RouterTech Firmware 2.95 Discussion

All about firmwares for routers. Support for RouterTech firmwares is here too.
Locked
User avatar
thechief
RouterTech Team
RouterTech Team
Posts: 12066
Joined: Wed Feb 01, 2006 10:22 pm
Location: England, the Centre of Africa
Contact:

Re: RouterTech Firmware 2.95 Discussion

Post by thechief » Sat Jan 15, 2011 12:44 am

benobi wrote:tried all...

restored to factory default, telneted and used command : 'setenv DEFRAG DEFRAG'.
Checked all via command : '/usr/local/bin/check_env'
Rebooted ....upgraded via WEB to 2.95 ...and still the same....always see 2.94 :(

my actual firmware : RouterTech_3.6.0D_20100818_2.94 (Adam2-lite-dsp70; 20100818103446)

Do not know what to do now :(

Plz Help
Well, it should work. However, I would check the mtd values and compare them with the mtd logs in v2.95. You need to have the correct settings for the mtd partitions. And you can try upgrading with the pctool. But it seems that there might be a fundamental problem. Without seeing the system diagnostics, I can't comment on that.
The Chief: :afro: Be sure to read the Firmware FAQ and do a Forum Search before posting!
No support via PM. Ask all questions on the open forum.
hihani
Newbie
Newbie
Posts: 2
Joined: Mon Nov 15, 2010 2:15 am

Re: RouterTech Firmware 2.95 Discussion

Post by hihani » Sat Jan 15, 2011 12:46 am

Same thing with my D-link DSL-584T.
Upgraded it via "PC-Tool" without problem.

Chief was quicker.
benobi
Novice
Novice
Posts: 16
Joined: Wed Aug 18, 2010 8:08 pm

Re: RouterTech Firmware 2.95 Discussion

Post by benobi » Sat Jan 15, 2011 1:05 am

thechief wrote:
benobi wrote:tried all...

restored to factory default, telneted and used command : 'setenv DEFRAG DEFRAG'.
Checked all via command : '/usr/local/bin/check_env'
Rebooted ....upgraded via WEB to 2.95 ...and still the same....always see 2.94 :(

my actual firmware : RouterTech_3.6.0D_20100818_2.94 (Adam2-lite-dsp70; 20100818103446)

Do not know what to do now :(

Plz Help
Well, it should work. However, I would check the mtd values and compare them with the mtd logs in v2.95. You need to have the correct settings for the mtd partitions. And you can try upgrading with the pctool. But it seems that there might be a fundamental problem. Without seeing the system diagnostics, I can't comment on that.

Here is all info :


ROUTERTECH SYSTEM DIAGNOSTICS

Operating system version
Linux version 2.4.17_mvl21-malta-mips_fp_le (developers@RouterTech.Org) #1 Wed Aug 18 10:31:58 BST 2010

Firmware version information
BUILD=RouterTech_3.6.0D_20100818_2.94
VERSION=3.6.0D-RouterTech-1P-Adam2
BOARD=AR7RD
TARGET=Adam2-lite-dsp70
FSSTAMP=20100818103446

PSP version information

Linux OS DSL-PSPOhioL version 4.5.0.5 Best and Final on BasePSP Version 5.7.6.12 Aug 18 2010 10:32:57
Avalanche SOC Version: 0x20005 operating in cached, write back, write allocate mode
Cpu Frequency:150 MHZ
System Bus frequency: 125 MHZ


Driver version information
Core Logic version: 3.6.0D
Texas Instruments CPMAC driver version: 1.5
Texas Instruments CPMAC HAL version: CPMAC 01.07.08 Aug 18 2010 10:32:09
ATM Driver version:[7.00.01.00]
DSL HAL version: [7.00.01.00]
DSP Datapump version: [7.00.04.00] Annex A
SAR HAL version: [01.07.2c]
PDSP Firmware version:[0.54]
Chipset ID: [7300/7300A]

Modem Modulation Information
NO_MODE 0x0
ADSL_G.dmt 0x3
ADSL_G.lite 0x4
ADSL_G.dmt.bis 0x8
ADSL_G.dmt.bis_DELT 0x9
ADSL_2plus 0x10
ADSL_2plus_DELT 0x11
ADSL_re-adsl 0x20
ADSL_re-adsl_DELT 0x21
ADSL_ANSI_T1.413 0x2
MULTI_MODE 0x1
ADSL_G.dmt.bis_AnxI 0x0
ADSL_G.dmt.bis_AnxJ 0x0
ADSL_G.dmt.bis_AnxM 0x400
ADSL_2plus_AnxI 0x0
ADSL_2plus_AnxJ 0x0
ADSL_2plus_AnxM 0x2000
G.shdsl 0x0
IDSL 0x0
HDSL 0x0
SDSL 0x0
VDSL 0x0

