as what is listed.. my router doesnt use marvel chip.. instead, it uses realtek.. so is there any possibility that router tech firmware after flashed, cause my 4 port switch unusable?Router Upgrade Check 1.3.7 29/01/2010 15:50:36
Router IP: 192.168.1.1
CLI is needed
Description: Aztech DSL 600EW
Board type: AR7WRD
Product ID: AR7WRD
Bootloader: pspboot
RAM 16.0 MB
Flash (ROM) 4.0 MB
ADAM2: No
No default env: No
Linux version: 2.4.17_mvl21-malta-mips_fp_le
Firmware build: 080815
Firmware version: 3.7.0
Firmware stamp: 20080815172404
CPU: MIPS 4KEc V4.8
DSP: 7.02.03.00
Annex: A
/proc/wlan: Yes
/usr/sbin/wlan: Yes
TIAP: Yes
TNETW: Yes
Wireless: Yes
WIFI chip: TNETW1350A
WIFI chip conf: Yes
Ports: 4
Marvell (or Marvell like): No
NSP: #
Manufacturers: Aztech Systems Ltd, Siara Systems Inc
RNDIS: Telogy Networks Inc
HRNDIS: Telogy Networks Inc
Warning! Core Logic (NSP) could not be read. If the Core Logic version is too low you may need to upgrade to your router manufacturer's latest firmware first.
WARNING
Your router does not have a Marvell switch and so your switch may or may not be supported.
Realtek and IP175C switches are supported in the TNETW1350A firmware. Your Ethernet ports may or may not function correctly with a RouterTech firmware.
Select an AR7WRD PSPBOOT TNETW1350A 4 PORT firmware.
Latest: routertech-ar7wrd-1350A-pspboot-firmware-20100105.zip
Please read the instructions that come with the firmware files before you upgrade.
According to your current MTD values, you should be able to upgrade using a single firmware image.
is there anyone who tried flashing with it and worked?
woah! i almost forgot... this is a 605EW, but firmware said its 600EW, firmware came from Aztech Philippine Website.. and its a OEM from our ISP.
last time tried flashing it with Malaysian Firmware but that didnt work nor it wont boot, properly.. so i reflash it with our firmware from the official website..
Be sure to 