RouterTech Firmware 2.95 Discussion

All about firmwares for routers. Support for RouterTech firmwares is here too.
Locked
mstombs
RouterTech Team
RouterTech Team
Posts: 3753
Joined: Wed Jan 10, 2007 11:54 pm

Re: RouterTech Firmware 2.95 Discussion

Post by mstombs » Thu Apr 14, 2011 6:45 pm

I don't think there's much chance, think of the date of the Ti AR7 hardware, the driver source has no 'value' for those modes or Annex I/J which I have seen labelled as future elsewhere
{"NO_MODE", NO_MODE},
{"ADSL_G.dmt", OLD_TRAINING_VAL_GDMT},
{"ADSL_G.lite", GLITE_MODE},
{"ADSL_G.dmt.bis", ADSL2_MODE},
{"ADSL_G.dmt.bis_DELT", ADSL2_DELT},
{"ADSL_2plus", ADSL2_PLUS},
{"ADSL_2plus_DELT", ADSL2_PLUS_DELT},
{"ADSL_re-adsl", READSL_MODE},
{"ADSL_re-adsl_DELT", READSL_PLUS_DELT},
{"ADSL_ANSI_T1.413", OLD_TRAINING_VAL_T1413},
{"MULTI_MODE", OLD_TRAINING_VAL_MMODE},
{"ADSL_G.dmt.bis_AnxI", 0}, // ADSL2 AnxI 0x0100
{"ADSL_G.dmt.bis_AnxJ", 0}, // ADSL2 AnxJ 0x0200
{"ADSL_G.dmt.bis_AnxM", ADSL2_ANNEX_M}, // ADSL2 AnxM 0x0400
{"ADSL_2plus_AnxI", 0}, // ADSL2+ AnxI 0x0800
{"ADSL_2plus_AnxJ", 0}, // ADSL2+ AnxJ 0x1000
{"ADSL_2plus_AnxM", ADSL2_PLUS_ANNEX_M}, // ADSL2+ AnxM 0x2000
{"G.shdsl", 0},
{"IDSL", 0},
{"HDSL", 0},
{"SDSL", 0},
{"VDSL", 0}
If this is confirmed we should try to remove those options from the web interface!
twonky
Newbie
Newbie
Posts: 1
Joined: Mon May 10, 2010 4:50 pm

Re: RouterTech Firmware 2.95 Discussion

Post by twonky » Tue Apr 26, 2011 9:41 pm

Hi guys,
I just upgraded another g624t, my last one was given to Bro-in-law on the old 2.93 f/w. Did all the usual stuff RUC etc got the newest f/w from Dlink and put that on, same as the other one, then upgraded to 2.94 by accident as I wanted 2.95. No problem, just get the correct file this time and update the gateway from within 2.94, all went ok, router rebooted and I logged in, the version is still 2.94 NOT 2.95. The 2nd file I d/l is:-RouterTech_3.6.0D_20110103_2.95_AR7WRD_Adam2_firmware.upgrade.img. BTW it still works ok anyway on 2.94, I was wondering if it was a typo :roll:
User avatar
thechief
RouterTech Team
RouterTech Team
Posts: 12064
Joined: Wed Feb 01, 2006 10:22 pm
Location: England, the Centre of Africa
Contact:

Re: RouterTech Firmware 2.95 Discussion

Post by thechief » Tue Apr 26, 2011 9:58 pm

twonky wrote:Hi guys,
I just upgraded another g624t, my last one was given to Bro-in-law on the old 2.93 f/w. Did all the usual stuff RUC etc got the newest f/w from Dlink and put that on, same as the other one, then upgraded to 2.94 by accident as I wanted 2.95. No problem, just get the correct file this time and update the gateway from within 2.94, all went ok, router rebooted and I logged in, the version is still 2.94 NOT 2.95. The 2nd file I d/l is:-RouterTech_3.6.0D_20110103_2.95_AR7WRD_Adam2_firmware.upgrade.img. BTW it still works ok anyway on 2.94, I was wondering if it was a typo :roll:
firmware-faq/#Adam2-upgrade-problems
The Chief: :afro: Be sure to read the Firmware FAQ and do a Forum Search before posting!
No support via PM. Ask all questions on the open forum.
fantomax
Newbie
Newbie
Posts: 5
Joined: Tue May 13, 2008 12:47 pm

Re: RouterTech Firmware 2.95 Discussion

Post by fantomax » Fri Apr 29, 2011 7:42 pm

Led problem on D-Link 524T. I used the 4Mb firmware and all it's ok.
In the past I used the file 604t.conf for led configuration.
Now there is'nt this file in the new firmware and the led don't have the correct status.
I tested all led conf in the image but nothing..... Ok i can put the firmware of 624T (Wireless) that have this file (I tested and it's OK) but i want a correct firmware for my hardware.
There is some solution???
The led file it's very very little it's possible to have in the next release???
It's possibile copy this file in the router and use setenv to set the conf??? I tried copy in /var but at the reboot the file is deleted.

Thanx for the great work
FantoMax
User avatar
thechief
RouterTech Team
RouterTech Team
Posts: 12064
Joined: Wed Feb 01, 2006 10:22 pm
Location: England, the Centre of Africa
Contact:

Re: RouterTech Firmware 2.95 Discussion

Post by thechief » Fri Apr 29, 2011 9:03 pm

Are you saying that led.524t.conf is not working correctly?
The Chief: :afro: Be sure to read the Firmware FAQ and do a Forum Search before posting!
No support via PM. Ask all questions on the open forum.
fantomax
Newbie
Newbie
Posts: 5
Joined: Tue May 13, 2008 12:47 pm

Re: RouterTech Firmware 2.95 Discussion

Post by fantomax » Sat Apr 30, 2011 10:07 pm

thechief wrote:Are you saying that led.524t.conf is not working correctly?
Example
With original firmware from d-link or with 604t.conf:
1) the ADSL led BLINK when the router detect the carrier and do the login
2) the ADSL led TURN ON (FIXED) if there is INTERNET OK.

With 524t.conf:
1) the ADSL led TURN OFF
2) the ADSL led BLINK

So it's not a problem, but I like the first indication.
Thanx
FantoMax
User avatar
thechief
RouterTech Team
RouterTech Team
Posts: 12064
Joined: Wed Feb 01, 2006 10:22 pm
Location: England, the Centre of Africa
Contact:

Re: RouterTech Firmware 2.95 Discussion

Post by thechief » Mon May 02, 2011 11:40 am

Ok, led.g604t will be added to v2.96.
The Chief: :afro: Be sure to read the Firmware FAQ and do a Forum Search before posting!
No support via PM. Ask all questions on the open forum.
Locked