System environment (/proc/sys/dev/adam2/environment)

Adam2_Release 0.22.02_b03_Mar 9 2005
autoload 1
bootloaderVersion 0.22.02
bootserport tty0
connection1 0x6000
cpufrequency 150000000
firstfreeaddress 0x9401d888
flashsize 0x00200000
HWA_HRNDIS 00:E0:A6:66:41:E1
HWA_RNDIS 00:E0:A6:66:41:EB
HWRevision Unknown
led_conf led.dsl300t
maca 00:11:95:B7:DD:06
memsize 0x00800000
modetty0 38400,n,8,1,hw
modetty1 38400,n,8,1,hw
modulation 0x10
mtd0 0x90089000,0x901f0000
mtd1 0x90010090,0x90089000
mtd2 0x90000000,0x90010000
mtd3 0x901f0000,0x90200000
my_ipaddress 192.168.1.199
ProductID AR7DB
prompt Adam2_AR7DB
req_fullrate_freq 125000000
SerialNumber none
sysfrequency 125000000
usb_board_mac 00:0D:88:CB:A7:73
usb_man N/A
usb_pid 0x0
usb_prod N/A
usb_rndis_mac 00:0D:88:CB:A7:74
usb_serial 1234567890
usb_vid 0x0
vcc_encaps0 0.0
vcc_encaps1 0.0
vcc_encaps2 0.0
vcc_encaps3 0.0
vcc_encaps4 0.0
vcc_encaps5 0.0
vcc_encaps6 0.0
vcc_encaps7 0.0

CPU information
processor : 0
cpu model : MIPS 4KEc V4.8
BogoMIPS : 149.91
wait instruction : no
microsecond timers : yes
extra interrupt vector : yes
hardware watchpoint : yes
VCED exceptions : not available
VCEI exceptions : not available

Memory (RAM) information
total: used: free: shared: buffers: cached:
Mem: 6361088 6098944 262144 0 135168 1417216
Swap: 0 0 0
MemTotal: 6212 kB
MemFree: 256 kB
MemShared: 0 kB
Buffers: 132 kB
Cached: 1384 kB
SwapCached: 0 kB
Active: 1456 kB
Inactive: 1688 kB
HighTotal: 0 kB
HighFree: 0 kB
LowTotal: 6212 kB
LowFree: 256 kB
SwapTotal: 0 kB
SwapFree: 0 kB

Flash memory (chip) information
Flash type: Intel; Manufacturer=Unknown!.
Manufacturer_ID=0x0000; Chip_ID=0x0000; Chip_Size=0x400000; Erase_Regions=0x0002

Mount points
/dev/mtdblock/0 / squashfs ro 0 0
none /dev devfs rw 0 0
proc /proc proc rw 0 0
ramfs /var ramfs rw 0 0

Filesystems
nodev rootfs
nodev bdev
nodev proc
nodev sockfs
nodev tmpfs
nodev shm
nodev pipefs
nodev ramfs
minix
nodev devfs
squashfs

MTD
dev: size erasesize name
mtd0: 00167000 00010000 "mtd0"
mtd1: 00078f70 00010000 "mtd1"
mtd2: 00010000 00002000 "mtd2"
mtd3: 00010000 00010000 "mtd3"

Kernel modules
tiatm 134664 1

Interrupts
7: 453924 R4000 timer/counter [MIPS interrupt]
8: 0 unified secondary [hw0 (Avalanche Primary)]
15: 288 serial [hw0 (Avalanche Primary)]
23: 96599 + SAR [hw0 (Avalanche Primary)]
27: 90739 + Cpmac Driver [hw0 (Avalanche Primary)]
47: 52 + DSL [hw0 (Avalanche Primary)]

Devices
Character devices:
1 mem
2 pty/m%d
3 pty/s%d
4 tts/%d
5 cua/%d
10 misc
108 ppp
128 ptm
136 pts/%d
162 raw

