Hi all,
I'm trying to find the Half Bridge script that mstombs has written: viewtopic.php?f=3&t=1189
Supposedly it's included with the firmware but I've downloaded several sources and can't find it?
Any help would be greatly appreciated. I'm very interested in half bridge mode. Thanks in advance
Where to find pppHB.sh?
- thechief
- RouterTech Team
- Posts: 12067
- Joined: Wed Feb 01, 2006 10:22 pm
- Location: England, the Centre of Africa
- Contact:
Re: Where to find pppHB.sh?
/usr/local/bin/pppHB.sh
The Chief: Be sure to read the Firmware FAQ and do a Forum Search before posting!
No support via PM. Ask all questions on the open forum.
No support via PM. Ask all questions on the open forum.
Re: Where to find pppHB.sh?
I don't have one of these routers. I was actually wondering if someone could post the script.thechief wrote:/usr/local/bin/pppHB.sh
I would think that it would be provided with the source code tarballs but alas, it is not. Thanks.
Re: Where to find pppHB.sh?
Hi,
Thanks for the interest, this script is now very specific to the interactions between the RouterTech 'core-logic' and Linux OS. You will probably have found the threads on this site discussing aspects of the development, there's only a few important route and ifconfig commands - most of the rest is my obscure integration code. There's now lots of short name macros and variables to keep the size down, and minimal comments to help me remember what it was supposed to do - I'll have to find the relevant thread to recall the explanation for the "spoofed subnet"!
Do let us know if it is any use...
Thanks for the interest, this script is now very specific to the interactions between the RouterTech 'core-logic' and Linux OS. You will probably have found the threads on this site discussing aspects of the development, there's only a few important route and ifconfig commands - most of the rest is my obscure integration code. There's now lots of short name macros and variables to keep the size down, and minimal comments to help me remember what it was supposed to do - I'll have to find the relevant thread to recall the explanation for the "spoofed subnet"!
Do let us know if it is any use...
- Attachments
-
- pppHB.sh.zip
- RouterTech 2.9.1 half-bridge script
- (4.24 KiB) Downloaded 630 times
Re: Where to find pppHB.sh?
Thanks for posting the script from the firmware. I was trying to port it to the EE Osprey (Alcatel Y855) which has a modem interface is rmnet0 and bridge interface is bridge0. Another difference is its bridge is to wlan0 for WiFi rather than ethernet which I would guess is the reason the half-bridge isn't working for me, when I followed the commands in this other thread: viewtopic.php?f=3&t=1189 You were right the script was too obfuscated to figure out how to work the DHCP part but I'm glad its available anyway.