Multicast Rate setting in RT firmware

All about firmwares for routers. Support for RouterTech firmwares is here too.
Post Reply
bance
Newbie
Newbie
Posts: 4
Joined: Mon Jun 15, 2009 7:26 am

Multicast Rate setting in RT firmware

Post by bance » Fri Jun 26, 2009 1:08 pm

Hi,

Does anyone know if Multicast Rate could be configured in RT firmware? It is needed to make IPTV work properly.

I tried G-only mode, but the multicast rate seems still not high enough.

Thanks!
Post Reply