Block devices:
7 loop
31 mtdblock

Processes
PID USER VSZ STAT COMMAND
1 root 1000 S init
2 root 0 SW [keventd]
3 root 0 SWN [ksoftirqd_CPU0]
4 root 0 SW [kswapd]
5 root 0 SW [bdflush]
6 root 0 SW [kupdated]
7 root 0 SW [mtdblockd]
383 root 1180 S /usr/sbin/thttpd -d /usr/www -u root -p 80 -c /cgi-b
386 root 2136 S /usr/bin/cm_pc
387 root 3484 S /usr/bin/cm_logic -m /dev/ticfg -c /etc/config.xml
406 root 744 S /sbin/dproxy -c /etc/resolv.conf -d
492 root 1000 S init
572 root 2396 S /usr/sbin/pppd plugin pppoe nas0 user s1z8s1rb@bn24.
614 root 920 S /sbin/msntp -r 2 -t 5 -p 30 -s wwv.nist.gov ntp2b.mc
823 root 684 S /usr/sbin/udhcpd /var/tmp/udhcpd.conf
863 root 1008 S N /bin/sh diagnostics.cgi
864 root 1184 S /usr/sbin/thttpd -d /usr/www -u root -p 80 -c /cgi-b
868 root 628 S N /usr/local/bin/diagnostics
869 root 1004 S N sh -c /usr/local/bin/diagnostics.sh
870 root 1008 S N /bin/sh /usr/local/bin/diagnostics.sh
894 root 1000 R N /bin/ps

ADSL Modem information

AR7 DSL Modem Statistics:
--------------------------------
[DSL Modem Stats]
US Connection Rate: 1211 DS Connection Rate: 19898
DS Line Attenuation: 11 DS Margin: 12
US Line Attenuation: 7 US Margin: 5
US Payload : 6564144 DS Payload: 56089248
US Superframe Cnt : 264210 DS Superframe Cnt: 264210
US Transmit Power : 9 DS Transmit Power: 14
LOS errors: 0 SEF errors: 0
Errored Seconds: 0 Severely Err Secs: 0
Frame mode: 0 Max Frame mode: 0
Trained Path: 1 US Peak Cell Rate: 2856
Trained Mode: 16 Selected Mode: 16
ATUC Vendor Code: 4244434D ATUC Revision: 2
Hybrid Selected: 1 Trellis: 1
Showtime Count: 1 DS Max Attainable Bit Rate: 24248 kbps
BitSwap: 1 US Max Attainable Bit Rate: 1307000 bps
Annex: AnxA psd_mask_qualifier: 0x0000
ATUC ghsVid: b5 00 42 44 43 4d 61 97
T1413Vid: 00 00 T1413Rev: 00 VendorRev: 00
ATUR ghsVid: b5 00 54 53 54 43 00 00
T1413Vid: 00 00 T1413Rev: 00 VendorRev: 00

[Upstream (TX) Interleave path]
CRC: 0 FEC: 0 NCD: 0
LCD: 0 HEC: 0

[Downstream (RX) Interleave path]
CRC: 0 FEC: 0 NCD: 0
LCD: 0 HEC: 0

[Upstream (TX) Fast path]
CRC: 0 FEC: 0 NCD: 0
LCD: 0 HEC: 0

[Downstream (RX) Fast path]
CRC: 0 FEC: 0 NCD: 0
LCD: 0 HEC: 0

[ATM Stats]
[Upstream/TX]
Good Cell Cnt: 136753
Idle Cell Cnt: 12700684

Tx Packets Dropped Count: 0
Tx Bad Packets Count: 0

[Downstream/RX)]
Good Cell Cnt: 1168526
Idle Cell Cnt: 209627880
Bad Hec Cell Cnt: 0
Overflow Dropped Cell Cnt: 0
Rx Packets Dropped Count: 0
Rx Bad Packets Count: 0


[SAR AAL5 Stats]
Tx PDU's: 41739
Rx PDU's: 57225
Tx Total Bytes: 5509563
Rx Total Bytes: 55210443
Tx Total Error Counts: 0
Rx Total Error Counts: 0


[OAM Stats]
Near End F5 Loop Back Count: 0
Near End F4 Loop Back Count: 0
Far End F5 Loop Back Count: 0
Far End F4 Loop Back Count: 0
SAR OAM Ping Response Drop Count=15

