Succesfull attempt report
Router: DLink G624T, WiFi, 4 ports
Adam2 version: Adam2_Release 0.22.02_b04_Mar 10 2005
Routertech version: 2.97
Original mtds (with Adam2):
mtd0 0x90090000,0x903b0000
mtd1 0x90010090,0x90090000
mtd2 0x90000000,0x90010000
mtd3 0x903F0000,0x90400000
mtd4 0x90010000,0x903b0000
PSP bootloader used
1.4.0.8,
download/file.php?id=1596, got from the original
post by The Chief
Tools used
Putty,
PCtool 2.4 on Windows 7 x64, serial cable (not mandatory)
Procedure
I backed up everything with
RUC, then followed the steps 1->6 listed
here. The command I used at step 6 -the big and scary one
- was
Code: Select all
cat psbl_4M_16M_AMD_AR7WRD.bin > /dev/mtdblock/2
I manually set my pc's IP addres on 192.168.1.0/24 subnet (ie: 192.168.1.10, mask 255.255.255.0), then rebooted the router and opened PCtool 2.4
PCtool easily found PSP bootloader responding at 192.168.1.1, then I resumed the
previous procedure from step 14, and everything went fine. I could skip the intermediate steps because, as stated by The Chied, this PSP version kinda automates the env variables tuning.
Then, when everything was working, I tried from the GUI to restore the settings of the box before the bootloader upgrade. RUC saved a file, 181212-210556-Dlink G624T_current_config.bin, containing the settings. From the GUI, you can easily restore this file with the Update gateway button in System->Update gateway.
Again, everything went fine and my G624T is working exactly as it was doing it with Adam2, but now it's on PSP.
cheers