I have a aztech dsl605ew
-
- Novice
- Posts: 12
- Joined: Sat Oct 08, 2011 6:28 am
I have a aztech dsl605ew
How i can install Routertech firmware in my router?
Plss Guide me Because im newbie
Sorry For Bad English Pilipino-
Plss Guide me Because im newbie
Sorry For Bad English Pilipino-
Re: I have a aztech dsl605ew
Run the RUC
Instructions are included in the download
Instructions are included in the download
I Wanna Live 'till I Die!
-
- Novice
- Posts: 12
- Joined: Sat Oct 08, 2011 6:28 am
Re: I have a aztech dsl605ew
Thanks Sir! FeedBack Later!Alan wrote:Run the RUC
Instructions are included in the download
-
- Novice
- Posts: 12
- Joined: Sat Oct 08, 2011 6:28 am
Re: I have a aztech dsl605ew
Router Upgrade Check 1.4.1 09/10/2011 00:48:08
Router IP: 192.168.1.1
CLI is needed
Description: Aztech DSL 605EW (Asian, Dual Antenna)
Board type: AR7WRD
Product ID: AR7WRD
Bootloader: psbl
RAM 16.0 MB
Flash (ROM) 4.0 MB
ADAM2: No
No default env: No
Linux version: 2.4.17_mvl21-malta-mips_fp_le
Firmware build: 080707
Firmware version: 3.7.0
Firmware stamp: 20080707101018
CPU: MIPS 4KEc V4.8
DSP: 7.02.03.00
Annex: A
/proc/wlan: Yes
/usr/sbin/wlan: Yes
TIAP: Yes
TNETW: Yes
Wireless: Yes
WIFI chip: TNETW1350A
WIFI chip conf: Yes
Ports: 4
Ports (according to router): N/A
Marvell (or Marvell like): No
NSP: 3.7.0
Manufacturers: Aztech Systems Ltd
RNDIS: Aztech Systems Ltd
HRNDIS: Aztech Systems Ltd
NOTE: Only use version 2.9 or later of the RouterTech firmware for your router.
WARNING
Your router does not have a Marvell switch and so your switch may or may not be supported.
Realtek and IP175C switches are supported in the TNETW1350A firmware. Your Ethernet ports may or may not function correctly with a RouterTech firmware.
Select an AR7WRD PSPBOOT TNETW1350A 4 PORT firmware.
Latest: routertech-ar7wrd-1350A-pspboot-firmware-4ports-20110502.zip
Please read the instructions that come with the firmware files before you upgrade.
Note: a later version of the firmware may exist depending on the how up to date the RUC is.
The date-stamp may be superseded, but the rest of the filename should be the same.
According to your current MTD values, you should be able to upgrade using a single firmware image.
Router IP: 192.168.1.1
CLI is needed
Description: Aztech DSL 605EW (Asian, Dual Antenna)
Board type: AR7WRD
Product ID: AR7WRD
Bootloader: psbl
RAM 16.0 MB
Flash (ROM) 4.0 MB
ADAM2: No
No default env: No
Linux version: 2.4.17_mvl21-malta-mips_fp_le
Firmware build: 080707
Firmware version: 3.7.0
Firmware stamp: 20080707101018
CPU: MIPS 4KEc V4.8
DSP: 7.02.03.00
Annex: A
/proc/wlan: Yes
/usr/sbin/wlan: Yes
TIAP: Yes
TNETW: Yes
Wireless: Yes
WIFI chip: TNETW1350A
WIFI chip conf: Yes
Ports: 4
Ports (according to router): N/A
Marvell (or Marvell like): No
NSP: 3.7.0
Manufacturers: Aztech Systems Ltd
RNDIS: Aztech Systems Ltd
HRNDIS: Aztech Systems Ltd
NOTE: Only use version 2.9 or later of the RouterTech firmware for your router.
WARNING
Your router does not have a Marvell switch and so your switch may or may not be supported.
Realtek and IP175C switches are supported in the TNETW1350A firmware. Your Ethernet ports may or may not function correctly with a RouterTech firmware.
Select an AR7WRD PSPBOOT TNETW1350A 4 PORT firmware.
Latest: routertech-ar7wrd-1350A-pspboot-firmware-4ports-20110502.zip
Please read the instructions that come with the firmware files before you upgrade.
Note: a later version of the firmware may exist depending on the how up to date the RUC is.
The date-stamp may be superseded, but the rest of the filename should be the same.
According to your current MTD values, you should be able to upgrade using a single firmware image.
-
- Novice
- Posts: 12
- Joined: Sat Oct 08, 2011 6:28 am
-
- Novice
- Posts: 12
- Joined: Sat Oct 08, 2011 6:28 am
Re: I have a aztech dsl605ew
Help me!
- thechief
- RouterTech Team
- Posts: 12067
- Joined: Wed Feb 01, 2006 10:22 pm
- Location: England, the Centre of Africa
- Contact:
Re: I have a aztech dsl605ew
Use the web interface to upgrade, or use the PCTool (v2.4). Read the firmware FAQ.
The Chief: Be sure to read the Firmware FAQ and do a Forum Search before posting!
No support via PM. Ask all questions on the open forum.
No support via PM. Ask all questions on the open forum.
-
- Novice
- Posts: 12
- Joined: Sat Oct 08, 2011 6:28 am
Re: I have a aztech dsl605ew
I try but I can`t Find The download button?
See This Screenshots!
See This Screenshots!
- thechief
- RouterTech Team
- Posts: 12067
- Joined: Wed Feb 01, 2006 10:22 pm
- Location: England, the Centre of Africa
- Contact:
Re: I have a aztech dsl605ew
Did you click on "Send file" ?
The Chief: Be sure to read the Firmware FAQ and do a Forum Search before posting!
No support via PM. Ask all questions on the open forum.
No support via PM. Ask all questions on the open forum.
-
- Novice
- Posts: 12
- Joined: Sat Oct 08, 2011 6:28 am
Re: I have a aztech dsl605ew
Sir Thanks alot I Upgrade My Firmware into Routertech firmware ..... But i cant Set up my wireless in my internet Because Its Automaticaly Redecting into The portal of Provider? how i can fix it?
but In my computer the internet is normal and working.. only in wireless is not working because of automatic redecting to portal so i cant browse because its lock in portal..
but In my computer the internet is normal and working.. only in wireless is not working because of automatic redecting to portal so i cant browse because its lock in portal..
-
- Novice
- Posts: 12
- Joined: Sat Oct 08, 2011 6:28 am
Re: I have a aztech dsl605ew
Sorry For Bad English :
- thechief
- RouterTech Team
- Posts: 12067
- Joined: Wed Feb 01, 2006 10:22 pm
- Location: England, the Centre of Africa
- Contact:
Re: I have a aztech dsl605ew
First of all, clear your browser's cache. If that doesn't work, then post the output of the RouterTech firmware's System Diagnostics ("Tools" menu).
The Chief: Be sure to read the Firmware FAQ and do a Forum Search before posting!
No support via PM. Ask all questions on the open forum.
No support via PM. Ask all questions on the open forum.