Trained modulation:
ADSL_2plus

Path mode:
Interleaved

Network statistics
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 0.0.0.0:www 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:domain 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:ftp 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:ssh 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:telnet 0.0.0.0:* LISTEN
tcp 0 0 mygateway1.AR7RD:www 192.168.1.2:2842 TIME_WAIT
tcp 0 0 mygateway1.AR7RD:www 192.168.1.2:2843 TIME_WAIT
tcp 0 0 mygateway1.AR7RD:www 192.168.1.2:2849 TIME_WAIT
tcp 0 512 mygateway1.AR7RD:www 192.168.1.2:2850 ESTABLISHED
udp 0 0 0.0.0.0:domain 0.0.0.0:*
udp 0 0 0.0.0.0:bootps 0.0.0.0:*
udp 0 0 0.0.0.0:tftp 0.0.0.0:*
Active UNIX domain sockets (servers and established)
Proto RefCnt Flags Type State I-Node Path
unix 5 [ ] DGRAM 452 /dev/log
unix 2 [ ] DGRAM 454 /dev/klog
unix 2 [ ] DGRAM 425 /var/tmp/cm_pc.ctl
unix 2 [ ] DGRAM 439 /var/tmp/cm_logic.ctl
unix 2 [ ] DGRAM 1458
unix 2 [ ] DGRAM 916
unix 2 [ ] DGRAM 903
unix 2 [ ] STREAM 411
unix 2 [ ] DGRAM 410
unix 2 [ ] DGRAM 25

Iptables chains
Chain INPUT (policy ACCEPT 1314 packets, 94991 bytes)
pkts bytes target prot opt in out source destination
193 31449 ACCEPT all -- ppp0 any anywhere anywhere state RELATED,ESTABLISHED
0 0 ACCEPT icmp -- any any anywhere anywhere icmp fragmentation-needed
0 0 DROP icmp -f any any anywhere anywhere
99 5814 DROP all -- ppp0 any anywhere anywhere

Chain FORWARD (policy ACCEPT 41537 packets, 4166K bytes)
pkts bytes target prot opt in out source destination
56835 53M ACCEPT all -- ppp0 any anywhere anywhere state RELATED,ESTABLISHED
2167 104K TCPMSS tcp -- any ppp0 anywhere anywhere tcp flags:SYN,RST/SYN TCPMSS clamp to PMTU
0 0 ACCEPT icmp -- any any anywhere anywhere icmp fragmentation-needed
0 0 DROP all -- ppp0 any anywhere anywhere

Chain OUTPUT (policy ACCEPT 2413 packets, 1923K bytes)
pkts bytes target prot opt in out source destination
50 28800 ACCEPT icmp -- any any anywhere anywhere icmp fragmentation-needed
27 6286 DROP icmp -- any ppp0 anywhere anywhere icmp destination-unreachable
0 0 DROP icmp -- any ppp0 anywhere anywhere state INVALID

Network interface details
br0 Link encap:Ethernet HWaddr 00:11:95:B7:DD:06
inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:43314 errors:0 dropped:0 overruns:0 frame:0
TX packets:59213 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:4536046 (4.3 MiB) TX bytes:56113930 (53.5 MiB)

br1 Link encap:Ethernet HWaddr 00:00:00:00:00:00
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

br2 Link encap:Ethernet HWaddr 00:00:00:00:00:00
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

eth0 Link encap:Ethernet HWaddr 00:11:95:B7:DD:06
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:43324 errors:0 dropped:0 overruns:0 frame:0
TX packets:59213 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:5143058 (4.9 MiB) TX bytes:56113930 (53.5 MiB)

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

nas0 Link encap:Ethernet HWaddr 00:00:02:03:04:05
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:57325 errors:0 dropped:0 overruns:0 frame:0
TX packets:41836 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:53850715 (51.3 MiB) TX bytes:5519500 (5.2 MiB)

ppp0 Link encap:Point-to-Point Protocol
inet addr:87.205.158.81 P-t-P:195.114.190.150 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1400 Metric:1
RX packets:57139 errors:0 dropped:0 overruns:0 frame:0
TX packets:41756 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:53380021 (50.9 MiB) TX bytes:4180046 (3.9 MiB)


