:02:54 | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Oct 8 19:02:54 | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Oct 8 19:02:54 | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Oct 8 19:02:54 | vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
Oct 8 19:02:54 | Commands for page ../html/status/lib.js
Oct 8 19:02:54 | vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
Oct 8 19:02:54 | Commands for page ../html/status/syslog.js
Oct 8 19:02:54 | vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
Oct 8 19:02:54 | Commands for page ../html/js/jsl.js
Oct 8 19:02:54 | Querying module webui for key settings/debug/forms
Oct 8 19:02:54 | Querying module webui for key settings/debug/forms
Oct 8 19:02:54 | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Oct 8 19:02:54 | vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
Oct 8 19:02:54 | Commands for page ../html/js/error.js
Oct 8 19:02:54 | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Oct 8 19:02:54 | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Oct 8 19:02:54 | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Oct 8 19:02:54 | vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
Oct 8 19:02:54 | Commands for page ../html/defs/style5/menus/menu_top.html
Oct 8 19:02:54 | Querying module manager for key command/connection/list
Oct 8 19:02:54 | Querying module routertech for key settings/banner
Oct 8 19:02:54 | Querying module routertech for key settings/banner
Oct 8 19:02:54 | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Oct 8 19:02:54 | vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
Oct 8 19:02:54 | Commands for page ../html/defs/style5/menus/menu_status.html
Oct 8 19:02:54 | vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
Oct 8 19:02:54 | Commands for page ../html/defs/style5/menus/menu_logout.html
Oct 8 19:02:54 | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Oct 8 19:02:54 | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Oct 8 19:02:54 | vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
Oct 8 19:02:54 | Commands for page ../html/status/syslog.html
Oct 8 19:02:54 | Querying module logger for key status/log



best regards, LinerX
helpdesk
Newbie
Newbie
Posts: 3
Joined: Fri Jul 11, 2008 5:51 pm

Post by helpdesk » Wed Oct 08, 2008 7:18 pm

SyBorg wrote:
helpdesk wrote:Hey all,

Just flashed an D-link 624T to routertech 2.7 without any problems...been testing it and i came to a problem... i´m trying to set a remote access to the router and every time i set it up and put my ip it crashes and needs to be rebooted and loses my changes....so I'm unable to remote access the router...anyone with the same problem?
It's a specific external IP address you want to give access to? Otherwise you can specify 0.0.0.0 and subnet mask 0.0.0.0 to make any address able to access (assuming they use the right port). I assume you mean remote web access btw.
It worked just fine...now I'm gonna put my mind into darkstat...tnks for the help
digitalic
Novice
Novice
Posts: 18
Joined: Mon Oct 06, 2008 3:58 am

Post by digitalic » Wed Oct 08, 2008 8:01 pm

mstombs wrote:
digitalic wrote: DS Line Attenuation 31
US Line Attenuation 24

DS Line Attenuation 25
US Line Attenuation 15

Needless to say, download speeds are considerably lower.
BTW; My connection is PPPoA VC-Mux.
The difference here makes it clear you have connected with a different adsl mode - make sure you have "multimode" selected, I wouldn't be surprised you've ended up in G lite or similar. The margins are also strangely high.
No, I have multimode selected, I've tried reselecting it (switching to something else then switching to multimode again) and it still syncs at 288kbps. And the REALLY strange thing is, I reverted back to my old official dlink firmware, and the router still syncs at very low speeds. Is that even possible? If it is, then how can I restore my router to exactly the way it was?
Post Reply