Aztech DSL605EW Mac Address N/A Problem
Aztech DSL605EW Mac Address N/A Problem
Hi all,
I have been using DSL605ew.i have upgreaded my aztech(modem/router/wifi) to Routertech V.2.6 and then could not use this version and recover original firmware.Up to here everything is okey but when i look at Mac adress,ethernet adress it writes N/A down.How could i fix this problem.
Thanks so much.....
I have been using DSL605ew.i have upgreaded my aztech(modem/router/wifi) to Routertech V.2.6 and then could not use this version and recover original firmware.Up to here everything is okey but when i look at Mac adress,ethernet adress it writes N/A down.How could i fix this problem.
Thanks so much.....
- thechief
- RouterTech Team
- Posts: 12067
- Joined: Wed Feb 01, 2006 10:22 pm
- Location: England, the Centre of Africa
- Contact:
Post the output of the system diagnostics (look under the Tools menu).
The Chief: Be sure to read the Firmware FAQ and do a Forum Search before posting!
No support via PM. Ask all questions on the open forum.
No support via PM. Ask all questions on the open forum.
- thechief
- RouterTech Team
- Posts: 12067
- Joined: Wed Feb 01, 2006 10:22 pm
- Location: England, the Centre of Africa
- Contact:
I see - you are not currently running RT firmware. Well, we need to see a copy of your environment. Login to the router via telnet or ssh, and supply the output of this command:
Code: Select all
cat /proc/ticfg/env
The Chief: Be sure to read the Firmware FAQ and do a Forum Search before posting!
No support via PM. Ask all questions on the open forum.
No support via PM. Ask all questions on the open forum.
BUILD_OPS 0x301
bootloaderVersion 1.4.0.4
ProductID AR7WRD
HWRevision Unknown
SerialNumber none
IPA 192.168.1.1
MAC_PORT 0
MEMSZ 0x01000000
FLASHSZ 0x00400000
MODETTY0 9600,n,8,1,hw
MODETTY1 9600,n,8,1,hw
CPUFREQ 211968000
MIPSFREQ 211968000
SYSFREQ 105984000
BOOTCFG m:f:"mtd1"
PROMPT (psbl)
mtd2 0x90000000,0x90010000
mtd3 0x90010000,0x90020000
mtd4 0x90020000,0x90400000
autopvc_enable 1
vlynq_polarity low
pppoe_relay_enabled 1
StaticBuffer 384
DSL_BIT_TMODE 1
sar_ipacemax 6
DSL_UPG_DONE 1
vcc_encaps0 0.0
vcc_encaps1 0.0
vcc_encaps2 0.0
vcc_encaps3 0.0
vcc_encaps4 0.0
vcc_encaps5 0.0
vcc_encaps6 0.0
vcc_encaps7 0.0
usb_vid 0x0451
usb_pid 0x6060
HWA_RNDIS 00:E0:A6:66:41:EB
HWA_HRNDIS 00:E0:A6:66:41:E1
NVS_TFTP_LOAD 1
mtd1 0x90020090,0x900af000
mtd0 0x900af000,0x90400000
connection0 0xee0d
connection0-mac 00-30-88-01-5f-a5
bootloaderVersion 1.4.0.4
ProductID AR7WRD
HWRevision Unknown
SerialNumber none
IPA 192.168.1.1
MAC_PORT 0
MEMSZ 0x01000000
FLASHSZ 0x00400000
MODETTY0 9600,n,8,1,hw
MODETTY1 9600,n,8,1,hw
CPUFREQ 211968000
MIPSFREQ 211968000
SYSFREQ 105984000
BOOTCFG m:f:"mtd1"
PROMPT (psbl)
mtd2 0x90000000,0x90010000
mtd3 0x90010000,0x90020000
mtd4 0x90020000,0x90400000
autopvc_enable 1
vlynq_polarity low
pppoe_relay_enabled 1
StaticBuffer 384
DSL_BIT_TMODE 1
sar_ipacemax 6
DSL_UPG_DONE 1
vcc_encaps0 0.0
vcc_encaps1 0.0
vcc_encaps2 0.0
vcc_encaps3 0.0
vcc_encaps4 0.0
vcc_encaps5 0.0
vcc_encaps6 0.0
vcc_encaps7 0.0
usb_vid 0x0451
usb_pid 0x6060
HWA_RNDIS 00:E0:A6:66:41:EB
HWA_HRNDIS 00:E0:A6:66:41:E1
NVS_TFTP_LOAD 1
mtd1 0x90020090,0x900af000
mtd0 0x900af000,0x90400000
connection0 0xee0d
connection0-mac 00-30-88-01-5f-a5
- thechief
- RouterTech Team
- Posts: 12067
- Joined: Wed Feb 01, 2006 10:22 pm
- Location: England, the Centre of Africa
- Contact:
Well, your environment is certainly missing a whole load of stuff - e.g.,
HWA_0 (which should contain the router's ethernet MAC address)
HWA_3 (which should contain the router's DSL MAC address)
And it is also missing all the WLAN_EEPROM* variables, so your wireless will probably not work.
The solution is for you to restore the environment that was saved by the RUC before you upgraded. This is one of the text files generated by the RUC, and starts with "env ...."
HWA_0 (which should contain the router's ethernet MAC address)
HWA_3 (which should contain the router's DSL MAC address)
And it is also missing all the WLAN_EEPROM* variables, so your wireless will probably not work.
The solution is for you to restore the environment that was saved by the RUC before you upgraded. This is one of the text files generated by the RUC, and starts with "env ...."
The Chief: Be sure to read the Firmware FAQ and do a Forum Search before posting!
No support via PM. Ask all questions on the open forum.
No support via PM. Ask all questions on the open forum.
- thechief
- RouterTech Team
- Posts: 12067
- Joined: Wed Feb 01, 2006 10:22 pm
- Location: England, the Centre of Africa
- Contact:
Use the Telnet scripter (viewtopic.php?t=282) to run the "env...." text file generated by the RUC as a script.
The Chief: Be sure to read the Firmware FAQ and do a Forum Search before posting!
No support via PM. Ask all questions on the open forum.
No support via PM. Ask all questions on the open forum.
- thechief
- RouterTech Team
- Posts: 12067
- Joined: Wed Feb 01, 2006 10:22 pm
- Location: England, the Centre of Africa
- Contact:
If you can connect to the router with the pctool, then you can use the pctool to run the same script. You need to read the de-bricking threads, especially this: viewtopic.php?t=335
The Chief: Be sure to read the Firmware FAQ and do a Forum Search before posting!
No support via PM. Ask all questions on the open forum.
No support via PM. Ask all questions on the open forum.
- thechief
- RouterTech Team
- Posts: 12067
- Joined: Wed Feb 01, 2006 10:22 pm
- Location: England, the Centre of Africa
- Contact:
Excellent!
The Chief: Be sure to read the Firmware FAQ and do a Forum Search before posting!
No support via PM. Ask all questions on the open forum.
No support via PM. Ask all questions on the open forum.
- thechief
- RouterTech Team
- Posts: 12067
- Joined: Wed Feb 01, 2006 10:22 pm
- Location: England, the Centre of Africa
- Contact:
Why are you concerned? If it is working as it should, then you shouldn't be too bothered.
The Chief: Be sure to read the Firmware FAQ and do a Forum Search before posting!
No support via PM. Ask all questions on the open forum.
No support via PM. Ask all questions on the open forum.