System Log
Aug 18 10:34:12 | Valid Configuration Tree
Aug 18 10:34:12 | NTP Polling Timer for DHCP Started succesfully.
Aug 18 10:34:12 | DSL Polling Timer Started succesfully.
Aug 18 10:34:12 | PSP Boot environment Modem Modulation Change: 0x10
Aug 18 10:34:12 | Firewall NAT service started
Aug 18 10:34:13 | Bridge Created: br0
Aug 18 10:34:15 | Bridge Created: br1
Aug 18 10:34:16 | Bridge Created: br2
Aug 18 10:34:18 | Bridge Interface Added: eth0
Aug 18 10:34:20 | Add Bridge Iface Error: 1
Aug 18 10:34:20 | USB is disabled
Aug 18 10:34:22 | DSL Carrier is down
Aug 18 10:34:24 | rcS not stopped by init. Stopping it ...
Aug 18 10:34:42 | DSL Carrier is up
Aug 18 10:34:42 | sar read trained mode (5)(ADSL_2plus)
Aug 18 10:34:43 | ---}}} Start of connection delayed for 6 sec
Aug 18 10:34:49 | PPPoE Launch after conn delay timeout ...
Aug 18 10:34:51 | pppd 2.4.4 started by root, uid 0
Aug 18 10:34:51 | Got connection: 6000
Aug 18 10:34:51 | New PPP_ID: 0x6000
Aug 18 10:34:51 | Saved Session ID: 0
Aug 18 10:34:51 | AC MAC address: 00-90-1a-42-5d-f0
Aug 18 10:34:51 | Connect: ppp0 {--} nas0
Aug 18 10:34:51 | PAP authentication succeeded
Aug 18 10:34:51 | local IP address 87.205.158.81
Aug 18 10:34:51 | PPPoE Connect with IP Address 87.205.158.81
Aug 18 10:34:52 | PPPoE Connection Successfully Established
Aug 18 10:34:52 | Renew PPPoE Session ID: 0x6000
Aug 18 10:34:52 | PPPoE Connect with Gateway IP Address: 195.114.190.150
Aug 18 10:34:52 | remote IP address 195.114.190.150
Aug 18 11:34:57 | primary DNS address 62.233.233.233
Aug 18 11:34:57 | secondary DNS address 87.204.204.204
Jan 14 22:48:19 | onconnectWAN: cron has been disabled in the bootloader environment.

Miscellaneous information
RouterTech firmware release: 2.94
Linux version 2.4.17_mvl21-malta-mips_fp_le (developers@RouterTech.Org) #1 Wed Aug 18 10:31:58 BST 2010
BUILD=RouterTech_3.6.0D_20100818_2.94
VERSION=3.6.0D-RouterTech-1P-Adam2
BOARD=AR7RD
TARGET=Adam2-lite-dsp70
FSSTAMP=20100818103446
Ethernet ports: 1
Core logic version: 3.6.0D
Boot Loader: Adam2 v0.22.02
ATM Driver version:[7.00.01.00]
DSL HAL version: [7.00.01.00]
DSP Datapump version: [7.00.04.00] Annex A
SAR HAL version: [01.07.2c]
PDSP Firmware version:[0.54]
Chipset ID: [7300/7300A]
Upstream rate (kbps): 1211
Downstream rate (kbps): 19898
Trained Modulation: ADSL_2plus
Path Mode: Interleaved
System uptime: 1 hr 15 min - 0 day(s), 1 hour(s), 15 minute(s), and 57 second(s) (system 97% idle)
WAN uptime: 1hr 14min 55sec
WAN IP address: 87.205.158.81
Bandwidth usage:
Downloads : 53.3616 MB
Uploads : 5.2949 MB
Line attenuation:
DS Line Attenuation: 11 DS Margin: 12
US Line Attenuation: 7 US Margin: 5
Memory usage:
In active use : 69% of 6212 kb
Available : 31% (1936 kb) of 6212 kb (of which 1788 kb is marked as "Inactive" and 148 kb is free)
Environment fragmentation:
Fragmentation level is "10" (out of 52 records). The threshold is "30".
Connection information: connection1
User avatar
Pondera
Experienced
Experienced
Posts: 254
Joined: Sun Mar 25, 2007 4:06 pm
Location: Brindisi (Italy)

Re: RouterTech Firmware 2.95 Discussion

Post by Pondera » Sat Jan 15, 2011 8:55 am

benobi wrote: Flash type: Intel; Manufacturer=Unknown!.
@thechief
Have you solved this incompatibility?
User avatar
thechief
RouterTech Team
RouterTech Team
Posts: 12066
Joined: Wed Feb 01, 2006 10:22 pm
Location: England, the Centre of Africa
Contact:

Re: RouterTech Firmware 2.95 Discussion

Post by thechief » Sat Jan 15, 2011 8:57 am

There are a number of problems here:
1. You have one of those troublesome "unknown" Intel flash chips. Nothing can be done about that. But when the chip plays up, you have your work cut out.
2. The environment is fragmented. You need to defragment it
3. The mtd partitions (mtd0 and mtd1) sizes are not correct for v2.95, so you need to correct them (you can do this with the pctool).

Conclusion: upgrading requires using the pctool.
The Chief: :afro: Be sure to read the Firmware FAQ and do a Forum Search before posting!
No support via PM. Ask all questions on the open forum.
User avatar
thechief
RouterTech Team
RouterTech Team
Posts: 12066
Joined: Wed Feb 01, 2006 10:22 pm
Location: England, the Centre of Africa
Contact:

Re: RouterTech Firmware 2.95 Discussion

Post by thechief » Sat Jan 15, 2011 8:59 am

Pondera wrote:
benobi wrote: Flash type: Intel; Manufacturer=Unknown!.
@thechief
Have you solved this incompatibility?
You mean this hardware bug. The answer is "No".
The Chief: :afro: Be sure to read the Firmware FAQ and do a Forum Search before posting!
No support via PM. Ask all questions on the open forum.
mstombs
RouterTech Team
RouterTech Team
Posts: 3753
Joined: Wed Jan 10, 2007 11:54 pm

Re: RouterTech Firmware 2.95 Discussion

Post by mstombs » Sat Jan 15, 2011 9:07 am

@benobi

You do not appear to have mtd4 defined - so no chance of web upgrade, it must have been defined in past and deleted?
MTD
dev: size erasesize name
mtd0: 00167000 00010000 "mtd0"
mtd1: 00078f70 00010000 "mtd1"
mtd2: 00010000 00002000 "mtd2"
mtd3: 00010000 00010000 "mtd3
User avatar
thechief
RouterTech Team
RouterTech Team
Posts: 12066
Joined: Wed Feb 01, 2006 10:22 pm
Location: England, the Centre of Africa
Contact:

Re: RouterTech Firmware 2.95 Discussion

Post by thechief » Sat Jan 15, 2011 12:39 pm

mstombs wrote:You do not appear to have mtd4 defined - so no chance of web upgrade
Well spotted! And no chance of any other kind of upgrade for that matter. mtd1 is set up for single-image upgrades, yet there is no mtd4. So you can't do a single-image upgrade, and you can't do a separate-images upgrade either.
You first need to do this from telnet

Code: Select all

setenv mtd4 0x90010000,0x901f0000
Then you might be able to upgrade.
The Chief: :afro: Be sure to read the Firmware FAQ and do a Forum Search before posting!
No support via PM. Ask all questions on the open forum.
felixmarra
Regular
Regular
Posts: 52
Joined: Mon Dec 24, 2007 12:25 pm

Re: RouterTech Firmware 2.95 Discussion

Post by felixmarra » Sat Jan 15, 2011 2:43 pm

I'm still confused about the mtd dimensions.

Mine are now:
mtd0 0x90090000,0x903f0000
mtd1 0x90010090,0x90090000
mtd2 0x90000000,0x90010000
mtd3 0x903f0000,0x90400000
mtd4 0x90010000,0x903f0000

And I was able to flash from 2.94 to 2.95 via web gui. Are they correct?

EDIT:

MTD
dev: size erasesize name
mtd0: 00360000 00010000 "mtd0"
mtd1: 0007ff70 00010000 "mtd1"
mtd2: 00010000 00002000 "mtd2"
mtd3: 00010000 00010000 "mtd3"
mtd4: 003e0000 00010000 "mtd4
yiannis.zip
Novice
Novice
Posts: 35
Joined: Fri Dec 11, 2009 10:11 am

Re: RouterTech Firmware 2.95 Discussion

Post by yiannis.zip » Sat Jan 15, 2011 3:54 pm

I just noticed that on PLUSCOM AWR-7200, on the LAN Configuration page the 3 Ethernet interfaces appear as SSID1, SSID2, SSID3.

I do not know if this is normal or not, i just want to report it just in case.
SSID_ROUTERTECH_2011-01-15_164915.png
User avatar
thechief
RouterTech Team
RouterTech Team
Posts: 12066
Joined: Wed Feb 01, 2006 10:22 pm
Location: England, the Centre of Africa
Contact:

Re: RouterTech Firmware 2.95 Discussion

Post by thechief » Sat Jan 15, 2011 4:16 pm

felixmarra wrote:I'm still confused about the mtd dimensions.
If it is all working, then why are you worrying? If anything is not correct, you can be sure that Adam2 will let you know all about it.
The Chief: :afro: Be sure to read the Firmware FAQ and do a Forum Search before posting!
No support via PM. Ask all questions on the open forum.
User avatar
thechief
RouterTech Team
RouterTech Team
Posts: 12066
Joined: Wed Feb 01, 2006 10:22 pm
Location: England, the Centre of Africa
Contact:

Re: RouterTech Firmware 2.95 Discussion

Post by thechief » Sat Jan 15, 2011 4:17 pm

yiannis.zip wrote:I just noticed that on PLUSCOM AWR-7200, on the LAN Configuration page the 3 Ethernet interfaces appear as SSID1, SSID2, SSID3.

I do not know if this is normal or not, i just want to report it just in case.
It is normal. In theory, you can have multiple SSIDs. Whether it works in practice is another thing. I have never tried it, and don't intend to.
The Chief: :afro: Be sure to read the Firmware FAQ and do a Forum Search before posting!
No support via PM. Ask all questions on the open forum.
felixmarra
Regular
Regular
Posts: 52
Joined: Mon Dec 24, 2007 12:25 pm

Re: RouterTech Firmware 2.95 Discussion

Post by felixmarra » Sat Jan 15, 2011 4:27 pm

thechief wrote:If it is all working, then why are you worrying? If anything is not correct, you can be sure that Adam2 will let you know all about it.
just because i saw different values (even now u wrote a different value for mt4) and I was wondering why and which one is correct. I had a strange error connecting to the bootloader with CICLaMaB (something about memory setted up less than available) and after returning to original dlink firmware and then to 2.94 with tiupgrade that error disappeared.

Maybe it was something about a wrong mtd partition?
yiannis.zip
Novice
Novice
Posts: 35
Joined: Fri Dec 11, 2009 10:11 am

Re: RouterTech Firmware 2.95 Discussion

Post by yiannis.zip » Sat Jan 15, 2011 4:32 pm

thechief wrote:
yiannis.zip wrote:I just noticed that on PLUSCOM AWR-7200, on the LAN Configuration page the 3 Ethernet interfaces appear as SSID1, SSID2, SSID3.

I do not know if this is normal or not, i just want to report it just in case.
It is normal. In theory, you can have multiple SSIDs. Whether it works in practice is another thing. I have never tried it, and don't intend to.
Shouldn't there also exist Ethernet2,Ethernet3 and Ethernet4?
benobi
Novice
Novice
Posts: 16
Joined: Wed Aug 18, 2010 8:08 pm

Re: RouterTech Firmware 2.95 Discussion

Post by benobi » Sat Jan 15, 2011 6:02 pm

thechief wrote:
mstombs wrote:You do not appear to have mtd4 defined - so no chance of web upgrade
Well spotted! And no chance of any other kind of upgrade for that matter. mtd1 is set up for single-image upgrades, yet there is no mtd4. So you can't do a single-image upgrade, and you can't do a separate-images upgrade either.
You first need to do this from telnet

Code: Select all

setenv mtd4 0x90010000,0x901f0000
Then you might be able to upgrade.

Ill tell you what i did.
First (thanks for good advice) i logged in via telnet to 192.168.1.1 (root/Admin) and put :
'setenv mtd4 0x90010000,0x901f0000'

After that put command :

'setenv DEFRAG DEFRAG'

All seemed to be fine...
So i decided to upgrade via WWW

Upgrade process was fine ...but after that ....
I couldnt log in to my router (DSL-300T).
Only power led was turned on. Nothing more.
DHCP was not working....i set static IP (192.168.1.100) on laptop and tried to ping 192.168.1.1.
It was impossible. Reset button (on the router) didnt work.
It was horrible.... i thought my router gone :(
But....before i made this upgrade i downloaded RRT software.
After few hrs i tried RRT....
It was good move. I did it via RRT software.
Now i have 2.95 version installed.
All is fine.

Thank you very much for help !!!

Regards,

Benobi
Locked